Titan Attachments LRAKE4v2 User manual

MPN(s):LRAKE4v2, LRAKE5v2, LRAKE6v2
SKU(s): 191348, 191349,191350
UPC(s): 840009207655, 840009207662, 840009207679

2
CAUTION
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE
THOROUGHLY UNDERSTOOD BEFORE ATTEMPTING TO BEGIN ASSEMBLING
THIS MACHINE
1. Select an area for assembly that is clean and free of any debris which might
cause persons working on the assembly to trip.
2. Do not lift heavy parts or assemblies. Use crane, jack, tackle, fork trucks or
other mechanical devices.
3. Preview the assembly instructions in your operator’s manual before
proceeding further.
4. If the assembly instructions call for parts or assemblies to be blocked up, use
only blocks material that is good condition and can handle the weight of the
assembly to be blocked. Also ensure that the blocking material is on a clean,
dry surface.
5. Never put hands, or any part of body, under blocked up assemblies if possible.
6. After completing assembly, thoroughly inspect the machine to be sure that all
nuts, bolts, hydraulic fittings, or any other fastened assemblies have been
thoroughly tightened.
7. Before operating the machine, thoroughly read the operation section of your
operator’s manual.
8. Before operating, read the machine section of your operator’s manual to be
sure that any parts requiring lubrication, such as gearbox, to avoid any
possible damage.
9. Before operating equipment – if you have any questions regarding the proper
assembly or operation, contact you dealer or representative.

3
EQUIPMENT SAFETY GUIDELINES
1. Never use alcoholic beverages or drugs which can hinder alertness or
coordination while operating this equipment. Consult your doctor about
operating this machine while taking prescription medications.
2. Review the safety instructions with all users annually.
3. This equipment is dangerous to children and persons unfamiliar with its
operation. The operator should be a responsible adult familiar with farm
machinery and trained in this equipment’s operations. Do not allow persons to
operate or assemble this unit until they have read this manual and have
developed a thorough understanding of the safety precautions and of how
works.
4. Never exceed the limits of a piece of machinery.
5. Do not modify the equipment in any way. Unauthorized modification may impair
the function and could affect the life of equipment.
OPERATIONAL SAFETY
1. The use of this equipment is subject to certain hazards which cannot be
protected against by mechanical means or product design. All operators of this
equipment must read and understand this entire manual, paying particular
attention to operating, prior to using. If there is something in this manual you do
not understand, ask your supervisor, or your dealer, to explain it to you.
2. Personal protection equipment including hard hat, safety glasses, safety shoes,
and gloves are recommended during assembly.
3. Never permit any person other than the operator to ride or board the tractor or
implement at any time. Never allow anyone to ride on the implement!
4. A heavy load can cause instability in driving a tractor. Make sure the front or rear
of the tractor is properly counter-balanced with weights, always drive slowly-
especially around turns. An unstable tractor could steer badly and possibly tip
over, causing injury or death.
5. Most accidents occur because of neglect or carelessness. Keep all helpers and
bystanders at a safe distance.
6. Use stabilizer bars, adjustable sway chains, or sway blocks on your tractor lift
arms to keep the rear blade from swinging side to side. Adjust as tightly as
practical for best performance.

4
7. Do not operate close to ditches or creeks. Slow down when operating over rough
ground.
8. When adjusting the angle of the moldboard assembly, be sure that your feet are
never under the rear blade.
9. Be careful to avoid catching the rear blade on stumps or other immovable
objects.
MAINTENANCE SAFETY
1. Keep all persons away from operator control area while performing
adjustments, service, or maintenance.
2. Periodically tighten all bolts, nuts and screws and check that all cotter pins are
properly installed to ensure unit is in a safe condition.
3. Never use your hands to locate a hydraulic leak on attachments. Use a small
piece of cardboard or wood.
4. Never replace hex bolts with less than grade five bolts unless otherwise
specified. Refer to bolt torque chart for head identification marking.
STORAGE SAFETY
1. Store the unit in an area away from human activity. Do not permit children to
play on or around the stored unit.
2. Make sure all parked machines are on a hard, level surface and engage all safety
devices.
3. If blocking is used, make sure it is solid and secure before leaving area. ALWAYS
OBEY ALL SAFETY RULES! ALWAYS BE CAREFUL!
ALWAYS OBEY ALL SAFETY RULES!
ALWAYS BE CAREFUL!

5
KEY
DESCRIPTION
QTY
KEY
DESCRIPTION
QTY
(1) RAKE TOOTH VARY (11) BOLT M16X50 1
(2) TINE BAR WELDMENT 1 (12) LOCK NUT 1
(3) DRAW BAR PIN 2 (13) MOUNT FRAME WELDMENT 1
(4)
TOP LINK BAR
2
(14)
LOCK NUT
VARY
(5)
SPRING WASHER 22
2
(15)
FLAT WASHER
VARY
(6) FLAT WASHER 22 2 (16) BOLT M10X30 VARY
(7) NUT M22 2 (17) SPRING WASHER 1
(8) BRACE 1 (18) FLAT WASHER 1
(9)
BOLT M16X100
1
(19)
TOOTH SUPPORT
VARY
(10)
NUT M10
1

6
This concludes the LRAKEv2 Owner’s Manual.
If applicable to your product, make sure to tighten all
nut-and-bolt combinations before use.
Enjoy!
DISCLAIMER
This equipment must be used with care by capable and competent individuals under supervision, if necessary.
The use of any equipment, including this one, involves the potential risk of injury. You accept and assume full
responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may
occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and
agents from any and all claims, demands, damages, rights of action, or causes of action, present or future, whether the
same be known or unknown, anticipated, or unanticipated, resulting from or arising out of the use of said equipment.
TITAN MAKES NO WARRANTY WHATSOEVER WITH RESPECT TO THE EQUIPMENT, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, WHETHER EXPRESS OR IMPLIED BY LAW,
COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE. BUYER ASSUMES ALL LIABILITY IN
USE OF THE EQUIPMENT.
NEED HELP?
CONTACT US FIRST.
1 (800) 605-8241
info@titandistributorsinc.com /
Business Hours: Monday–Friday • 8:00 a.m.–5:00 p.m. (CT)
This manual suits for next models
8
Table of contents
Other Titan Attachments Lawn And Garden Equipment manuals