Gardeners 8613058 User manual

OVER THE TOP CUCUMBER TRELLIS GREEN
PARTS LIST
(2) Side Panel (With Sleeve):46" H x 16" W
(2) Side Panel (With Pin): 46" H x 16" W
(1) Top Panel (With Sleeve): 46" H x 16" W
(1) Top Panel (With Pin): 46" H x 16" W
(2) Spike: 48"H
(4) Earth Staples
NOTE: Assembly is best with two people. It is easiest to assemble your trellis on the ground. Choose a
flat, clean surface to execute your assembly.
Step 1. Insert side panel(with pin) into the side panel(with sleeve). Make sure the U-shaped clips of both
panels are on the upper side. Repeat this process for the other side panel as well.
U-shaped clips
Side Panel
(With Sleeve)
46" H x 16" W
Side Panel
(With Pin)
46"H x 16" W
Step 2. Insert top panel(with pin) into top panel(with
sleeve).
Side Panel
Assembled:
46"H x 32" W
U-shaped clips
Top Panel (With Pin) Top Panel (sleeve) Top Panel Assembled: 46" H x 32" W
Turn over please

Step 3. Insert the assembled top panel into the U-shaped clips on one of the side panels. Repeat the same
with the other side panel.
Step 4. Finally, adjust the spikes on the opposite corners of the top panel and then insert the spikes into
the ground.
Step 5. Insert one earth staple in each, bottom corner of the side panels for added stability.
For more gardening accessories, information and articles, please
visit us at gardeners.com.
# 8613058-GR 08/2023
Spikes: 48" including
prongs
Earth Staples
ASSEMBLED
We recommend angling the sides of your trellis out
approximately 130 – 140 degrees