Titan Lifts MD-1250-XL Instruction manual

INSTALLATION, OPERATION,
& MAINTENANCE MANUAL
MODEL:
MD-1250-XL
1,250 LB MOTORCYCLE DOLLY
FOLLOW THIS MANUAL CAREFULLY TO ENSURE THE MACHINE WILL
FUNCTION CORRECTLY AND PROVIDE MANY YEARS OF DEPENDABLE SERVICE.
FAILURE TO FOLLOW THESE INSTRUCTIONS AND SAFETY WARNINGS MAY
RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE. USE OF STRAPS IS
RECOMMENDED - SOLD SEPARATELY. KEEP THIS MANUAL IN A SAFE DRY PLACE
FOR FUTURE REFERENCE.
®

PO Box 7069 Greenwood, IN 46142
1.888.908-4826 FAX [phone]
www.titanlifts.com
TITAN MARKETING, LLC
®
To Our Valued Customers:
Thank you for purchasing a Titan Lifts®product. We hope this high quality equipment provides you with years of
dependable service.
It is unfortunate that rare situations may occur with the products you purchase from Titan Lifts®. We value your
business as well as the trust you have and need to maintain your relationship with us. Titan Lifts®carries liability
coverage that may protect our customers if a situation does occur. However, as in all accidents there must be
proof of liability for a claim to be made. Our insurance company requires the following procedures be observed in
order to consider a claim:
A. The claimant must contact the Titan Lifts®distributor immediately with the facts of the situation.
B. If any equipment is damaged, including vehicles or shop equipment, Titan Lifts®must be given the
opportunity to send an impartial representative to the site for proper assessment of the situation.
C. The Vehicle cannot be moved until either an impartial representative has reviewed the accident or clear
and precise pictures are taken that reect all the pertinent information for an impartial representative to be able
to access the information from a distance. Titan Lifts®or its representatives must approve the pictures before
anything can be moved.
D. If any potential liability is determined on behalf of Titan Lifts®, two estimates must be submitted for
damages to be reimbursed.
It is imperative that the claimant complies with these procedures, because without proper assessment of the
situation a claim will be denied.
ARBITRATION NOTICE
The installation or use of this equipment shall constitute an acknowledgement that the user agrees to resolve any
and all disputes or claims of any kind whatsoever, which relate in any way to the equipment, by way of binding
arbitration, not litigation. No suit or legal action may be led in any state or federal court. Any arbitration shall be
governed by the Federal Arbitration Act, and administered by the American Mediation Association, Indianapolis
Indiana. The maximum amount that an arbitrator may award and all damages shall not exceed the retail value of
this equipment.
WARRANTY NOTICE
This equipment must be assembled and used in the manner according to the documentation provided to be
covered by warranty.
Damaged or missing components must be reported within 72 hours of receipt to your freight carrier and to the
distributor. Claims must be led to cover cost.
If you have any questions or if we can be of any further assistance, please don’t hesitate to contact a Titan Lifts®
representative at 1-888-908-4826. Thank you for the opportunity to continue to serve your lift equipment needs.

CONTENTS
INSTRUCTIONS ..............................................................................................................1
ASSEMBLY.....................................................................................................................1
OPERATION & MAINTENANCE.........................................................................................1
SAFETY PRECAUTIONS ..................................................................................................1
PARTS LIST (FIG. 1) ........................................................................................................2

OPERATION & MAINTENANCE
1. All moving parts have been lubricated at the factory and should be re-lubricated before the rst use
and at least once every six months to prevent damage.
2. Do not use this product if worn or damaged. Examine dolly for structural cracks, bends, or other signs
of damage prior to each use to ensure safe proper working condition.
3. Keep the dolly clean, dry, and well maintained to extend longevity of the product.
4. When not in use, the dolly must be stored in a dry location.
ASSEMBLY
1. Attach the Caster Assembly (2) to Frame Assembly (1) and Side Kickstand Tray (17) by using Hex Bolt
M6 (3), Washers (4), Lock Washers (5) and Nut M6 (6). Secure rmly.
2. Attach the Connecting Plate (7) to the two side of Stopping Ramp A (9). Then attach the Connecting
Plate (7) to the Frame Assembly (1) by using the Cheese Head Bolt (8), Washers (4), Lock Washers (5)
and Nut M6 (6). Repeat for Stopping Ramp B (18).
3. Connect the two Frame Assemblies (1) with the Connecting Pipes (16), then secure them by using Bolt
M8 (11), Washer (12), Lock Washer (13) and Nut M8 (14).
4. Lastly, t the Side Kickstand Tray (17) to the Frame Assembly (1) by using Bolt M8 (15) Washer (12),
Lock Washer (13) and Nut M8 (14). Attach two Stop Pins (10) to the slots on each end of the Frame
Assembly (1), Tighten all connecting points.
SAFETY PRECAUTIONS
1. Load should not exceed rated capacity for this dolly – 1250 lbs
2. Only trained people should operate the dolly.
3. Indoor use recommended.
4. Do not make any modications to the dolly.
5. Keep hands, tools, and other extremities from any moving parts.
6. Maintain a safe working environment. The work area should be clean, dry, clutter free, and suciently
lit.
7. Wear proper safety attire. Do not wear loose tting clothing while operating. Long hair, sleeves and
other loose articles should be secured.
8. Keep children and bystanders away from work area. Do not let children operate or play on dolly.
9. Do not use if under the inuence of drugs or alcohol. Operator must be alert at all times.
10. Never use the dolly with someone on it.
11. This dolly is designed for carrying motorcycles. Do not use this product for an application for which it
was not designated. Misuse can lead to personal injury and/or property damage.
INSTRUCTIONS
WARNING: READ ENTIRE MANUAL AND COMPLY WITH ALL SAFETY AND
SERVICE PRECAUTIONS. DEATH, PERSONAL INJURY AND / OR PROPERTY
DAMAGE MAY OCCUR IF INSTRUCTIONS ARE NOT FOLLOWED CAREFULLY.
UNPACKING AND SET-UP *REFER TO PARTS LIST FIG. 1
1. Carefully unpack the dolly making sure that all of the parts have been included.
2. Make sure to use the dolly on a clean, smooth solid surface that is capable of sustaining the load.
3. Place both stopping ramps in the down position prior to loading.

PARTS LIST (FIG. 1)
1
4
6
3
2
5
9
10
7
16
11
13
12
14
15
17
8
4
65
18
16
10
11
1
NO. DESCRIPTION QTY NO. DESCRIPTION QTY
01 FRAME ASSEMBLY 2 10 STOP PIN 2
02 CASTER ASSEMBLY 511 BOLT M8 8
03 HEX BOLT M6 20 12 WASHER M8 10
04 WASHER M6 28 13 LOCK WASHER M8 10
05 LOCK WASHER M6 28 14 NUT M8 10
06 NUT M6 28 15 BOLT M8 2
07 CONNECTING PLATE 4 16 CONNECTION PIPE 2
08 PAN HEAD BOLT M6 8 17 SIDE KICKSTAND TRAY 1
09 STOPPING RAMP A 1 18 STOPPING RAMP B 1

P.O. Box 7069 • Greenwood, IN 46142 • Ph. 888-908-4826 • Fx. 317-215-2770 • www.titanlifts.com
LIMITED WARRANTY
The Titan 2 Post lifts and 4 Post lifts are backed by a standard 1 year replacement parts warranty and a 5 year structural
warranty from the date of purchase, to the original purchaser only. The 1 year replacement parts warranty covers power
units, hydraulic cylinders, and all other assembly components such as, but not limited to: turn plates, slip plates, cables,
chains, valves, switches etc. This does not cover normal wear items such as but not limited to rubber lifting pads and nylon
slide blocks. Titan HD2P-9000ACE-D and HD2P-9000AFE 2 Post lifts are backed by a 2 year replacement parts warranty
and a 5 year structural warranty from the date of purchase, to the original purchaser only. The 2 year replacement parts
warranty covers power units, hydraulic cylinders, and all other assembly components such as, but not limited to: turn
plates, slip plates, cables, chains, valves, switches etc. This does not cover normal wear items such as but not limited to
rubber lifting pads and nylon slide blocks.
Titan Mid Rise Scissor lifts are backed by a standard 1 year replacement parts warranty and a 5 year structural warranty
from the date of purchase, to the original purchaser only. The 1 year replacement parts warranty covers power units,
hydraulic cylinders, and all other assembly components such as, but not limited to: turn plates, slip plates, cables, chains,
valves, switches etc. This does not cover normal wear items such as but not limited to rubber lifting pads and nylon slide
blocks.
Titan Standard Duty and Heavy Duty motorcycle lifts are backed by a standard 1 year replacement parts warranty from
the date of purchase, to the original purchaser only. The 1 year replacement parts warranty covers power units, hydraulic
cylinders, pneumatic cylinders, and all other assembly components such as, but not limited to: cables, caster wheels,
valves, switches, wheel vises etc. This does not cover normal wear items such as but not limited to rubber wheel vise pads.
Titan Bulldog Moto Cradle Wheel Chock is warrantied for replacement parts, only to the original purchaser, for a period of 2
years from the date of purchase.
XL Tool by Titan Wheel Service Machines and Helper Arm Assemblies are backed by a standard 1 year replacement parts
warranty from the date of purchase, to the original purchaser only. The 1 year replacement parts warranty covers internal
boards, motors, pneumatic cylinders, and all other assembly components such as, but not limited to: cabinet, switches,
valves, ttings etc. This does not cover normal wear items such as but not limited to: rubber pads, jaw protectors, air hoses,
quick nut assemblies.
Titan shop equipment products and accessories are warrantied for replacement parts only to the original purchaser for
a period of 90 days from the date of purchase. This 90 day replacement parts warranty covers products such as but not
limited to: EZ -Mover Jacks, Mini Jacks, tie down products, wheel service accessories, Bulldog Moto Cradle Wheel Chock
accessories, dollies, stands, Light Duty Motorcycle Lifts, etc.
For all warranty considerations, Titan Marketing, LLC will supply replacement parts only during the warranty period. The
original purchaser is responsible for all shipping, handling, and any labor charges incurred. All defective parts must be
returned to Titan for inspection and examination. Any parts that are found to be defective will be replaced or repaired
to proper working order. Other items not listed above may be considered general wear parts and therefore, will not be
covered under warranty. These warranties do not extend to defects caused by ordinary wear, abuse, misuse, shipping
damage, improper installation, voltage or lack of required maintenance. Titan Marketing, LLC is not to be held responsible
for any failure that results from an accident, purchaser/operator abuse, neglect, or failure to operate products in
accordance with instructions provided in the owner’s manual(s) supplied. Damage caused by rain, excessive humidity,
corrosive environments or other contaminants are not covered under warranty. THESE WARRANTIES DO NOT EXTEND
TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION OF
A TITAN MARKETING LLC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.

EQUIPMENT MODEL:
TYPE OF POWER UNIT:
DATE OF PURCHASE:
PLACE PURCHASED:
NAME:
STREET:
CITY, STATE, ZIP:
PHONE:
EMAIL:
SERIAL NUMBER:
SERIAL NUMBER:
WARRANTY REGISTRATION
OPT OUT OF PROMOTIONS
In order to utilize the warranty on this Titan Lifts product, you must register your product with us. The
simplest way to do this is to visit TITANLIFTS.COM/WARRANTIES and submit your information online. If you
prefer to send your information through the mail, please ll out the form below and send this page to us at :
Titan Lifts
PO Box 7069
Greenwood, IN 46142
In order to receive your warranty, return this card
or visit TITANLIFTS.COM/WARRANTIES within 30 days.

NOTES

NOTES

NOTES

WARNING
The warnings, precautions and instructions in this manual cannot
cover all possible conditions and situations that may occur. The
operator must understand that the operator must supply common
sense and examine caution factors when using this product to
determine safety in all circumstances being used.
Copyright © 2016 by Titan Marketing, LLC. All rights reserved. No portion of this manual or any artwork contained herein may be
reproduced in any shape or form without the express consent of Titan Marketing, LLC. Diagrams within this manual may not be
drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools
required for assembly and service may not be included.
REVISION 1
®
PO Box 7069 Greenwood, IN 46142
1.888.908-4826 FAX [phone]
www.titanlifts.com
TITAN MARKETING, LLC
Patent No.: US 8,104,588 B2
CA 2,729,670