Tivoli Audio SSTPE User manual

INSTALLATION INSTRUCTIONS
Thank you for your purchase. In three easy steps you will be enjoying
stereo sound from your Tivoli Audio radio:
1. Connect the Top-Firing Speaker, Front-Firing Speaker, or Dual
Alarm Speaker’s audio cable to your main unit’s rear female RCA
output labeled “R-SPR”.
2. Set the main unit’s rear balance control to the center detent position.
3. Set the main unit’s rear Mono/Stereo switch to the Stereo position.
Turn your Tivoli Audio radio on and adjust the volume level to the
desired position
We suggest placing this secondary speaker at least 5 feet from the
main unit for best stereo imaging. This speaker is video shielded and
can be used in close proximity to a computer monitor or TV. Using this
speaker in a manner other than described above voids your warranty
and could result in damage to the speaker.
As always, please contact your dealer or Tivoli Audio if you have
any questions.
Tivoli Audio
Seaport Center
70 Fargo Street, Suite 900
Boston, MA 02210 USA
1.877.297.9479
www.tivoliaudio.com
[email protected]
Variations in color and grain are characteristics of real wood and give the cabinet its natural beauty. As a result, the cabinet’s finish may not match the wood
on other Tivoli Audio products. Also note some cabinet finishes, particularly walnut, can darken over time to light exposure. This too, is normal for a natural
wood product. All prices, features, specifications and availability are subject to change without notice. Tivoli Audio and the Tivoli Audio logo are trademarks
of Tivoli Audio, LLC.
SS1108