TLS DCV300 User manual
DCV300
300W DMX LED DRIVER
OPERATORS MANUAL
V6.0
Contents
1.0 –Warnings ..................................................................................................................................3
1.0.1 –Read Me..................................................................................................................................3
1.0.2 –Power ......................................................................................................................................4
1.0.3 –IP Rating ..................................................................................................................................4
2.0 –Installation......................................................................................................................................4
2.0.1 –Location...................................................................................................................................4
2.0.2 –Fixings......................................................................................................................................4
2.0.3 –Power ......................................................................................................................................4
2.0.4 –Data.........................................................................................................................................4
2.0.4.1 - DMX ..................................................................................................................................4
2.0.4.2 - Connectors........................................................................................................................4
2.0.5 –LED Connections......................................................................................................................5
2.0.5.1 –Correct Procedure............................................................................................................5
2.0.5.2 –Short Circuit Error ............................................................................................................5
3.0 –User Interface Settings...................................................................................................................5
3.0.1 –accessing the UI.......................................................................................................................5
3.0.2 –System Modes.........................................................................................................................5
3.0.3 –Changing the DMX address.....................................................................................................5
3.0.4 –Changing the LED mode (RGBW/RGB, CCT)............................................................................6
3.0.7 –Auto Modes & Settings ...........................................................................................................6
4.0 UI Illumination...................................................................................................................................6
4.0.1 Display Illumination Settings –Only on select models ..............................................................6
1.0 –Warnings
1.0.1 –Read Me
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
•Before the initial start-up, please make sure that there is no damage caused during
transportation.
•Should there be any damage, consult your dealer and do not use the equipment.
•To maintain the equipment in good working condition and to ensure safe operation, it is
necessary for the user to follow the safety instructions and warning notes written in this manual.
•Please note that damages caused by user modifications to this equipment are not subject to
warranty.
•This product is designed to be installed by a competent, qualified installation technician into
commercial environments.
•Never let the power cable come into contact with other cables. Handle the power cable and all
mains voltage connections with particular caution!
•Never remove warning or informative labels from the unit.
•Do not open the equipment and do not modify the unit.
•Do not connect this equipment to a dimmed power supply.
•Do not switch the equipment on and off in short intervals, as this will reduce the system’s life.
•Only use the equipment indoors.
•Do not expose to flammable sources, liquids or gases.
•Always disconnect the power from the mains when equipment is not in use or before cleaning!
Only handle the power-cable by the plug. Never pull out the plug by pulling the power-cable.
•Make sure that the power cable is never crimped or damaged. Check the equipment and the
power cable periodically.
•If the equipment is dropped or damaged, disconnect the mains power supply immediately and
have a qualified engineer inspect the equipment before operating again.
•If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation),
do not connect power or switch it on immediately. The arising condensation might damage the
equipment. Leave the equipment switched off until it has reached room temperature.
•If your product fails to function correctly, stop use immediately. Pack the unit securely
(preferably in the original packing material) and return it to your supplier for service.
•Only use fuses of same type and rating.
•Repairs, servicing and power connection must only be carried out by a qualified technician.
•THIS UNIT CONTAINS NO USER SERVICEABLE PARTS.
•WARRANTY: One year from date of purchase.
OPERATING DETERMINATIONS
If this equipment is operated in any other way than that described in this manual, the product may
suffer damage and the warranty become void. Incorrect operation may lead to hazards, short-circuit,
burns and electric shocks etc. Do not endanger your own safety or the safety of others! Incorrect
installation or use can cause serious damage to people and/or property.
1.0.2 –Power
The DCV1200 is designed with 2 common positive terminals on each port, the 1200W load should be
spread across these terminals evenly to ensure the phoenix connectors do not burn out.
1.0.3 –IP Rating
The DCV1200 is IP20 rated and must be used indoors and in a dry environment.
2.0 –Installation
2.0.1 –Location
Please ensure the DCV1200 is installed in a cool dry place, operated by qualified people, and always
make sure cables are not taut once installed.
2.0.2 –Fixings
The DCV1200 requires 4 securely mounted screws to hold it in place in a rack or placed on a stable
surface. Items damaged by improper installation are not covered under the warranty.
2.0.3 –Power
The DCV1200 requires a 240V AC connection with the powercon provided. Please ensure this is
pushed in fully to avoid arcing. Please also ensure the power cable is not taut and has not been
damaged during transit.
2.0.4 –Data
2.0.4.1 - DMX
When connecting the data to a DCV it is recommended that you use professional DMX cable to avoid
any signal issues. It is also recommended that the DMX chain is correctly terminated to avoid data
issues such as signal reflection.
2.0.4.2 - Connectors
Please use the 3 pin XLR sockets to connect the DMX.
2.0.5 –LED Connections
2.0.5.1 –Correct Procedure
When connecting Your LED tape to the DCV1200 please ensure the LED tape matches the voltage of
the DCV, the standard voltage for a DCV is 24V DC.
Please ensure you are connecting the correct terminals to the correct wires on the LED tape, wiring
the tape incorrectly can damage both pieces of equipment.
The common positive load should be split across the two common terminals on the DCV1200 to
avoid damaging the connector. You can connect a maximum of 150W per common terminal.
2.0.5.2 –Short Circuit Error
The short circuit error tells the user if a fault develops. This can be either:
1) Current overload. This is when a user has overloaded the DCV by connecting more than
1200W (150W per port) of lighting. This may only occur at certain points when the fixture is
pulling its maximum wattage.
2) Short Circuit. This can occur when the tape is wired incorrectly or if the tape is short
circuiting because it’s damaged or faulty. Another common cause of this is when the tails at
one end of the tape are touching and creating a short circuit.
3.0 –User Interface Settings
3.0.1 –accessing the UI
To access the UI power the DCV, hold down the “menu” key and press “enter”when prompted whist
maintaining a hold on the menu key.
This feature is on all DCV systems as a security feature to prevent accidental operator changes.
3.0.2 –System Modes
System mode enables different types of control and is set in the system mode menu which is
accessed by pressing the menu button repeatedly to cycle settings.
1. DMX –For DMX control.
2. Auto –For running stand alone.
3.0.3 –Changing the DMX address
Cycle menu until the display reads “System Mode” and press “enter”
Once you have accessed this screen and selected the DMX Mode you can select on of two options,
Individual mode for individual port control or unique for controlling everything the same.
Individual mode will offer each ports configuration, select the port, and change the address or port
mode, the DCV1200 operate in standard modes for 1-5 channels or 6 channels for a master dimmer
and 5 colour channels, whereas 7 channel mode offers master dimmer, strobe and 5 colour
channels, more info below
3.0.4 –Changing the LED mode (RGBW/RGB, CCT)
Cycle menu until the display reads “System Mode” and press “enter”
Select Individual for the following options,
Once you have accessed this screen the display will show options as follows PORT, DMX ADDR,
MODE, the last number is the mode and relates to below:
1. 5CH, all outputs operate (1 DMX channel)
2. 6CH, Dim + RGBWA
3. 7CH, Dim + Strobe + RGBWA
3.0.7 –Auto Modes & Settings
For standalone auto control.
1. Programmes 1 ~ 18 are various colours with brightness control, select colour and press enter
to change brightness
2. Program 19 is step change, flashing through colours with speed and dim control once prog is
selected
3. Program 20 is Cross fade, colour fading with speed and dim once program is selected
4. Program 21 is strobe with speed and dim once program is selected
5. Program 22 is colour chasing with dim and speed once program is selected
4.0 UI Illumination
4.0.1 Display Illumination Settings –Only on select models
1. Go to System Settings in the menu and scroll to backlight.
2. Options are between 10 –30 Seconds display light or Open which refers to on all the time.
For installation and technical support please contact us on 01603 295 011 or email
Table of contents
Other TLS Controllers manuals
