Toa A-9060DH User manual

9000 S ERIES
M ODULAR
D IGITAL M ATRIX
M IXER /A MPLIFIERS
A-9060S
A-9120S
A-9240SH
A-9060DH
A-9120DH
A-9120DL
M IXER
M-9000
The TOA 9000 Series Digital Matrix
Mixer/Amplifiers redefine the conven-
tional mixer/amplifier category by
combining a modular matrix mixer,
digital signal processor (DSP) and
amplifiers in a compact, two rack space
package. The versatile new series is
ideal for multi-zone paging, music
distribution and room-combining
applications.
9000 Series models include dual and
single channel amplifiers with high or
low impedance outputs plus a matrix
mixer-only version. Dual channel
amplifier models feature flexible
output power allowing 50% of one
amplifier channel to be allocated to the
second channel.
All models include eight module ports
allowing designers to easily configure
custom systems with up to eight mic/line
inputs and eight outputs. Each 9000
Series chassis has two channels of built-in
digital signal processing (DSP) with ten
band parametric EQ, compressor, eight-
level ducking and more. Input and
output modules provide additional DSP.
Two discrete operation modes,"Matrix"
and "Mixer", allow the 9000 Series to be
used in both simple mixing and complex
multi-zone paging applications.
Versatile features include telephone
zone paging, automatic microphone
mixing and ambient noise control.
Modules include the D-001T dual
channel mic/line input module, T-001T
dual channel line output module,
ZP-001T telephone access zone paging
module, C-001T control expansion
module, and AN-001T Ambient Noise
Control module. Accessories include the
AN-9001 ceiling/wall-mount microphone,
ZM-9001 and ZM-9002 remote panels,
and SS-9001 4-zone speaker selector.
The 9000 Series products are UL and
cUL Listed and backed with TOA’s five
year product warranty.
H IGHLIGHTS
M ODULES
D-001T Dual Mic/Line Input with DSP
T-001T Dual Line Output Expansion with DSP
ZP-001T Telephone DTMF Zone Paging
C-001T Input/Output Control Expansion
AN-001T Ambient Noise Control
A CCESSORIES
F EATURES
Modular Digital Matrix Mixer/Amplifiers for a multitude of applications including
audio-visual, zone paging, room combining and many more
Easy to Configure and Operate
Exceptional Audio Quality
24-bit, 48 kHz sampling
Ultra-Low Distortion – 0.0008%
Modular Mixer — up to 8 mic/line inputs and 8 outputs
Dual Channel Digital Signal Processor (DSP):
10-Band Parametric EQ High and Low Pass Filters Compressor
Loudness Contour Bass and Treble Delay (MIXER mode)
TOA Speaker EQ Presets Additional DSP included on D-001T and T-001T modules
Single or Dual Channel Power Amplifiers — 70.7 V, 25 V and low impedance models
Flexible Output Power — dual channel models allow 50% of either amplifier channel to be
allocated to the other channel (Ex. A-9060DH: CH1:90W, CH2:30W)
Dual Modes (MIXER and MATRIX) — two separate feature sets to suit both simple mixing and
complex multi-zone distribution applications
Telephone Zone Paging — access up to eight zones with optional ZP-001T module
Automatic Mic Mixing — automatically adjusts output level based on the total number of
open microphones (NOM)
Ambient Noise Control — automatically increase or reduce output levels in response to
changes in ambient noise
Multi-function Display allows programming and operation without a PC
Rack-mount Kit Included (2RU)
Five Year Warranty
AN-9001 Ceiling Mic for Ambient Noise Control
ZM-9001 Remote Switch Panel
ZM-9002 Remote Volume Switch Panel
SS-9001 4-Zone Speaker Selector
M ODULAR D IGITAL M ATRIX M IXER /A MPLIFIERS
A-9060S 1x 60W @ 25/70V, 4/8 ohms
A-9120S 1x 120W @ 25/70V, 4/8 ohms
A-9240SH 1x 240W @ 70V
A-9060DH 2x 60W @ 70V
A-9120DH 2x 120W @ 70V
A-9120DL 2x 120W @ 4-16 ohms
M ODULAR D IGITAL M ATRIX M IXER
M-9000 2x Line Level

9000 SERIES MODULAR DIGITAL MATRIX
MIXER AND MIXER/AMPLIFIERS
Tel: [phone]
Fax: [phone]
www.toaelectronics.com
F EATURES
MIXER Mode
Ideal for Speech and Sound Reinforcement Applications in
hotel meeting rooms, churches, and conference rooms
Automatic Mixing
Automatically adjusts output level based on the total number
of open microphones (NOM)
Adjustable output attenuation from 0 to 20 logNOM
32 Programmable Scenes — activate via front panel, switch
closure, RS-232 or optional remote panels, models ZM-9001 and
ZM-9002
Flexible Input-to-Output Routing — assign any input to one or
more outputs with adjustable cross-point gain
Stereo Link — control two inputs or outputs with one volume
control
Paging Function
Assign outputs to up to four zones
Trigger paging function with VOX (one zone), control
input (up to four zones) or optional ZP-001T module
Selectively disable outputs from programmed paging
zone with contact closures
Flexible Remote Control
Two Remote Volume Control Terminals
Assignable to any input or output channel
Control with 10k ohm linear potentiometer, 0-10 VDC
or optional ZM-9001/ZM-9002 remote panels
Assign remote volume control to background music (Priority 8)
inputs without affecting paging input volume
Four Control Inputs (expandable to twelve with C-001T module)
— programmable to activate Memory, Volume Up/Down, Mute,
Power On/Off, Emergency Mute or Synch On/Off
Four Control Outputs (expandable to twelve with C-001T
module) — programmable to activate external relays
synchronized with Memory, Channel On/Off and Power On/Off
RS-232 Port
Control protocol available for external devices (see protocol
for controllable parameters)
AMX and Crestron control modules available
MATRIX Mode
Multiple Simultaneous Event Activation for paging and
BGM distribution applications
Flexible Routing — each audio input can be
simultaneously routed to multiple outputs
Eight Level Ducker — assignable priority levels and mute
depth attenuates all other lower priority input signals
32 Programmable Events — activate via control input,
RS-232 or optional remote panels, models ZM-9001 and
ZM-9002
Input Priority Modes sets priority order when multiple
inputs with the same priority level are broadcast
First-In-First-Out (FIFO): input that occurs first is
broadcast
Last-In-First-Out (LIFO): most recent input is broadcast
MIX: all inputs are mixed and broadcast
Voice Operated (VOX) Event Activation with adjustable
threshold/sensitivity and gate release time
Additional Features
Mixer Out / Power Amp In Patching Loops (except
M-9000) for connection of external processor(s)
Software Utility for saving unit parameters to PC,
updating unit firmware, virtual control activation and
status indication
MS Excel Programming Templates — use Microsoft®Excel
for off-site programming
Keylock Security sets password-protected access to Input,
Output, Utility & Power functions
Input and Output Metering (D-001T module(s) required
for input metering)
Alphanumeric Channel and Memory Naming
Power Off Save Mode saves adjusted volume levels when
the power is switched off
Power On Memory sets the Event/Scene selected when
unit powers up
Detachable IEC-type AC Cable
UL and cUL Listed
Model Power Amplifier Output(s) Digital Signal Processor Mic/Line Inputs Line Outputs
A-9060S 1x 60 W @ 25/70V, 4/8 ohms 2 Channels Up to 8 (4x D-001T) Up to 7 (1 built-in
plus 3x T-001T)
A-9120S 1x 120 W @ 25/70V, 4/8 ohms 2 Channels Up to 8 (4x D-001T) Up to 7 (1 built-in
plus 3x T-001T)
A-9240SH 1x 240 W @ 70V 2 Channels Up to 8 (4x D-001T) Up to 7 (1 built-in
plus 3x T-001T)
A-9060DH 2x 60 W @ 70V 2 Channels Up to 8 (4x D-001T) Up to 6 (3x T-001T)
A-9120DH 2x 120 W @ 70V 2 Channels Up to 8 (4x D-001T) Up to 6 (3x T-001T)
A-9120DL 2x 120 W @ 4 ohms 2 Channels Up to 8 (4x D-001T) Up to 6 (3x T-001T)
M-9000 2x Line Level 2 Channels Up to 8 (4x D-001T) Up to 8 (2 built-in
plus 3x T-001T)
9000 Series Models

9000 SERIES MODULAR DIGITAL MATRIX
MIXER AND MIXER/AMPLIFIERS
Tel: [phone]
Fax: [phone]
www.toaelectronics.com
S PECIFICATIONS
Model No. A-9060DH A-9120DH A-9120DL A-9060S
Output Power 2 x 60W @ 70V 2 x 120W @ 70V 2 x 120W @ 4-16 ohms 1 x 60W @ 25/70V, 4/8 ohms
Audio Input Max. 8 channels, modular construction (modules optional)
Power amplifier input 1, 2: 0 dBV, 10k Ω, RCA pin jack
Audio Output Preamplifier output 1, 2: 0 dBV, 300 Ω, unbalanced, RCA pin jack Preamplifier output 1: 0 dBV,
300 Ω, unbalanced, RCA pin
jack; Preamplifier output 2:
0 dBV, 600 Ω, balanced,
removable terminal block (3 pins)
Speaker output 1, 2: 60 W, Speaker output 1, 2: 120 W, Speaker output 1, 2: 4-16 Ω, Removable terminal block
70.7 V line, 83 Ωx 2, BTL 70.7 V line, 41 Ωx 2, BTL unbalanced, removable term- (7 pins); Direct: 60W, 4 Ω,
output, removable terminal output, removable terminal inal block (4 pins), 120W x 2 unbalanced; Transformer:
block (4 pins) block (4 pins) (4 Ω load), 70W x 2 (8 Ω load), 60W, 8 Ω 25V and 70V,
40W x 2 (16 Ω load) balanced
Power Bandwidth 20 - 20,000 Hz, 0.008% THD 20 - 20,000 Hz, 0.02% THD Direct: 20 - 20,000 Hz,
0.02% THD; Transformer:
50 - 20,000 Hz, 0.5% THD
Frequency Response Power amplifier section: 20 - 20,000 Hz, +0, -1 dB
Analog input module to speaker output: 20 - 20,000 Hz +1, -3 dB
Total Harmonic Power amplifier section: 0.0008% (22 kHz LPF, 1 kHz, 0.0008% (8 Ω, 16 Ω rated power) 0.008% (22 kHz LPF, 1 kHz,
Distortion rated power) 0.002% (4 Ω rated power) rated power)
Analog input module to speaker output: 0.008% 0.008% (22 kHz LPF, 1 kHz, 0.008% (22 kHz LPF, 1 kHz,
(22 kHz LPF, 1 kHz, rated power) rated power) rated power)
S/N Ratio At Input short, 20 - 20,000 Hz, ALL FLAT or OFF setting
Output volume min.: 90 dB (preamplifier output)
Output volume max.: 61 dB (preamplifier output, input 1 volume: 0 dB, other inputs: OFF)
Power amplifier section: 110 dB
Crosstalk Over 64 dB at 20 kHz
Tone Control Bass: +/-12 dB (at 100 Hz), Treble: +/-12 dB (at 10 kHz)
Parametric EQ 10 bands, Freq: 20 ~ 20,000Hz, 31 steps, Various range: +/- 12 dB, Q: 0.3 - 5
Speaker Equalizer 15 (presets for TOA speakers)
High-pass Filter -12 dB/oct, Variable frequency range: 20 - 400 Hz, 14 steps
Low-pass Filter -12 dB/oct, Variable frequency range: 4,000 - 20,000 Hz, 8 steps
Compressor Depth: 1 - 5
Delay 0 - 40 ms (1 ms steps), maximum 40 ms (CH1 + CH2) (Mix mode only)
Scene/Event Memory 32
Operation Mode Matrix mode/Mix mode (selector switch)
Auxiliary Function Key lock function
Control Input/Output RS-232C, D-sub connector (9P, female)
Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3V DC, short-circuit current: under 1 mA,
removable terminal block
Control output: 4 outputs, open collector output, withstand voltage: 27V DC, control current: 50 mA, removable
terminal block
Remote volume: 2 channels, connect a 10k Ω/linear taper variable resister or 0 - 10 VDC, removable terminal block
Power Source 120 V AC, 60 Hz
Power Consumption 150 W 250 W 260 W 100 W
Operating Temperature 14˚ to 104˚ F (-10˚ to 40˚ C)
Operating Humidity 35% to 80% RH (no condensation)
Finish Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black paint
Dimensions (W x H x D) 16.54” x 4.24” (3.5” w/out feet) x 15.55” (420 x 107.6 x 395 mm) 16.54” x 4.24” (3.5” w/out
feet) x 13.98” (420 x 107.6
x 355 mm)
Weight (without modules) 19.84 lbs. (9 kg) 24.25 lbs. (11 kg) 24.25 lbs. (11 kg) 24.25 lbs. (11 kg)

9000 SERIES MODULAR DIGITAL MATRIX
MIXER AND MIXER/AMPLIFIERS
Tel: [phone]
Fax: [phone]
www.toaelectronics.com
S PECIFICATIONS
Model No. A-9120S A-9240SH M-9000
Output Power 1 x 120W @ 25/70 V, 4/8 ohms 1 x 240W @ 70 V n/a
Audio Input Max. 8 channels, modular construction (modules optional) Max. 8 channels, modular construction
Power amplifier input 1, 2: 0 dBV, 10k Ω, RCA pin jack (modules optional)
Audio Output Preamplifier output 1: 0 dBV, 300 Ω, unbalanced, RCA pin jack Preamplifier output 1, 2: 0 dBV, 600 Ω,
Preamplifier output 2: 0 dBV, 600 , balanced, removable terminal block (3 pins) balanced, removable terminal block (3 pins)
Speaker output: Removable terminal Speaker output: 240 W, 21 Ω, BTL
block (7 pins); Direct: 120W, 4 Ω, output, removable terminal block
unbalanced; Transformer: 120W, 8 Ω(4 pins)
25 V & 70 V, balanced
Power Bandwidth Direct: 20 - 20,000 Hz, 0.02% THD 20 - 20,000 Hz, 0.008% THD
Transformer: 50 - 20,000 Hz, 0.5% THD
Frequency Response Power amplifier section: 20 - 20,000 Hz, +0, -1 dB 20 - 20,000 Hz +1, -3 dB
Analog input module to speaker output: 20 - 20,000 Hz +1, -3 dB
Total Harmonic Power amplifier section: 0.008% Power amplifier section: 0.0008% 0.008% (22 kHz LPF, 1 kHz,
Distortion (22 kHz LPF, 1 kHz, rated power) (22 kHz LPF, 1 kHz, rated power) +10 dBV output)
Analog input module to speaker output: Analog input module to speaker output:
0.008% (22 kHz LPF, 1 kHz, rated power) 0.008% (22 kHz LPF, 1 kHz, rated power)
S/N Ratio At Input short, 20 - 20,000 Hz, ALL FLAT or OFF setting At Input short, 20 - 20,000 Hz, ALL FLAT
Output volume min.: 90 dB (preamplifier output) or OFF setting
Output volume max.: 61 dB (preamplifier output, input 1 volume: 0 dB, Output volume min.: 90 dB
other inputs: OFF) Output volume max.: 61 dB (input 1 vol.:
Power amplifier section: 110 dB 0 dB, other inputs: OFF)
Crosstalk Over 64 dB at 20 kHz
Tone Control Bass: +/-12 dB (at 100 Hz), Treble: +/-12 dB (at 10 kHz)
Parametric EQ 10 bands, Freq: 20 ~ 20,000Hz, 31 steps, Various range: +/- 12 dB, Q: 0.3 - 5
Speaker Equalizer 15 (presets for TOA speakers)
High-pass Filter -12 dB/oct, Variable frequency range: 20 - 400 Hz, 14 steps
Low-pass Filter -12 dB/oct, Variable frequency range: 4,000 - 20,000 Hz, 8 steps
Compressor Depth: 1 - 5
Delay 0 - 40 ms (1 ms steps), maximum 40 ms (CH1 + CH2) (Mix mode only)
Scene/Event Memory 32
Operation Mode Matrix mode/Mix mode (selector switch)
Auxiliary Function Key lock function
Control Input/Output RS-232C, D-sub connector (9P, female)
Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3 V DC, short-circuit current: under 1 mA,
removable terminal block
Control output: 4 outputs, open collector output, withstand voltage: 27 V DC, control current: 50 mA, removable
terminal block
Remote volume: 2 channels, connect a 10k Ω/linear taper variable resister or 0 - 10 VDC, removable terminal block
Power Source 120 V AC, 60 Hz
Power Consumption 150 W 250 W 40 W
Operating Temperature 14˚ to 104˚ F (-10˚ to 40˚ C)
Operating Humidity 35% to 80% RH (no condensation)
Finish Panel: Aluminum, hair-line, black; Case: Surface-treated steel plate, black paint
Dimensions (W x H x D) 16.54” x 4.24” (3.5” w/out feet) x 16.54” x 4.24” (3.5” w/out feet) x 16.54” x 4.24” (3.5” w/out feet) x 13.9”
13.98” (420 x 107.6 x 355 mm) 15.55” (420 x 107.6 x 395 mm) (420 x 107.6 x 353 mm)
Weight (without modules) 28.66 lbs. (13 kg) 24.25 lbs. (11 kg) 13.23 lbs. (6 kg)

9000 S ERIES M ODULES
9000 SERIES MODULAR DIGITAL MATRIX
MIXER AND MIXER/AMPLIFIERS
Tel: [phone]
Fax: [phone]
www.toaelectronics.com
MODULES
D-001T
Dual Mic/Line Input Module with DSP
Two Balanced Mic / Line Inputs
Digital Signal Processing
10-Band Parametric EQ
Bass / Treble
Loudness
High and Low Pass Filters
Compressor
Adjustable Sensitivity (nine levels, -60 to -10 dBV)
Phantom Power (24 VDC)
Removable Terminal Block
Maximum four per chassis
Required for VOX function and input metering
T-001T
Dual Line Output Expansion Module with DSP
Two Balanced Line Outputs
Digital Signal Processing
10-Band Parametric EQ
Bass / Treble
Loudness
High and Low Pass Filters
Compressor
TOA speaker EQ presets
Removable Terminal Block
Maximum three per chassis
AN-001T
Ambient Noise Controller Module
Automatically adjusts output gain to compen-
sate for changes in ambient noise level
Each input can be assigned to control a specific
output
Two inputs with +24VDC phantom power for
condenser mics
14 preset gain ratios
Accessory sensing microphone available, model AN-9001
Maximum two per chassis
SS-9001
Speaker Selector
Switch up to four speaker lines on one amplifier
output
Two amplifier inputs for Paging/BGM applications
Triggered by ZP-001T module control outputs
Wall-mount bracket included
Requires optional 24VDC power supply, model
AD-246
ZP-001T
Telephone Zone Paging Module
Telephone Paging to up to eight zones
Uses DTMF dialing to access amplifier
and/or line outputs
Dial up to eight output zones in one
operation
Analog extension or page port compatible
Page port operation requires contact closure activation
RJ-11 Telephone Jack and Removable Terminal Blocks
Maximum one per chassis
C-001T
Input/Output Control Module
Eight assignable control inputs for activating
Event, Volume Up/Down, Mute, Power On/Off,
Emergency Mute or Synch On/Off
Eight assignable control outputs for activating
external relays
Removable Terminal Block
Maximum one per chassis
AN-9001
Ambient Noise Sensing Microphone
Ceiling or wall-mount condenser
microphone
Fits one gang electrical box
Use with AN-001T module or DP-L2 processor
ZM-9001
Remote Panel
Six buttons to activate preset selection or
volume up/down
Wiring: shielded conductor to chassis Remote
Volume terminals
Max. loop resistance: 100 ohms (3000 ft. 22AWG)
Fits one gang electrical box
Maximum two ZM-9001/ZM-9002 per chassis
ZM-9002
Remote Panel
Four push buttons to activate preset selection or
volume up/down
Volume control knob
Wiring: shielded conductor to chassis Remote
Volume terminals
Max. loop resistance: 100 ohms (3000 ft. 22AWG)
Fits one gang electrical box
Maximum two ZM-9001/ZM-9002 per chassis
IMPORTANT NOTE ON MODULES: All existing 900 Series modules are
compatible with all 9000 Series module ports. Please see the new 9000
Series installation manual for details on installing modules. New 9000
modules are not compatible with module ports in 900 Series, 700 Series or
BG-M Series mixer/amplifiers.

Literature Order #: L-9000SERIES
Specifications subject to change without notice.
Revised 09/06 © 2006,TOA Electronics,Inc.
9000 S ERIES
M ODULAR
D IGITAL M ATRIX
M IXER AND M IXER /A MPLIFIERS
TOA E
LECTRONICS , I NC .
601 G
ATEWAY B LVD ., S UITE 300
S
OUTH S AN F RANCISCO , CA 94080
TEL: [phone]
FAX: [phone]
www.toaelectronics.com
Visit www.toaelectronics.com to download:
9000 Series Application Guide
Quick Start Guides
Specification Sheets
Architect and Engineering Specifications
MS Excel Programming Templates
Installation Manuals
CAD Files
High-resolution Images
For dimensions of other 9000
Series models,please refer to
the Specifications section.
For CAD files,please visit
www.toaelectronics.com.
A-9060DH/A-9120DH M-9000
D
IMENSIONAL D RAWINGS
B LOCK D IAGRAM (M IXER M ODE )
 Airports
 Audio / Visual
 Auditoriums / Theaters
 Automatic Microphone
Mixing
 Banks
 Bars / Lounges / Clubs
 Boardrooms
 Business Music
 Conference Facilities
 Educational Facilities
 Fitness Clubs / Gyms
 Hotels / Hospitality
 Houses of Worship
 Multi-Zone Paging
 Museums
 Music Distribution
 Offices
 Public Address
 Restaurants
 Retail Stores
 Room Combining
 Theme Parks
 Training Rooms
APPLICATIONS
Note: Matrix mode does not include input/output
delay or matrix cross-point gain control (on/off only).