Toa IB-9012 User manual

TOA Canada Corporation
INSTALLATION MANUAL
INTERFACE BOARD
1. GENERAL DESCRIPTION
The IB-9012 is designed to be mounted on the Q-SS9012 speaker selector for achieving the simple two-RJ45
port connection with the Q-RM9012 remote microphone. It is also equipped with a 3pin removable terminal for
sending out a line level audio signal to an external mixer/amplifier.
2. BASIC SPECIFICATIONS
2.1. IB-9012
2.1. Related Equipment
IB-9012
④
①②③
①RJ45 connector for connecting with the left RJ45 connector of the Q-RM9012.
②RJ45 connector for connecting with the right RJ45 connector of the Q-RM9012.
③3pin removable terminal for connecting with the audio input of an external mixer/amplifier.
④Two 12pins for connecting with the removal terminals supplied with Q-SS9012.
Q-RM9012 Remote Microphone Q-SS9012 Speaker Selector

TOA Canada Corporation
3. INSTALLATION PROCEDURE
Step1. Loosen the terminal screws of the 12pin removable terminal supplied with the Q-SS9012
and attach it onto the lower pins of the IB-9012. Fix the screws with a mini flat head
screwdriver.
Step2. Attach another 12pin removable terminal onto the upper pins of the IB-9012.
Step3. Insert the IB-9012 into the corresponding terminal blocks on the Q-SS9012.
Step4. Connect 2 CAT5 cables from the Q-RM9012 to the RJ45 connectors of the IB-9012.
Step5. Wiring the supplied 3pin removable terminal plug, and insert it to the terminal block on the
IB-9012. Another end of this wire connects to the audio line level input of an external
mixer/amplifier for sending the audio signal from the Q-RM9012.
(Left to upper, Right to lower connector)
H C E