Toa DI-1616 User manual

FEATURES
qControl/monitoring of TOA IP Series amplifier
channel's input/output levels, mute, power supply and
protect mode status.
qSupports up to 16 TOA IP Series amplifier channels
(8 IP Series amplifiers) per unit.
qAllows large system configurations of up to 30 DI-
1616’s via RS-485 to control and monitor up to 480 IP
Series amplifier channels (240 IP Series power
amplifiers).
qCompatible with other DACsys II models for systems
with any combination of up to thirty DACsys II units
including the DI-1616, DP-0202, DP-0204/SR, or
DX-0808.
qConnects to PC with standard RS-232C or RS-485
serial link.
qStores amplifier channel settings in 16 on-board
memories with instant recall from the front panel or
PC.
qRequires CX-9CC-2 (6.6ft/2m) or CX-9CC-5
(16.4ft/5m) interface cable for each IP amplifier chan-
nel (order separately).
qIncludes dedicated DACsys II Windows 95TM control
software and rack-mount brackets.
qOccupies one rack space and weighs 8.82 lbs. (4kg).
DI-1616 Amplifier Controller/Monitor
DESCRIPTION
The DI-1616 Amplifier Controller/Monitor is TOA's latest
addition to the DACsys II Series and enables control and
monitoring of TOA IP Series Dual Channel Amplifiers using
a standard Windows 95TM based PC. With the DI-1616, you
can control/monitor each IP amplifier channel's input/output
levels, mute, power supply and protect mode status. A sin-
gle DI-1616 supports up to 16 IP Series amplifier channels
(8 IP Series power amplifiers) and communicates with the
PC via RS-232C or RS-485. For large systems, you can
connect up to 30 DI-1616's via RS-485 to control and mon-
itor 480 IP Series amplifier channels (240 IP Series power
amplifiers). Or, configure systems with any combination of
up to 30 DACsys II units including the DI-1616, DP-0202,
DP-0204/SR, or DX-0808. The DI-1616 has 16 on-board
memories to store amplifier channel settings with instant
recall from the unit front panel or PC. Each IP Series ampli-
fier channel connects to the DI-1616 with the CX-9CC-2
(6.6ft/2m) or CX-9CC-5 (16.4ft/5m) interface cable (order
separately). The DI-1616 occupies one rack space and
includes rack-mount brackets and the DACsys II Windows
95TM control software.
DI-1616
AMPLIFIER CONTROLLER/MONITOR

SPECIFICATIONS**
Model Number DI-1616
Power Requirements AC100-240 V, 50/60 Hz, 15 W
Frequency Response 20Hz to 20kHz (+0dB, -2.0dB)
Total Harmonic Distortion Less than 0.07% (1kHz, +4dBu*)
Control/Monitoring 16 Channels (8 IP Series power amplifiers)
Level Control 8-pin Mini-DIN Connector
Input: 16 channels, +4dBu* nominal, 10kΩunbal.
Output:16 channels, +4dBu*nominal, 2kΩunbal.
Level setting: 0 to -∞dB changeable in 1dB steps
(muting: -∞dB)
Monitoring Power supply status, protection, input level,
output level, mute status
Memory 16 on-board memories
Interface Standard Single unit control: RS-232C, 9-pin D-sub
Multiple units control: RS-485, XLR-3-31/32
Memory/Unit No. Display Double-digit LED
Master Display Green LED
PC Software Windows 95TM TOA DACsys II version 2.0
or higher
Dimensions 1.73" (43.2mm) H x 19" (482mm) W x 11.27"
(284.5 mm) D
Weight 8.82 lbs. (4kg)
Finish Panel: Black paint
Case: Color steel plate, black
*0dBu=0.775V RMS
**Specifications subject to change without notice
APPEARANCE AND DIMENSIONAL DIAGRAM
Printed in U.S.A. 3/98 bofors