Toa HY-S60WAS User manual

INST
INSTINST
INSTALLA
ALLAALLA
ALLATION
TION TION
TION MANUAL
MANUAL MANUAL
MANUAL
SPEAKER
SPEAKERSPEAKER
SPEAKER BRACKET
BRACKET BRACKET
BRACKET HY
HYHY
HY-
--
-S60
S60S60
S60W
WW
W AS
ASAS
AS
The HY-S60W AS stackin bracket is desi ned to exclusively stackin slim array speaker, it is allow 2 pieces
of TZ-S60W AS to be stack in order to reach wider sound directivity. The bracket is desi ned for indoor use.
1.
1.1.
1. SAFETY PRECAUTIONS
SAFETY PRECAUTIONSSAFETY PRECAUTIONS
SAFETY PRECAUTIONS
● Prior to installation or use of the speaker bracket, please read carefully the instruction manuals.
● You must thorou hly understand the safety precautions and important safety warnin s stated in the
Installation manual.
• After readin , please keep the instruction manual for future use at any time.
Installin the speaker unit with
Installin the speaker unit with Installin the speaker unit with
Installin the speaker unit with speaker
speakerspeaker
speaker brackets
bracketsbrackets
brackets
•Mount the unit on a location stron enou h to
support the wei ht of the unit and speaker
bracket. Doin otherwise may cause the speaker
unit to fall and result in personal injury /
equipment dama e.
•Do not apply other methods to mount the
speaker bracket other than the method
specified in the installation manual. speaker
unit may fall and cause personal injury.
•Use the screw compatible with the composition
and structure of the wall. Doin otherwise may
cause the speaker to fall and result in personal
injury.
•Ti hten each screw securely. Ensure no loose
bolt after speaker unit is mounted to prevent it
from fallin and causin personal injury.
•Do not mount on a location exposed to constant
vibration because it may dismount or drop the
speaker.
•The product is desi ned for in-door use therefore
do not use it outdoors. Doin otherwise may
brin dama e to the speaker or cause it to fall,
resultin in personal injury.
•Do not installin or placin the unit on locations
that are not stable, like on fra ile table or on
slanted surface. Doin otherwise may cause the
speaker unit to fall and result in personal injury.
•Do not apply anti-rust lubricant as it will dama e
the wood when applied and cause the speaker
unit to fall, result in personal injury.
Indicates a dangerous situation, improper action may result in
death or serious injury.
WARNING
WARNINGWARNING
WARNING
CAUTION
CAUTIONCAUTION
CAUTION
WARNING
WARNINGWARNING
WARNING
Indicates potential danger, improper action may result in minor
injury or equipment damage.

When mountin Speaker
When mountin Speaker When mountin Speaker
When mountin Speaker Bracket
BracketBracket
Bracket
•When installation the speaker bracket required 2 or more people to handle it, If the unit fall and result in
personal injury.
•Avoid the sharp ed e of the unit to prevent any injury.
•Conduct re ular check to detect any dama e to the unit or corrosion to the speaker bracket as early as
possible. Failure to do so may cause the speaker to fall, result in personal injury.
2
22
2 .
. .
. PRECAUTIONS BEFORE INSTALLATION
PRECAUTIONS BEFORE INSTALLATIONPRECAUTIONS BEFORE INSTALLATION
PRECAUTIONS BEFORE INSTALLATION
Adverse effects of weather allows the speakers bracket to be dama ed, if ne lected can cause the speaker to
fall and result in personal injury.
3.
3.3.
3. SPEAKER BRACKET
SPEAKER BRACKETSPEAKER BRACKET
SPEAKER BRACKET
3.1.
3.1. 3.1.
3.1. Rear
RearRear
Rear Stack Bracket
Stack BracketStack Bracket
Stack Bracket
3.2. Side Stack Bracket
3.2. Side Stack Bracket3.2. Side Stack Bracket
3.2. Side Stack Bracket
4. INSTALLATION
4. INSTALLATION4. INSTALLATION
4. INSTALLATION
When stackin 2 pieces of speakers, join the bottom side of each speaker.
Step 1.
Step 1.Step 1.
Step 1. join the bottom side of each speaker, by placin the speakers on the floor (refer to below
illustration).
Step 2
Step 2Step 2
Step 2. Connect the speaker cable to input terminal of the two speakers, where the cable must pass throu h
the hole in the wall bracket so that the cable do not obstruct the speaker from coincidin with the
wall, and match the impedance to be used (Low impedance or Hi h impedance)
“
“ “
“
Do not connect low impedance to hi h impedance, because it can cause dama e to speakers or
Do not connect low impedance to hi h impedance, because it can cause dama e to speakers or Do not connect low impedance to hi h impedance, because it can cause dama e to speakers or
Do not connect low impedance to hi h impedance, because it can cause dama e to speakers or
amplifiers that are
amplifiers that are amplifiers that are
amplifiers that are used
usedused
used ”.
”.”.
”.
Step 3.
Step 3.Step 3.
Step 3. Install rear stack bracket usin the screws provided (BH Screw M5X15 SUS 3-SEMS).
CAUTION
CAUTIONCAUTION
CAUTION

Step
Step Step
Step
1
11
1
Step 4
Step 4Step 4
Step 4
Step
Step Step
Step
2
22
2
Step
Step Step
Step
3
33
3
Illustration of stackin TZ
Illustration of stackin TZIllustration of stackin TZ
Illustration of stackin TZ
-
--
-
S60W AS wall mountin
S60W AS wall mountinS60W AS wall mountin
S60W AS wall mountin
Step 4.
Step 4.Step 4.
Step 4. Release the 4 pieces of screws on the ri ht and left side of the speakers,and use the screws for
installin the side stack brackets on the ri ht and left side.
Step 5.
Step 5.Step 5.
Step 5. Install 4 pieces of screws, two screws should be paralleled above the other 2 screws. The width
distance between the 2 screws is 60mm, hei ht distance is approximately 1345mm between the two
screws above and below, and the depth distance of each screw is more than 11mm from the wall
surface. (refer to below illustration).
“ When
“ When “ When
“ When speakers are
speakers are speakers are
speakers are stack
stackstack
stacked,
ed,ed,
ed, direction
direction direction
direction is
is is
is not adjustable
not adjustablenot adjustable
not adjustable ”
””
”
Side Stack Bracket
Rear Stack Bracket
BH Screw M5X15
SUS 3-SEMS
BH-Screw M5X30 Fe NI 3-SEMS

Finish SPCC, white, semi- loss, paint
Maximum Speaker Load
17 k (37.38 lb)
Rear Stack Bracket 0.55 k (1.21 lb)
Side Stack Bracket 0.246 k (0.54 lb)
Aplicable Speaker (option) TZ-S60W AS
Wei ht
5.
5.5.
5. SPESIFI
SPESIFISPESIFI
SPESIFICATION
CATIONCATION
CATION
Note
NoteNote
Note : The desi n and specifications are subject to chan e without notice for improvement.
TOA Corporation
TOA CorporationTOA Corporation
TOA Corporation
Printed in Indonesia
533-06-253-70