ToAuto FT-80W User manual

2
FT-80W User Manual
1
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
power button
Nixie tube display
Indicate light for temperature unit
Soldering wire holder
Temperature adjustable
knob button Tip cleaner location
Item No. Voltage Power Temperature
Adjustable
unit Display method
Temperature
Temperature
FT-80W 110/240V AC 80W
Knob
80°C~480°C
Nixie tube
°C/°F
2℃
±
±15℃
1. power button
Turn on after this device given by power. Set the temperature you want will be shown
on the nixie tube display by knob. It will show the real temperature value of the
soldering tip after 3 seconds.
2. Temperature Setting
When this device is working, it can adjust temperature rapidly by temperature knob,
the setting temperature will be shown when adjusting temperature, the real
temperature of soldering tip will be displayed after stopped adjusting temperature
for 3 seconds. Temperature range is 80~480℃.
setting
temperature
actual-measured
temperature
Up to be setting
temperature
34
The design of this product(including internal software) and its accessories is under
the protection of relevant state laws.Any violation of the relevant rights of our
company will be subject to legal sanctions.Users shall consciously abide by the
relevant state laws when using this products.
Copyright information
We will take no responsibility for any personal injury or property damage
caused by reasons other than the product quality problem,which may include
force majeure (natural disasters,etc) or personal behavior during the
operation of this product.This manual is organized ,compiled and released
by SHENZHEN FAST TO BUY COMMERCE CO.,LTD. according to the latest product
features. We will not responsible for further notice of the subsequent
improvement of the product and this manual.
Disclaimer
The soldering iron needs to be tested before it leaves the factory,
so the soldering tip may cover a small amount of tin, and the
casing will be slightly yellowing, which is a normal phenomenon.
Soldering Station
Users are required to have basic knowledge of common sense and electrical
operations before using the product. Minors shall use the product under the
guidance of a professional or guardian.
3.Essential knowledge for users
Packing list
To avoid electric shock or injury to the human body or fire hazard,the follwing basic rules
must be observed when using the equipment.In order to ensure personal safety,only parts
and accessories approved or recommended by the original factory canbe used, otherwise
serious consequences may occur!
Misuse of this product may lead to serious injury to the user or material
damage to the object involved.
Caution
Essential knowledge for users
Safety precautions
WARNING
So Users shall strictly observe the following rules:
Keep this product away from flammable materials.
Keep the product out of children’s reach.
Do not use this product if you are inexperienced or have no sufficient necessary
knowledge without the guidance of related personnel.
Do not use this product under wet environment or with wet hands to avoid electric
shock.
Do not modify this product and its accessories without authorization.
Please turn off the power when replacing parts and iron tips, and not resume the use
until the equipment is completely cooled down.
Please use the accessories from the original factory when replacing the product parts.
Make sure to turn off the power switch when the equipment is temporarily stopped or
out of use.
· The handle structure is ergonomically designed for comfortable grip.
· The heating wire and sensor are made of PTC material, which is quick in
temperature rise and precise in temperature control.
· Auto-standby, auto-shut down is available.
· Using 3 cored power cable.
Features
· This product designed with nixie tube display.
· MCU controlled temperature calibration with PID system equipped, adjust
temperature by knob button, easy to operate.
· Combined soldering station with soldering stand.
Main unit (including machine, power cable and handle)x1pc
Soldering tips x 5pcs
Soldering wire holder x 1pc
User manual x 1pc
Tin suction x 1PCS
50g lead-free wire x 1PCS
Elbow tweezers x 1PCS
Specification
Appearance and control panel Operational guide
Temperature unit switch
/ temperature lock
Soldering handle
Soldering stand
Soldering tip slot
Temperature
methodstability
range accuracy

78
6
5
5. Auto Standby Function
6.Auto Sleep Function
3. Temperature Locking Function
Press LOOK/℃/℉ button for 3 seconds at the same time under working mode, the
current temperature will be locked, the temperature won't be changed by turning
the knob button, and display LOC for locking temperature. Can unlock the current
temperature by pressing LOOK/℃/℉ button for 3 seconds again when temperature
locking.
4. Switching Temperature Unit
The current temperature unit will be switched by pressing LOOK/℃/℉ button at
the same time under working mode, the indicate light of temperature unit will
be changed accordingly .
Turn the knob
button
896
7. Warning
E02 shown on the display screen means there is error for sensor.
Web: www.fasttobuy.com
Tel: [phone] Fax: [phone]
Facebook: https://www.facebook.com/servicefasttobuy
E-mail: [email protected]
Soldering tips
In case of a product fault, please send the faulty product to the designated
maintenance shop for maintenance, and those service center and personnel
unauthorized by the factory are prohibited from carrying out any maintenance
on the product.
This product is guaranteed for two years from the date of purchase(excluding
consumables such as the heating core).Ifany quality problem is found within the
guarantee period, we will response for the maintenance free of charge.
For those product beyond the warranty period, we provide life-long maintenance
services.
For those product damaged due to users’improper application and unauthoried
changes to the product parts, ourcompany only provides limited warranty service.
Product warranty
When the soldering not in use and put the soldering iron on the iron holder, it will auto
standby after 10 minutes, heater is heating up to 200 ℃, nixie tube display STB，pick up
the soldering iron and back to normal working mode.
In auto standby mode, the soldering station will auto sleep after 20 minutes, nixie tube
display SLP , the heaing core is not heated , it will get back to normal work mode by
adjusting the knob or pressing the button.(P.S. It will auto sleep when not in use
machine doesn't operate and turn to sleep mode)
Add: #5037, 5F, Shenzhou Chengyun Building, No.2 Beier Road ,
Bantian Subdistrict, Longgang District, Shenzhen City, 518000,
China.
Fast To Buy Limited
After-sales service department Tel：[phone]