Atten ATETOOL AT-689A User manual

2
AT-689A User Manual
1
1
2
3
4
5
6
7
8
9
power button
LED segment display
Soldering wire holder
Temperature adjustable
knob button
Tip cleaner location
Item No. Voltage Power Temperature
range
Adjustable
method Temperature
unit Display method
Temperature
stability
AT-689A 120/230V AC 68W
Knob
80°C~480°C
LED segment
° °C/ F
2℃
±
1. power button
Turn the power on, adjust to the needed temperature by turning knob, the LED segment
will display the real temperature value of the soldering tip after 3 seconds.
2. Temperature Setting
When this product is on power, its temperature can be adjusted easily by turning the knob.
The setting temperature value will be display when turning the knob, the real temperature
of soldering tip will be displayed 3 seconds after done turning.
Temperature range is 80~480℃.
480
350
480
Set the
temperature
Actual-measured
temperature value
It heats up to the setting
temperature
34
The design of this product(including internal software) and its accessories is under
the protection of relevant state laws. Any violation of the relevant rights of our
company will be subjected to legal sanctions. Users shall consciously abide by the
relevant state laws when using this products.
Copyright information
We will take no responsibility for any personal injury or property damage
caused by reasons other than the product quality problem, which may include
force majeure (natural disasters, etc) or personal misuse or negligence during the
operation of this product. This user manual is organized, compiled and released
by according to the
latest product features. We will not be responsible for further notice of the
subsequent improvement of the product and this manual.
Disclaimer
The soldering iron needs to be tested before it leaves the factory,
so the soldering tip may cover a small amount of tin, and the
casing will be slightly yellowing, which is a normal phenomenon.
Soldering Station
Users are required to have basic knowledge and common sense for electrical
operations before using the prod uct. Minors shall use the product under the
guidance of a professional or guardian.
3.Essential knowledge for users
Packing list
To avoid electric shock or injury to the human body or fire hazard, the follwing basic rules
must be observed when using the equipment. In order to ensure personal safety, only parts
and accessories approved or recommended by the original factory can be used, otherwise
serious consequences may occur!
Misuse of this product may lead to serious injury to the user or material
damage to the objects involved.
Caution
Essential knowledge for users
Safety precautions
WARNING
When this product is in used, the soldering iron tip with temperature up to 80-480℃
may cause burns to the user or cause a fire due to improper use. So users shall strictly
observe the following rules:
Keep this product away from inflammable substance.
Keep the product out of children’s reach.
Do not use this product if you are inexperienced or have no sufficient necessary
knowledge without the guidance of related professionals.
Do not use this product under wet environment or with wet hands in case of electric
shock.
Do not modify this product or its accessories without authorization.
Please turn off the power before replacing parts, do not touch the soldering iron tip
until it completely cools down.
Please use accessories from original factory when replacing the product parts.
Make sure to turn off the power switch after using.
·The handle structure is ergonomically designed for comfortable grip
·The heating wire and sensor are made of PTC material, which is quick in
temperature rise and precise in temperature control
·Auto-standby, auto-shut down is available
·Using 3 cored power cable
Features
· This product designed with LED segment display
·MCU controlled temperature calibration with PID system equipped, adjust
temperature by knob button, easy to operate
·Combined soldering station with soldering iron holder
Main unit (including machine, power cable and handle)x1pc
Soldering wire holder x 1pc
User manual x 1pc
Specification
Appearance and control panel Operational guide
Temperature unit switch
/ temperature lock
Soldering handle
Soldering iron holder
Soldering tip slot
1
2
3
4
5
6
7
8
9
Shenzhen ATTEN Technology Co., Ltd. Electronic Tools Branch

78
6
5
5. Auto Standby Function
6. Auto Sleep Function
3. Temperature Locking Function
Press LOCK|℃/℉ button for 3 seconds and let go, now the setting temperature is locked.
Now turning the knob will not change the temperature, the LED segment will display LOC to
indicate that the temperature is locked.
Press LOCK|℃/℉ button again for 3 seconds to unlock the temperature.
4. Switching Temperature Unit
The current temperature unit will be switched by pressing LOCK|℃/℉ button,
480
Turn the knob
slp
7. Warning
E02 shown on the display screen means there is error for sensor.
e02
CBN033794
Soldering tips
In case of a product fault, please send the faulty product to the designated
maintenance shop for maintenance, and those service center and personnel
unauthorized by the factory are prohibited from carrying out any maintenance
on the product
This product is guaranteed for one years from the date of purchase(excluding
consumables such as the heater, etc.)If any quality problem is found within the
guarantee period, we will response for the maintenance free of charge
For those product beyond the warranty period, we provide life-long maintenance
services
For those product damaged due to users’improper application and unauthorized
changes to the product parts, our company only provides limited warranty service
Product warranty
When the soldering not in use and put the soldering iron on the iron holder, it will auto
standby after 10 minutes, temperature drop to 200 ℃, LED segment displays STB.
Picking up the handle, pressing the button or turning the knob, will wake up the soldering
station and get it back to normal working mode.
In auto standby mode, the soldering station auto sleeps after not in used for further 20 minutes.
In sleep mode, it displays SLP, the heater stops heating.
Adjusting the knob or pressing the button will not wake up the soldering station. Turn the
power off then turn on to restart the soldering station.
.
- f -
- c -
Shenzhen ATTEN Technology Co., Ltd. Electronic Tools Branch
Address：F5, 1-2 #, Tongfuyu, Aiqun Road, Shiyan Street, Bao'an District, Shenzhen,
518132,P.R.China
Tel： [phone] - 802
support：[phone] - 818
URL： www.atten.com.cn( in Chinese )
www.atten.com(in English)
the LED segment will display the temperature value accordingly.