Birlea 135CM HOUSTON BED User manual

135CM HOUSTON BED
IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR 135CM HOUSTON BED .
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber inside the accessories pack.
HEALTH & SAFETY:
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push this product as this will cause damage.
Always lift this product with two people to repositions.
Keep any sharp objects away from this product.
ASSEMBLY INSTRUCTIONS
www.birlea.com Page of 4
Vendor: S000350
1

2
Page of 4
Vendor: S000350
Parts List Hardware List ( BOX 2 )
Part Descripion Qty Part Description Qty
** You will need a screwdriver for
assembly.
01 1
Headboard panel
02
03
04
05
06
07
Footboard panel
Center rail
Support legs
1
1
1
1
1 Set
2
Bed side rail ( Left )
Bed side rail ( Right )
Bed slat
JCBC Screw M6 x 60mm
JRN Nut
B
C
D
E
F
G
H
M6 x 50mm CSK Cap Wood screw
M3.5 x 16mm C.B Screw
8
8
1
4
16
2
Allen key M4
2
M4 x 38mm C.B Screw 9
A
Bracket L
Bracket U
01
02
04
03
07
05
06
06
Step 1: Prepare these parts for assembly using hardware parts D, G and H.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
01
02
H
H
D
D
H
05
G
G
05 G
D
Box
1
1
2
2
2
2
2
D x 14
G x 2
H x 2

3
Page of 4
Vendor: S000350
Step 2: Fix bed side rail (3) and (4) to headboard panel (1) and footboard panel (2) using hardware part
A, B and C.
Please note that do not fully tighten the hardware A before assembling the center rail (5).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Attach center rail (5) to support legs (6) using hardware C and F.
Please note that support legs (6) has a plastic adjuster at the bottom to unscrew and adjust the height of
center rail (5) if necessary.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
01
02
03
04
B
A
C
02
05
06
06
06
Plastic adjuster
05
C
F
C
A x 8
B x 8
F x 4
C

4
Page of 4
Vendor: S000350
Step 4: Insert hardware G on the center rail (5) into hardware H on the headboard panel (1) and
footboard panel (2) using hardware D with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5: Attach bed slat (7) to bed side rail (3), (4) and center rail (5) using hardware E with a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Additional Information:
· For complete product information, images and dimension diagrams please visit the website
www.birlea.com
· If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
· Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
02
01
04
03
G
H
05
H
G
05
05
06
06
02
03
04
01
07 E
D
D x 2
E x 9