Kozyard KZT194BR User manual

Patio Dining Square Table
Assembly Manual
• Prior to assembly, ensure that you lay out and identify all
the parts listed in the parts list.
• Tighten all nuts and bolts securely. Hand-tighten all bolts
before use. Avoid using power tools or applying excessive
force during assembly and bolt tightening.
• If you encounter any difficulties during assembly or if any
part is missing or damaged, please don't hesitate to
contact our customer service team via email at
[e-mail] or by calling our toll-free number at
866-355-0018.
• The weight capacity of this table is 110 lbs.
• Clean the frame components with a mild soap solution,
then rinse thoroughly. Avoid using bleach, acid, or any
other solvents on either the fabric or frame components.
• For a comprehensive warranty policy, please visit
www.kozyard.com. Be aware that warranty terms can
change without prior notification.
• For the best performance and safety of your table, inspect
and tighten all bolts and fasteners regularly
Assembly Instructions
Care and warranty
Kozyard LLC Products
www.kozyard.com
Copyright 2016 - 2023 Kozyard LLC. | All Rights Reserved.
Version:20231006

M6X15
M6X28
To p
Leg
Leg Connector
Screws
Screws
Washer
Allen key
1
4
1
8
8
16
1
F
G
A
B
C
D
E
Description Qty
Part
D
A
B
F
Part list
1. Connect the top (Part A) and legs (Part B) using Screws (D)
and Washers (F) as illustrated in the diagram.
Reminder: All parts must be put on
the carpet in the assembly.

E
F
C
2. Connect the leg connector (Part C) with the legs (Part B)
using screws (E) and washer (F) as indicated in the diagram.
3. Finally, ensure that all screws are securely tightened
before using the product on level ground.

866-355-0018
© Copyright 2016 - 2023 Kozyard LLC. | All Rights Reserved.
Kozyard LLC