Royalcraft Modena Wentworth Seychelles User manual

Product size:
L 1 00*W1 00*H50/68cm
The intended use of this product is for domestic use only.
Important, please retain for future reference.
Read carefully.
www.royalcraft.co.uk

©A Mir Co., Ltd. 1 / 6

Produced in China for A. Mir & Co. Ltd.
© A. Mir & Co. Ltd. 2 / 6
www.royalcraft.co.uk
Before you start
Wentworth Adjustable Table 100 x 100cm
Assembly Instructions
Warnings
Dos
Don’ts
Two people
Time to assemble
50 Minutes
Tools required
Tips:
It is best not to fully tighten the nuts and
bolts until they are all correctly located.
Only carefully tighten them when you are
satisfied with the alignment of all
components.
Be careful not to overtighten.
IMPORTANT, RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
See enclosed instructions for assembly, safety and care
information.
Failure to follow the warnings could result in serious injury.
Handle heavy parts with care.
Ensure that this product is fully assembled as illustrated before use.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Do not stand or climb onto this product.
This product is intended for domestic use only.
Ensure the table is always placed on level ground.
Furniture can be dangerous if incorrectly used. No liability will be
accepted for damage or injury caused by incorrect use of this
product.
Do not use scourers, abrasives, washing powders, chemical
cleaners or any other substances containing abrasives since
these substances can damage the product, including the glass
panel.
Do not place very hot or very cold items on the glass surface
unless adequately thick table-mats are used to prevent such
items from coming into contact with the glass.
Do not use the glass as a chopping surface. Do not strike glass
with hard or pointed items.
Do not strike the glass with hard or pointed items.
Do not use power tools to construct this product.
Do not use this product if parts are missing, damaged or worn.
Do not sit or lean on this product.
Do not stand or climb onto the product and do not use it as a
ladder, as this could lead to it unbalancing and overturning.
Never drag furniture when moving it, always lift it.
Number of people required for assembly
When you are ready to start, make sure that you have the right
tools, plenty of space and a clean, dry area for assembly.
Unwrap all packaging materials and place the components on
suitable surface to prevent scratching your product.
Check the pack and make sure you have all of the parts listed. In
the event of problems or missing parts, please contact the seller.
Check all screws and bolts are tightened and inspect regularly.
This product is suitable for all year outdoor use, but we recommend
that a furniture cover be used to add additional protection to your
product when not in use.
During server weather conditions, including high winds, rain, hail,
thunderstorms, extreme heat and cold temperatures, the product
should be stored inside in a cool, dry place.
During prolonged sunny spells, we recommend that furniture should
be covered over with a protective furniture cover and/or stored
inside when not in use. This will help prevent harmful UV rays from
damaging and discolouring the material.
To best preserve the material (synthetic rattan) we recommend the
use of a UV protector spray like Fabsil. This will block the harmful
UV rays from damaging the material.
Before storage, ensure that the product is clean and dry.
To clean, wipe down with a sponge and warm soapy water and
wipe with a clean, dry cloth.
When cleaning glass panels use a damp cloth or leather with
washing up liquid or soft soap if necessary; do not use washing
powders or any other substances containing abrasives since these
substances scratch glass.

Produced in China for A. Mir & Co. Ltd.
© A. Mir & Co. Ltd. 3 / 6
www.royalcraft.co.uk
Components, fixtures & fittings (not actual size)
Parts List
Part
No. Diagram Qty. Part No. Diagram Qty.
A
Table Top Frame
1 PC B
Small Base
4 PCS
C
Big Base
1 PC D
Glass Top
1 PC
W20
M6*20mm Bolt
4 PCS F3
Washer
4 PCS
F2
Bolt Head Cap
4 PCS S1
Spanner
1 PC
Wentworth Adjustable Table 100 x 100cm
Assembly Instructions

Produced in China for A. Mir & Co. Ltd.
© A. Mir & Co. Ltd. 4 / 6
www.royalcraft.co.uk
Step by step assembly instructions
All Bolt Head Caps should not be attached before finally tightening all Bolts with Spanner.
Step One
Place the Glass Top (D) on a soft,
level surface.
With the help of another person,
place Table Top Frame (A) upside down
onto a flat, non-abrasive surface to
avoid scratching the surface or rim.
Step Two
Assemble the Small Base (B) onto
the Table Top Frame (A) using
Washers (F3), Bolts (W20) and
Bolt Head Covers (F2).
Before attaching the Bolt Head Covers,
tighten all bolts with Spanner (S1).
Wentworth Adjustable Table 100 x 100cm
Assembly Instructions

Produced in China for A. Mir & Co. Ltd.
© A. Mir & Co. Ltd. 5 / 6
www.royalcraft.co.uk
Step Three
With the help of another person,
carefully lift Glass Top (D) and
place it onto the Table Top Frame (A).
Step Four
To use Dining Table function, insert the Small Base into the upper Slots on the Big Base (C).
Your Dinging Table is ready for use!
Upper Slots to hold the
Small Base.
Wentworth Adjustable Table 100 x 100cm
Assembly Instructions

Produced in China for A. Mir & Co. Ltd.
© A. Mir & Co. Ltd. 6 / 6
www.royalcraft.co.uk
Step Five
To use in the Coffee Table function, take off the table top and turn 90 degrees, then replace
the Small Base into the Bottom Slots on the Big Base (C).
This table should be operated by adults.
Children should be kept away during the table function change process between
Dining Table and Coffee Table function.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Bottom Slots to hold the
Small Base.
Wentworth Adjustable Table 100 x 100cm
Assembly Instructions