Topfield TF 6000 PVRt User manual

TOPFIELD
TF 6000 PVRt
User Guide
Digital Terrestrial Receiver
Personal Video Recorder

Contents iii
Contents
1 Introduction 1
1.1 Features ............................... 1
1.2 Controlling the digital receiver .................. 2
1.2.1 The front panel ....................... 3
1.2.2 The remote control ..................... 4
2 Setup 7
2.1 Unpacking .............................. 7
2.2 Safety precautions ......................... 8
2.3 Rear panel connections ....................... 9
2.4 Connecting up your digital receiver ............... 11
2.4.1 Connecting the antenna .................. 11
2.4.2 Connecting to your television .............. 12
2.4.3 Connecting to your video cassette recorder ....... 14
2.5 Switching on for the first time ................... 15
2.5.1 Inserting batteries in the remote control ......... 15
2.5.2 Powering on and checking picture ............ 15

iv Contents
3 Preference Settings 17
3.1 Language settings .......................... 17
3.2 Video and audio settings ...................... 19
3.2.1 Television standard .................... 19
3.2.2 Colour model ........................ 19
3.2.3 Video cassette recorder .................. 20
3.2.4 Television aspect ratio ................... 20
3.2.5 Sound mode ........................ 21
3.3 Local time setting .......................... 21
3.4 Parental control ........................... 22
3.5 Adjusting the on-screen display .................. 25
3.6 To turn on the time shift feature .................. 26
4 Service Search 27
4.1 Searching broadcasting services .................. 27
4.2 Resetting to factory settings .................... 28
5 Daily Usage 29
5.1 Volume control ........................... 29
5.2 Watching television ......................... 29
5.2.1 The services list ....................... 29
5.2.2 The favourite services list ................. 31
5.2.3 Viewing programme information ............ 32
5.2.4 Selecting audio tracks ................... 33
5.2.5 Selecting subtitle tracks .................. 33
5.2.6 Viewing teletext ...................... 33
5.3 Viewing electronic programme guide .............. 34
5.4 Watching multifeed programme ................. 35
5.5 Using time shift ........................... 35
5.6 Using picture in picture ...................... 37

Contents v
6 Listing Services 39
6.1 Editing the favourite list ...................... 39
6.2 How to use on-screen keyboard .................. 41
6.3 Transferring receiver data ..................... 41
7 Recording and Playing 43
7.1 Recording a programme ...................... 44
7.1.1 Instant recording ...................... 44
7.1.2 Timer recording ...................... 46
7.1.3 Scheduling a recording using the programme guide . 49
7.1.4 Recording a time-shifted programme .......... 49
7.2 File archive ............................. 50
7.2.1 To delete a recording .................... 51
7.2.2 To sort recordings ..................... 51
7.2.3 To lock a recording ..................... 51
7.2.4 To rename a recording ................... 52
7.2.5 To make a new folder ................... 52
7.2.6 To move a recording to another folder .......... 52
7.3 Playing back a recording ...................... 52
7.3.1 To navigate using the progress bar ............ 53
7.3.2 To play in slow motion .................. 54
7.3.3 To play in fast motion ................... 54
7.3.4 To make a bookmark .................... 54
7.3.5 To play back a recording repeatedly ........... 55
7.3.6 To play back recordings in sequence ........... 55
7.4 Editing a recording ......................... 56
7.5 Copying a recording ........................ 56
7.6 MP3 playback ............................ 57
7.7 Transferring recording files .................... 58
7.8 Formatting the hard disk ...................... 59

vi Contents
8 Accessing to The Digital Receiver via The Internet 61
8.1 Configuring the router ....................... 62
8.1.1 To access from local area network ............ 62
8.1.2 To access from Internet .................. 63
8.2 Configuring the digital receiver .................. 64
8.3 Accessing the web server ..................... 68
8.4 Accessing the FTP server ...................... 70
9 Firmware Update 73
9.1 Checking the firmware information ............... 73
9.2 From your computer via USB port ................ 75
9.3 From your computer via RS-232 port ............... 76
9.4 From another digital receiver via RS-232 port .......... 77
Index 78

1
Chapter 1
Introduction
The TF 6000 PVRt digital receiver is fully compliant with the
international Digital Video Broadcasting (DVB) standard, and
can receive digital broadcasts. For its operation you need an
antenna, which must be installed appropriately.
NOTE
In general we equate a channel with a frequency. Unlike ana-
logue broadcasts, however, digital broadcasts are not all as-
signed to their own frequencies; instead, multiple television
broadcasts are transmitted through a single frequency. The fre-
quency in digital broadcasting is usually called transponder. To
reduce confusion in this manual, the word service is preferably
used than channel as a term to indicate one television or radio
broadcast.
1.1 Features
The TF 6000 PVRt digital receiver has the following features:
• Can store up to 2000 television and radio services.
• You can create favourite lists of your favourite services.

2 Introduction
• You can view information about the current television or
radio programme.
• Has an electronic programme guide that provides an
overview of scheduled programmes.
• You can update the firmware of the digital receiver to the
latest version, provided by the manufacturer.
• You can record one broadcasting service while you are
currently watching another.
• The large storage capacity of the built-in hard disk drive
allows you to record up to about 60 hours of television
—in case of 250 gigabytes— in excellent picture and sound
quality.
• Time shift is a special technical feature available on the TF
6000 PVRt. You can pause the programme you are watch-
ing and resume it again at a later time. Then you can
quickly go to whatever part of the current programme by
fast foward and rewind search.
1.2 Controlling the digital receiver
The digital receiver can be operated with the remote control
and the buttons on the front panel.
NOTE
When the digital receiver is off but plugged into a wall outlet,
we say that it is in standby mode; on the other hand, when it is
on, it is in operation mode. Even when you are not using the
digital receiver, you should keep it plugged into a wall outlet
to be in standby mode so that it can run timer events at any
time.

1.2 Controlling the digital receiver 3
1.2.1 The front panel
The front panel of the digital receiver has buttons to control the
digital receiver, and specific lamps and a display to indicate its
status. The following indicates what they mean.
STANDBY button switches the digital receiver between
standby mode and operation mode.
CHANNEL
c
,
a
buttons switch to previous or next service.
They are also used to navigate in menus and interactive
screens.
VOLUME
b
,
d
buttons decrease or increase the volume.
They are also used to change values for menu options.
Front display displays the current time in standby mode,
and displays the current service in operation mode.

4 Introduction
1.2.2 The remote control
1
4
6
3
7
10
16
9
12
18
20
13
27
35
32
31
23
28
36
5
8
2
14
11
17
15
12
11
24
19
25
34
33
29
30
21
22
37
26
1

button switches the digital re-
ceiver between standby mode and
operation mode.
2

mutes the sound. Press again to
switch it back on.
3




UHF is not used in this model.
4

switches the output of the TV
SCART socket between the digital
receiver and the device connected to
the VCR SCART socket. See § 3.2.3
for more details.
5
is used to set a sleep timer.
6

Numeric buttons are used to enter a
service number for service change or
to specify values for menu options.
7

switches between the current ser-
vice and the previously viewed one.
8

displays the service information
box. It is also used to display more
information about a programme.
9




GUIDE displays the electronic pro-
gramme guide.
10




MENU displays the main menu. It is also used to return
to the previous menu from a submenu.
11




P− ,




P+ buttons switch to previous or next service.
They are also used to navigate in menus and interactive
screens.

1.2 Controlling the digital receiver 5
12




V− ,




V+ buttons decrease or increase the volume. They
are also used to change values for menu options.
13




OK displays the services list. See § 5.2.1 for more details.
It is also used to select a menu item.
14




FAV displays the favourite lists.
15




EXIT is used to exit the current screen.
16

switches between television services and radio ser-
vices.
17

is used to select an audio track and a sound mode, or
a video track of multifeed programme.
18
is used to select a subtitle track.
19
displays teletext.
20

is used to display, minify or hide the sub-screen. See
§5.6 for information about picture-in-picture.
21

changes the position of sub-screen counterclockwise.
It is also used to jump back to beginnng of recording
during a playback.
22

changes the position of sub-screen clockwise. It is
also used to jump to end of recording during a playback.
23




SAT swaps the sub-picture with the main picture. See
§5.6 for more details.
24

displays the services list for sub-screen. It is also used
to specify a block for editing or for repeated playback.
25

is used to jump back 10 seconds for an instant replay.
It is also used to edit a recording.
26

is used to jump to next bookmark position or to jump
forward by 30 seconds.
27

is used to make a bookmark during playback or time
shift.

6 Introduction
28

resumes normal playback speed, or displayes the
progress bar for navigation on playback or time shift. To
play a recorded programme, see button 35.
29

is used to start reverse playback. Subsequent presses
increase the rewind speed.
30

is used to start fast motion playback. Subsequent
presses increase the playback speed.
31

is used to start slow motion playback. Subsequent
presses change the playback speed.
32

pauses live television or playback of a recorded
programme.
33
is used to start recording.
34

is used to stop playback, to stop recording, or to
jump back to live television from time-shifted television.
35

is used to display the list of recorded programmes
that are stored on the internal hard disk drive. See § 7.2
for more details.
36




N/P is not used in this model.
37




Mis not used in this model.
The , , , and buttons have additional different
functions per menu besides their own function. They will be
guided by on-screen help.
If the remote control does not work, please check the remote
control mode. There are four modes with this remote control.
You can alter the mode by pressing two buttons simultaneously
as follows:
• Mode 1: + 



1
• Mode 2: + 



2
• Mode 3: + 



3
• Mode 4: + 



4
The mode 1 will work at default.

7
Chapter 2
Setup
2.1 Unpacking
Before going any further, check that you have received the
following items with your digital receiver.
• Remote control unit
• Two batteries for the remote control (AAA 1.5 V)
• One power cord
• One WLAN antenna for wireless local area network con-
nection
• One component cable (RCA cable)
• One S-Video cable
• One composite cable (RCA cable)
• One loop cable to link the first tuner with the second
tuner
• A copy of this user guide
NOTE
Accessories may vary according to your local area.

8 Setup
2.2 Safety precautions
Please read carefully the following safety precautions.
• The mains power must be 90 to 250 volts. Check it before
connecting the digital receiver to the wall outlet. For
the power consumption of the digital receiver, refer to
Table 2.1.
• The wall outlet should be near the equipment. Do not
run an extension lead to the unit.
• Do not expose the digital receiver to any moisture. The
digital receiver is designed for use indoors only. Use dry
cloth when cleaning the digital receiver.
• Place the digital receiver on a firm and level surface.
• Do not place the digital receiver close to heat emitting
units or in direct sunlight, as this will impair cooling.
Do not lay any objects such as magazines on the digi-
tal receiver. When placed in a cabinet, make sure there
is a minimum space of 10 centimetres around it. For
the physical specification of the digital receiver, refer to
Table 2.2.
• Protect the power cord from being walked on or pinched.
If the wires are exposed or the cord is damaged, do not
use the digital receiver and get the cord replaced.
• Never open the digital receiver casing under any circum-
stances. The warranty will be void.
• Refer all servicing to a qualified service technician.
Table 2.1: Power specifications
Input voltage 90 to 250 V AC, 50/60 Hz
Power consumption 45 W at maximum in operation
8 W in standby

2.3 Rear panel connections 9
Table 2.2: Physical specifications
Size 430×60×265 mm
Weight 4.3 kg
Operating temperature 0 to 45 °C
Storage relative humidity 5 to 95 %
2.3 Rear panel connections
The TF 6000 PVRt has a wide range of connections on the back
panel.
Y
USB
Pb
Pr
ANT 1
RF LOOP 1 OUT RF LOOP 2 OUT AUDIO
VIDEO
S-VIDEO
ANT 2 L
R
TV
VCR RS-232 S/PDIF
1
2
3
4
5
6
7
8
9
10 12 11 13
14
15
WLAN ANT
Check what connections your television set has in comparison
with the digital receiver.
1
ANT 1
Terrestrial broadcasting signal input
socket for the first tuner.
2
RF LOOP 1 OUT
Terrestrial broadcasting signal output
socket through the first tuner.
3
ANT 2
Terrestrial broadcasting signal input
socket for the second tuner.
4
RF LOOP 2 OUT
Terrestrial broadcasting signal output
socket through the second tuner.
5
VIDEO
Composite video output socket for the
television set. (yellow)

10 Setup
6
AUDIO L/R
Stereo audio output socket for the
television set or the audio system.
(white/red)
7
Y/Pb/Pr
Component video output socket for
the television set. (green/blue/red)
8
S-VIDEO Super video output socket for the tele-
vision set.
9
TV
Audio and video output socket for the
television set.
10
VCR
Audio and video input/output socket
for the video cassette recorder or such-
like.
11
RS-232
Serial port for firmware update and
data transfer.
12
S/PDIF
Dolby digital output socket for the au-
dio system.
13
USB
USB port for firmware update and data
transfer.
14
WLAN ANT
Antenna for wireless local area net-
work. See Chapter 8.
15
AC INPUT Power cord socket.

2.4 Connecting up your digital receiver 11
Table 2.3: Connectors specifications
VIDEO Composite video (CVBS) output
AUDIO Left & right audio output
S-VIDEO Super video (S-Video) output
YPbPr Component video (YUV) output
TV CVBS/S-Video/RGB/YUV video output
Left & right audio output
VCR CVBS video output
Left & right audio output
CVBS/S-Video/RGB/YUV video input for bypass
Left & right audio input for bypass
S/PDIF Dolby digital audio output
RS-232 115.2 kbps at maximum
USB 2.0 device
2.4 Connecting up your digital receiver
There are several ways to set up the digital receiver. Set up the
digital receiver suitably to your television and other appliances.
If you have any problem with your setup or need help, contact
your dealer.
2.4.1 Connecting the antenna
Whatever sort of connection you have be-
tween the digital receiver and the television,
you need to connect the digital receiver to
your television antenna so that it can receive
digital television services.
Connect the antenna cable to the ANT 1 con-
nector on the back panel of the digital re-
ceiver.
Also, you must ensure that there is a connec-
tion to both the ANT 1 and ANT 2 connectors
on your digital receiver, so that both tuners
work properly.

12 Setup
Normally you do that by using a loop cable to link from the RF
LOOP 1 OUT connector to the ANT 2 connector.
NOTE
However, if you are in a weak signal area, or are using a signal
amplifier with more than one output, you may achieve better
results by connecting a cable from the antenna or amplifier
directly to the ANT 2 connector rather than using the loop
cable.
If you have another digital receiver, or you want to still receive
analogue channels on your television, link it from the RF LOOP
2 OUT connector.
2.4.2 Connecting to your television
Between all the following connectors of the digital receiver, we
recommend you to use the first connector to get best picture
quality. If your television does not have the matching connector,
then use the next connector in the following order for better
picture quality.
1. SCART connector (TV)
2. Component connector (YPbPr)
3. S-Video connector (S-VIDEO)
4. Composite connector (VIDEO)
You should configure audio and video settings after connecting
up the digital receiver. See § 3.2 for detailed description.

2.4 Connecting up your digital receiver 13
To use the SCART connector
For best results with a standard television set,
you should use a SCART cable, plugging one
end into the TV socket on the digital receiver
and the other end into a free SCART socket
on your television.
Some televisions have inputs via Component
connector or S-Video connector rather than
SCART.
If you have such a television, use an appropriate conversion ca-
ble to link the TV socket on the digital receiver to the matching
socket on your television.
If you connect with a standard SCART cable, you do not have
to make audio connections because the SCART connector can
output stereo audio. But if you use a conversion cable, such as
SCART-to-Component, you have to make audio connections.
To use the component video connector
Y
Pb
Pr
You will need to obtain a component video ca-
ble (RCA cable) to use the component video
connector. Plug one end of the cables into the
Y(green), Pb (blue) and Pr (red) sockets on
the digital receiver, and the other end into the
matching sockets on your television.
To use the S-Video connector
You will need to obtain a S-Video cable to use
the S-Video connector. Plug one end of the
cable into the S-VIDEO socket on the digital
receiver, and the other end into the matching
socket on your television.

14 Setup
To use the composite video connector
You will need to obtain a composite video
cable (RCA cable) to use the composite video
connector. Plug one end of the cable into the
VIDEO (yellow) socket on the digital receiver,
and the other end into the matching socket
on your television.
To connect the audio connectors
You will need to obtain an audio cable (RCA
cable) to connect the audio connectors. Plug
one end of the cable into the AUDIO L (white)
and AUDIO R (red) sockets on the digital re-
ceiver, and the other end into the matching
sockets on your television or audio system.
To enjoy Dolby digital audio, your televi-
sion or audio system must be able to decode
Dolby digital audio, and you will need to ob-
tain a S/PDIF cable. Plug one end of the
cable into the S/PIDF socket on the digital
receiver, and the other end into the matching
socket on your audio system.
2.4.3 Connecting to your video cassette recorder
The digital receiver can also output video to another appliance
such as a video cassette recorder or video receiver through an
auxiliary SCART connector.