Topmaz Racing Glo Racer User manual

Contents
-RC Vehicle (Vehicle) x 1
-RC Transmitter (Transmitter) x 1
-Instruction Manual x 1
NO.: 84491
FUNCTION
EFFECT
EFFECT
1:16
PRO . S Y S TE M
PRESS BUTTON
COLOR SHIFTING
ACTION
20
RC Transmitter (Transmitter) x 1
RC Vehicle (Vehicle) x 1
2 x AAA
For Transmitter
(Not Included)
5 x AA
For Vehicle
(Included for try-me)
Battery Installation
For Vehicle (Fig. 1 and Fig. 2)
1. Switch OFF the power
2. Unscrew the screw on the battery cover
3. Open the battery cover
4. Install 5 new 1.5V AA batteries with correct polarities (+/-) as
shown inside the battery compartment
5. Close the battery cover
6. Tighten the screw on the battery cover
For Transmitter (Fig. and Fig. 4)
1. Unscrew the screw on the battery cover
2. Open the battery cover
3. Install 2 new 1.5V “AAA” batteries with correct polarities (+/-
)
as shown inside the battery compartment
4. Close the battery cover
5. Tighten the screw on the battery cover
Vehicle
Transmitter
Direction
Adjustment
Indicator
ON/OFF/
Try-me Switch
Battery
Compartment
Light & Sound
Button
Steering
Accelerator Wheel
Trigger
Vehicle
-
Battery Installation
Transmitter
-
Battery Installation
1,5V
AA/LR6/UM3
1,5V
AA/LR6/UM3
1,5V
AA/LR6/UM3
1,5V
AA/LR6/UM3
1,5V
AA/LR6/UM3

-
AA/LR6/UM3
+
+
AA/LR6/UM3
-
-
AA/LR6/UM3
+
+
AA/LR6/UM3
-
-
AA/LR6/UM3
+
1,5V
-
AA/LR6/UM3
+
1,5V
+
AA/LR6/UM3
-
1,5V
-
AA/LR6/UM3
+
1,5V
+
AA/LR6/UM3
-
1,5V
-
AA/LR6/UM3
+
1,5V
How to Bind (pair up the Transmitter and Vehicle)
84491
1. Install batteries to the Vehicle, switch ON the Vehicle.
2. Install batteries to the Transmitter, the LED on the Transmitter will flash, when it is paired up with the Vehicle, the LED on the Transmitter will stop flashing.
3. If the process is not completed, please re-do the pair upprocess.
4. As long as the batteries in both the Vehicle and Transmitter are not removed. There is no need for pair up process after switching OFF the Vehicle.
Just switch ON the Vehicle and it will be still paired up with the Transmitter.
5. In case of losing the pair up, please re-do the pair upprocess.
How To Play
1. Switch ON the Vehicle
Vehicle
2. Use the Steering Wheel to control
the Vehicle turning left or right
Turn Left Turn Right
3. Use the Accelerator Trigger to drive the Vehicle Forward, Stop andBackward
Forward Stop Backward
ON/OFF/
Try-me Switch
4. Press the button on the
Transmitter to trigger the
light & sound of theVehicle
Light & Sound Effect
Light & Sound
Button
5 a. Switch on the vehicle.
b. Turn the steering wheel to right for around 5 second and
re-start the binding process
a. Vehicle b. Binding
6. Press the button on the Vehicle to trigger the light & sound ofthe
Vehicle
7. When the light & sound is playing, press & hold the button onthe
Transmitter for 3 seconds to stop it
8. If the Vehicle does not run in straight line, adjust thedirection
adjustment on the Vehicle chassis (Fig. 1).
9. Play on smooth surface for optimum performance.
10. Remember to switch OFF the power of the Vehicle afterplaying.
11. The optimum control range is up to 20moutdoor.
Performance Tips
1. Do not drive on grass, dirt, sand, dusts, carpet or go through water.
2. Do not drive in windy or rainy weather.
3. Avoid direct impact the Vehicle with obstacles.
4. Switch OFF the power when not in use to prevent damage of Vehicle due to leakage
of electrolyte from batteries.
5. Remove all batteries from the Vehicle andTransmitter when not in use for long period.
6. Keep fingers, hair and loose clothing away from wheels.
7. The operating range can be affected by a variety of factors.
a) Low Voltage of batteries in Transmitter or Vehicle.
b) Interference from other items that emit radio frequency signals.
8. Outdoor usage is recommended in order to get optimum control range.
9. Recommend to play the vehicle on a clean and smooth surface.
10.Clean the battery compartment to make sure it is free from dust to prevent poor
contact of batteries.
FCC label compliance statement:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Declaration of Conformity
The product is in conformity with the requirement of EU Directive 2014/53/EU.
Environmental notes:
The whole product also does not belong to household waste at the end of the product life.
You can return it at collection points for the recycling of electronic and electronical instruments
The symbol on the item, instruction manual, hangtag or packing is showing this clearly.
Materials should be recycled according to their respective markings.
Recycling of old devices or other re-use of materials contained therein represents an important
contribution to environmental protection.
Please ask at your local community for the correct collection point.
Disposal of batteries
Batteries should not be disposed of in the household waste. As the consumer you are legally obliged to return
batteries containing harmful substances and all other used batteries. You can hand in your old batteries
at public collection points in your area or wherever batteries are sold.
You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing
harmful substances:
Pb=Battery contains lead
Cd=Battery contains cadmium
Hg=Battery contains mercury
KIDZTECH TOYS MANUFACTURING LTD.
Roo 1201,12/F, Inter-Continental Plaza,
94 Granville Road, TST East, Hong Kong.
Tel: [phone] [e-mail]
Made in China http://www.kidztech.net
20180605