TOPP V1 User manual

V1
Automation
for
interior
sliding doors

Topp Spa Sandrigo (VI) - Italy | www.topp.it
V1
Automation
for interior
sliding doors
Electromechanical automation for
interior sliding doors.
Max capacity 50Kg.
The V1 main features are:
V1 includes an on-board IR activation
sensor and can be combined with the WS2
microwave sensor, the HS1 touch-sensitive
button and the TS8 radio remote selector.
It can be as well used together with the
EB1 electric lock system by means of two
HS2 gesture activation keys.
The V1 is also available in the V1E model,
a basic version without receiver not
compatible with the TS8 radio remote
selector.
V1 can be easily installed on existing sliding
doors and manages the door speed by a
sophisticated electronic control with no
need of safety sensors or photocells in
accordance with the EN16005 standard,
“Low Energy Movement” section.
The TS8 remote control selector allows to
select the following functions:
Opening, Closing, Door open or closed,
Slow speed mode,Entrance only mode, Exit
only mode, Reset, Automatic mode.
CE marked device.
Technical characteristics
Plug&Play:
Pull & Go Function:
Low Energy Function:
Power supply:
Peripheral power outputs:
Max consumption:
Slow Speed Function:
Use:
Opening and closing speed:
Door weight settings:
Maximum thrust force:
Door open waiting time:
Insulation class:
Working temperature:
Maximum load:
Opening width:
Overall dimensions:
Sensors/buttons inputs:
power and self-learning operation.
pull gently to activate the automatic movement.
complies with the EN16005 standard.
230V ~ 50Hz.
5V 80mA / 24V 110mA.
15W (100mA 230V).
slow speed to reduce the noise level (night mode).
continuous.
in accordance with the EN16005 standard depending on the door weight.
from 150N to 500N adjustable every 35N by the installer.
62N.
adjustable from 2s to 60s.
classe II.
- 5°C + 50°C.
500N.
from 700 mm up to 1000 mm by micro adjustments.
height 59 mm - Depth 59 mm - Length 700-1000 mm adjustable.
2 inputs.
The V1 automation system for interior sliding doors, with minimal
dimensions and appealing design, has been designed to be easily
installed also on existing doors.
Easy installation.
Simple adaptability to
existing sliding doors.
Minimal dimensions and
appealing design.

www.topp.it
Installation steps
Verify that the minimum distance
between the door wing and the frame is
at least 5 mm.
Cut the seal brush at 60 mm from the top
of the door in order to allow the rail
installation.
1
Fit the automation to the side bracket. Secure the 4 screws to the rail
connection guide.
Install the safety stop. Adjust the trimmer according to the door
weight.
2
6 7
11 12
V1
Installation
The V1 automation system
has been designed to be
easily installed also on
existing interior sliding
doors without the need to
modify the frame.

Cut the seal brush at 60 mm from the top
of the door in order to allow the rail
installation.
Install the rail on the door panel. Loosen the screws for the telescopic
adjustment of the automation. Mount the side bracket on the door frame.
Adjust the automation length in order to
have it parallel to the door and secure
the screw to the side bracket.
Center the automation and secure the
screws on the back of the mechanism. Connect the IR sensor.
Adjust the trimmer according to the door
weight. Plug in the automation. Initialize the automation by pressing the
S1 button for 7 seconds and wait until 3
cycles of opening and closing are
completed.
Press the S2 button for 3 seconds and
then any button of the remote selector to
program it.
3 4 5
8 9 10
13 14 15

The V1 automation can be useful
where it is not possible or convenient
to use your hands to open the door...
Application
To go to the office carrying documents...
To go in the living room
to offer your friends a
coffee...
To go to the laundry room
with a load of clothes...
To go to your room and get ready for a
nice evening...
To go to the kitchen with your shopping bags...
...the door automatically opens and closes.

Electric lock for interior sliding doors
Gesture activation key for the activation/deactivation of
the EB1 electric lock.
• Mechanical locking of the door through activation of
the HS2 gesture activation key
• Light indication of vacant/occupied visible on the HS2
gesture activation key
• Emergency manual release of the lock (either from
inside or from outside)
HS2
Gesture activation key
Gesture activation key for the activation/deactivation of
the EB1 electric lock
V1 Accessories
TS8
8 functions radio remote selector with magnetic
wall-mounting stand
1. Opening
2. Closing
3. Door lock
4. Slow speed mode
HS1
Gesture activation key
External gesture activation key
WS2
Microwave sensor
External microwave activation sensor
EB1
5. Entrance only mode
6. Exit only mode
7. Reset
8. Automatic mode
EB1 electric lock installation IManual release installation
(included with the EB1 electric lock)
Installation completed