eZLO Secure User manual

Manual
Secure
Smart Home Controller

Thanks for choosing the Ezlo Secure
You’ve aken he rs s ep oward making
your home smar er and safer.
It’s easy to set up your hub
Here is what you have to do.

Install the Vera app on your mobile evice. Just
look for the in the iOS App Store or on
Google Play
If you alrea y have the Vera app, just log in.
For starters, your Ezlo Plus hub operates on
the Vera app.
If you just ownloa e the app, tap on New to
Vera an select Ezlo Secure from the list of
controllers
If you alrea y have an account, tap A New
Controller an select the Ezlo Secure from the
My Controllers list.
SET UP

N xt, conn ct th A/C pow r adapt r to your Ezlo S cur .
Onc it is pow r d on, th LED should slowly chang from
gr n to blu 
Wait for a st ady blu light b for proc ding.

The Ezlo Secure supports both wired and
wireless setup. Select your preferred option
and follow the prompts.
Congratulations! Your Ezlo Secure is now connected and its
LED will remain steady blue.
If you don't already have one, it's time to create your
account. The app will walk you through it.

Make your home safer. Make your life easier
The zlo Secure lets you control Z-Wave™, Zigbee, and
Wi-Fi devices from a single app. When you add devices
such as lights, thermostats, sensors, cameras, and door
locks to your Vera system, you’ll be able to enjoy greater
comfort and peace of mind with just a touch.
The Vera app oers some key features that help you
simplify things at home and help you keep an eye on things
when you’re away
Mode
Modes give you the power to control all your devices with a
single tap. There are pre-set modes for Home, Away, Night,
and Vacation
Scene
The true power of home automation is when your home
can do things for you. With Scenes you can schedule your
lights to turn o when you leave for work in the morning,
or to fade up as day turns to night
Notication
Your Vera system can send push notications and emails to
let you—or other users—know about what’s going on at
home.
Control your home from anywhere

Need help seing up
You can reach our Customer Care team seven da s a week
at 866.966.2272 between 6am and 10pm US CST/EST* or
at
You can also purchase our Vera Eas Start service and get
one hour of personalized setup assistance through a phone
call with one of our most experienced agents
Visit to learn more
To nd the complete User Guide, as well as information
about the products FCC/IC registration, visit getvera.com/
support and click on “Downloads, Firmware & Manuals.
[e-mail]
getvera.com

Inclusion and Exclusio
Yo r Ezlo Sec re Controller can work with all Z-Wave
devices, s ch as sensors, alarms, door locks, thermostats,
etc. Over a tho sand Z-Wave devices are available from
many brands. (Z-Wave is a wireless comm nications
system; check the package or specs to see if a device ses
Z-Wave.
The Ezlo Sec re can be operated in any Z-Wave network
with other Z-Wave certied devices from other
man fact rers. All mains operated nodes within the
network will act as repeaters regardless of vendor to
increase reliability of the network
Before Ezlo Sec re can control a device, it m st be
incl ded into the Vera system.
Vera are available for select
devices that pass stringent Vera Labs testing for
compatibility and q ality. The C stom Device Wizards
make Incl sion/Excl sion easiest, with specic details for
each device. A list of these devices is available and
pdated at hps://ezlo.com/device-compatibility
For all other Z-Wave devices, a Generic Device Wizard is
sed for Incl sion/ Excl sion. A Generic Device Wizard is
available for each device category (thermostats, sensors,
alarms, etc.)
C stom Device Wizards

Adding Z-Wave Devices t y ur Ezl Secur
Before Ezlo Secure can control a device, it must be added
into the system
Start using your Ezlo Secure by adding devices like lights,
thermostats, sensors, and more. Just tap the menu icon at
the top left of the dashboard, select Devices, and then tap
the + sign to launch the Device Pairing Wizard.
From your Dashboard, go to > tap on the + in
the top right corner and select or search the name or
type of device that you wish to pair with your Ezlo Plus.
Devices
1.

To add a generic Z-Wave device, select the
from the device
categories.
Generic Z-Wave device
To add the device
with your Ezlo
Secure, if the
device requires
assembly read the
manual, follow the
assembly
instructions there,
power the device,
and click Next.
2.
3.

Once the blue message at the top of the
page says , follow the
process as described in the user manual.
Add new device now
If successful, you will get a blue message
at the top of the page saying
and a
message.
Device was
congured Device Detected
4.
5.

To nish, choose a
name for the new
device, add the
device to
favorites
(optional), edit the
name, assign it to
a room, and click
I’m done adding
devices.
Note: If the device was previously included with a dierent
Z-Wave system, you’ll need to exclude it before adding it
with your Ezlo Secure. (You may also need to do this if you
have problems Inclusion/Exclusion the rst time.) Press the
Retry buon to start the exclusion process. Once the
device is excluded, add it by following the inclusion steps.
6.

Adding a Z-Wave Device to Ezlo
Secure (SmartStart adding
With SmartStart you can add Z-Wave devices
automatically by scanning their QR codes.
From your Dashboard go to > tap
on the + in the top right corner.
Devices
Select the Z-Wave SmartStart entry. Tap
on the Arrow next to the text.
1.
2.

On he box of your device, you should nd a QR code,
usually labeled wi h a Smar S ar i le. When you
selec "Z-Wave Smar S ar " in he iOS app, he camera
of your phone will be urned on o scan he QR-code.
Once a QR code has been scanned he adding process
s ar s.
3.

The device is added to the system and you
will see a Set Up Device screen. To
continue, choose a name for the new
device, edit the name, assign it to a room,
and click Continue.
Select the connection. S2 Access -
selected by default
4.
5.
Select the inclusion type - SmartStart. Tap
on the buon. Continue
6.

elect another connection security type.
Enable the toggle to see the list with all
connection types available. Once you’ve
selected the type of encryption, tap on
 2 - Access - Full securit
 Access Control - Encrypted connectio
 2 - Authenticated - Encrypted
connectio
 2 - Unauthenticated - Encrypted
connectio
 0 - Encrypted connectio
Continue
If the 2 Access is checked, by default all
options under Advanced are checked
If the 2 Access is unchecked, all options
under Advanced are unchecked
You are able to select whichever options
you choose from the Advanced list
7.

In the next step, you will see the
conrmation screen that your device is
ready
Just turn on your device and it will be
added automatically. You can check the
SmartStart device state in Seings
Turn on your device. You will get a push
notication
Tap on the notication and the VeraMobile
app is opened to the list of SmartStart
devices.
New device available
8.
9.

On the SmartStart devices, you can see all
added devices with statuses.
10.

To manage all SmartStart devices you
scanned you need to tap on the side menu, tap
on Seings.
On the seings screen, tap on SmartStart
Devices.

If you don't have any device that has
SmartStart support, you will see an empty
SmartStart Devices screen. Also, from this
screen, you can add a SmartStart device by
tapping the buon.Add a SmartStart device
If you added at least one Z-Wave device via
SmartStart, you will see a SmartStart Devices
screen with a list of devices.