Tornado ExSELLerate Marathon 350 Manual

TORNADO INDUSTRIES
7401 W. Lawrence Avenue
Chicago, IL 60706
[phone] FAX [phone]
www.tornadovac.com
Tornado® Operations & Maintenance Manual
MODEL NO.
98132 Marathon 350
L9728 ©Tornado Industries All rights reserved

2
Table of Contents
General Information ....................................................................................................................................... 3
Important Safety Advice............................................................................................................................. 3
Guidelines for The Operator....................................................................................................................... 3
Transporting the Machine........................................................................................................................... 4
Electrical Connection ................................................................................................................................. 4
Controls .......................................................................................................................................................... 4
Preparing for Use............................................................................................................................................ 5
Operation........................................................................................................................................................ 5
Starting the Machine................................................................................................................................... 5
Using the Machine...................................................................................................................................... 5
Cleaning Carpet .......................................................................................................................................... 5
Cleaning Stairs............................................................................................................................................ 5
Cleaning Upholstery................................................................................................................................... 6
When Cleaning is Finish................................................................................................................................. 6
Draining and Cleaning................................................................................................................................ 6
Storage........................................................................................................................................................ 6
Maintenance ............................................................................................................................................... 6
After Sales Service ......................................................................................................................................... 6
Warranty......................................................................................................................................................... 7
Technical Specification .................................................................................................................................. 7
Fault Diagnosis............................................................................................................................................... 8
IMPORTANT: Read these instructions before use and retain for future reference.

3
General Information
The Marathon 350 carpet soil extraction machine is designed for the efficient cleaning of carpets and
upholstery. It has been designed for the professional user to ensure long service life and safe operation.
We recommend that any user not familiar with carpet cleaning should read these instructions fully before
using the machine. Please contact Tornado Industries for questions on the contact details provided at the
back.
This machine must only be used for the manufacturer’s approved application. The Marathon 350 is
designed for the cleaning and removal of normal carpet soil. Do not use the machine where it is suspected
that the carpet or upholstery contains health endangering dust or debris such as asbestos or chemical waste.
If this is suspected, do not proceed. Contact your supervisor or Tornado Industries for advice.
The following instructions contain important information about the machine and safety advice of the
operator.
Equipment must be operated, serviced and maintained in accordance with the manufacturer’s instructions.
If in doubt, contact the supplier of your machine.
Important Safety Advice
When using electrical equipment basic safety precautions should be followed including the following.
•Read all instructions carefully before use.
•Keep children and unauthorized persons away from the machine when in use.
•Do not leave the machine connected to the electricity supply when not in use; always remove the plug
from the socket-outlet.
•Switch off the machine before removing the plug
•When unplugging, pull the plug and not the supply cord.
•Do not operate switches or touch the main plug with wet hands as this may cause electric shock.
•Do not operate the machine with a damaged supply cord or plug, or after the machine malfunctions or
is damaged in any way. Contact an authorized Service Agent for repair or adjustment.
•The plug of the power supply cord must be removed from the socket-outlet before commencing
cleaning of the machine or undertaking maintenance operations.
•The power supply cord must be regularly inspected for signs of damage. If the power supply cord is
damaged, it must be replaced.
•Do not use where hazardous dust is present.
•Do not use in an explosive atmosphere.
•Do not pick up oil or other flammable material with the machine.
•Take care when using the machine near the top of stairs.
Guidelines for The Operator
•Operators must be fully trained in the use of the machine in accordance with these instructions, able to
perform user maintenance and the correct selection of accessories.
•Operators should be physically capable to maneuver, transport and operate the machine.
•Operators should be able to recognize unusual operation of the machine and report any problems.
•Wear suitable footwear to avoid slipping.
•Wear suitable clothing to keep dry and warm.
•Where possible, implement job rotation and adequate rest periods to avoid continuous use of the same
muscles.
•Do not leave the machine running unattended.
•Do not allow children to crawl on carpets until it is thoroughly dry.
•Keep cleaning solutions away from children and pets at all times.
•Do not smoke when using the machine.

4
•Caution – This machine is for indoor use only and should not be used or stored outdoors or in wet
conditions.
•Warning – Should water emit from the machine exhaust, switch off immediately and refer to
instructions for “Using the Machine”.
Transporting the Machine
When transporting the machine ensure that all components, tanks and removable parts are securely
fastened, and that the supply cord and plug are not trailing. Detach hose and wand from machine for ease
of carriage.
Do not lift or transport the machine when it contains liquid, as it will add considerable weight.
Take extreme care when moving the machine up and down the stairs.
Caution – Incorrect lifting techniques may result in personal injury. We advice that the manual handling
regulations are followed.
Electrical Connection
•Before connecting the machine to the power supply, check that your supply voltage corresponds with
that marked on the rating label on the rear of the machine.
•IMPORTANT – If the supply cord is damaged, it must only be replaced by a special cord available
from the manufacturer or an authorized service agent.
Should an extension cord be used, ensure cord rating is adequate for the equipment. Do not use extension
cord in coiled condition as this could result in overheating of the cord.
Controls
1. Hose release catch
2. Vacuum hose
3. Solution outlet
4. Anti-foam tank
5. Solution pump switch
6. Vacuum switch
7. Machine cover
8. Removable solution tank
9. Removable recovery tank
10. Filters

5
Preparing for Use
•Make sure both tanks are clean before use.
•Connect the flexible vacuum hose onto the vacuum hose inlet and the
high-pressure spray hose onto the solution outlet. (fig. 1)
•Connect the vacuum hose and the high-pressure spray hose to the
carpet cleaning wand or the upholstery tool.
•Fill the clean water tank with detergent and water. Use the correct
dilution rate for the detergent. Never over fill.
•Fill the anti-foam tank with an appropriate de-foamer solution.
•Important – Always use low foaming carpet cleaning chemicals. If using foaming carpet cleaning
chemical, or if foam develops due to residues in the carpet, ensure that an appropriate de-foamer is
used in the anti-foam tank.
Incorrect chemicals could cause damage to the carpets being cleaned or cause the machine to malfunction.
Operation
Starting the Machine
•Connect the cable to main power.
•Ensure the slider on top of the trigger unit is in the closed position
•Switch on the unit spray and/or vacuum.
•Squeeze the trigger to spray solution onto the carpet/upholstery.
Maintain a constant pressure of the wand/tool onto the surface to be
cleaned. (fig. 2)
Using the Machine
•To dry the surface being cleaned, complete the cleaning with a second pass with the vacuum (and no
spray).
•Never soak the textile being cleaned while spraying.
Cleaning Carpet
Color Fastness – Before using cleaning solution or pre-spotter, test carpet for color fastness on an
inconspicuous area. Apply solution to a small piece of clean white material or tissue, and then rub on
carpet vigorously. Excessive amounts of dye showing on the material indicate that the color is not fast, and
the carpet should not be wet cleaned.
•Move furniture around to give a clear working area. Cover bottoms of furniture legs where necessary
(aluminum cooking foil is ideal). Pin up curtains and drapes.
•Vacuum carpet thoroughly to remove any residual dust or debris.
•Areas of heavy carpet soiling can be removed more easily if first treated with a concentrated cleaning
solution or pre-spotting solution.
•Rate of cleaning will depend upon the thickness of the carpet and the degree of dirt in the area being
cleaned.
•Do not clean any more than twice. Carpets may shrink if they are over-wet or not properly fixed
down.
Cleaning Stairs
CAUTION – When cleaning on stairs take great care to ensure that machine is stable, otherwise it may
cause injury to either the operator or a third party. Use the stair/upholstery tool for cleaning in place of the
wand assembly.

6
Cleaning Upholstery
This is done in the same way as carpet cleaning except using the upholstery tool in place of the wand
assembly. Cleaning is achieved using a gentle dragging motion of the upholstery tool over the material.
•An inconspicuous area of the item to be cleaned should always be tested for color fastness prior to
cleaning. Should doubt exist as to the suitability of the fabric for wet cleaning, the chemical
manufacturer should be consulted for advice.
•Loose cushions should be removed and cleaned separately.
•Care should be taken to avoid over-wetting the fabric.
When Cleaning is Finish
Draining and Cleaning
•Before removing the spray hose, pressure in the system must be released. With the pump switched off,
hold the spray nozzle over the removable recovery tank and squeeze the spray trigger until the
remaining solution has been released. The spray hose can now be disconnected.
•After use, check that both solution tanks are empty.
•Empty the solution tank and rinse.
•Empty the recovery tank and rinse clean.
•Rinse both tanks out with clean water before storing the machine.
•Clean nozzles and hoses.
Storage
•Always unplug, empty, wipe down and dry the machine after use.
•Wrap supply cord around the handle of the machine ensuring that the plug is not trailing on the floor.
Store the machine in a dry indoor area only.
Maintenance
WARNING – Before undertaking maintenance operations or adjustments, switch off machine and unplug
from the electricity supply.
The machine requires minimum maintenance apart from the following checks by the operator.
•Supply cord – Regularly inspect sheath, plug and cord anchorage for damage or loose connection.
•Solution tank – Check filters are clean and undamaged. A damaged or missing filter must be replaced
or damage to pump head and spray jet may occur.
•Vacuum filter – Check the vacuum filter is cleaned and replaced as appropriate.
•Vacuum head – Check and remove and debris or lint build-up from the head.
•Spray jet – Check jet for blockage and full spray pattern. Blow through jet to clean. Do not use a pin,
as this could damage the jet.
IMPORTANT – All other servicing and repairs should only be performed by a Tornado engineer or an
Authorized Service Agent.
IMPORTANT – Should the machine fail to operate please refer to the fault diagnosis section in the back of
the instruction manual. If the problem/remedy is not listed, please contact Tornado Customer Service
Department.
After Sales Service
Should you require after sales service, please contact the supplier from whom you purchased the machine,
who will arrange service. Repairs and servicing for Tornado products should only be performed by trained
staff. Improper repairs can cause considerable dangers to the user.

7
Warranty
The warranty for your product is two years on parts, excluding wear items, tools and attachments and one
year labor, from the date of original purchase, or hire purchase, against defects in materials or workmanship
during manufacture. Within the warranty period we undertake at our discretion, to repair or replace free of
charge to the purchaser, any part found to be defective, subject to the following conditions.
Conditions:
1. Claims made under the terms of the warranty must be supported by the original invoice/bill of sale
issued at the time of sale, or the machine Serial Number.
2. For claims under this warranty contract the supplier from whom you purchased the product who will
arrange the appropriate action. Do not initially return the product as this could result in transit damage.
3. Neither Tornado nor its distributors shall be liable for any incidental or consequential loss.
4. This warranty does not cover any of the following:
•Periodic maintenance, and repair or replacement of parts due to normal wear and tear.
•Damage caused by accident, misuse or neglect, or the fitting of non-genuine Tornado parts.
•Defects in non-genuine Tornado parts, or repairs, modifications or adjustments performed by other
than a Tornado Service Engineer or Authorized Service Agent.
•Cost or risk of transports relating directly or indirectly to the guarantee of this product.
•Consumable items and wear parts such as hoses, tools and attachments.
This warranty does not affect your statutory rights, or your rights against the supplier arising from their
sales or purchase contact.
Technical Specification
Model Marathon 350
Voltage V 110
Pump Type magnet
Pump Power W 50
Pump Pressure Bar/psi 4/58
Flow Rate gal/min .5
Vac Hose Length ft 10
Vac Motor W 1100
Water Lift mm/kPa 2000/20
Airflow gal/sec 10.14
Solution Tank Capacity gallon 1.5
Recovery Tank Capacity gallon 1.5
Sound Pressure Level dB(A) 78
Size (L x W x H) inches 21 x 15 x 17
Cable Length ft 15
Weight lbs. 22
Warranty 1 year

8
Fault Diagnosis
Problem Reason Remedy
The spray pump and vacuum
does not work
•Power failure •Check the main fuse*, the power
supply cord and the plug
No spray or the spray is not
even
•Spray nozzle is blocked
•Solution tank is empty
•Solution feed filter
blockage
•Check the spray pipe and nozzle
•Is there water in the tank? If there is
water in the tank, wait for a couple of
seconds for the pump to build up
pressure
•If the tank is empty, fill it as indicated
•The filter in the clean water tank, the
pipe or the nozzle may be blocked.
Switch off the unit and perform
maintenance.
The vacuum power fails •The recovery tank may
be full
•Empty recovery tank.
*If the fuse blows several times, the machine should be checked by an authorized Service Agent.