Toro Greensmaster 120-9600 User manual

FormNo.3390-822RevA
HighHeight-of-CutKit
Greensmaster®DPAReelMowers
ModelNo.120-9600
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
Thisproductcontainsachemicalorchemicals
knowntotheStateofCaliforniatocausecancer,
birthdefects,orreproductiveharm.
1.Disengagethedrives,lowerthereels,settheparking
brake,andstoptheenginebeforeadjustingtherollers.
2.Loosenthescrewssecuringthefrontrollershafttothe
height-of-cutarms(Figure1).
3.Removethefrontroller(Figure1).
4.Removetheplowbolts,washersandnutssecuringthe
height-of-cutarmstothecuttingunitsideplate(Figure
1).
5.Removetheheight-of-cutarms.
6.Removetheadjustingscrewsfromtheheight-of-cut
arms(Figure1).
4g017167
Figure1
1.Height-of-cutarm3.Adjustingscrew
2.Plowbolt,washer,and
angenut
4.Screw
7.Applyananti-seizelubricanttothethreadsofthe
adjustingscrews.Threadthescrewsintothenew
height-of-cutarms.
8.Looselymounttheheight-of-cutarmstothecutting
unitsideplateswiththeplowbolts,washers,andnuts
previouslyremoved.
9.Installtherollerintotheheight-of-cutarms.
10.Centertherollerbetweentheheight-of-cutarms.
Installandtightenthenewscrewssecuringtheroller
shafttotheheight-of-cutarms.
11.Removethescrewsandnutssecuringtherearroller
bracketsandspacerstothesideplatemountinganges
(Figure2).Discardthescrewsandnuts.
g017200
Figure2
1.Spacers3.Rearrollerbracket
2.Sideplatemountingange
Note:OlderFlex21cuttingunitsdonothaveaside
platemountingange(Figure2).Skipsteps11-14if
thekitisbeinginstalledonanoldermodelunitand
discardthespacers.
©2014—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3390-822*A

12.Usethechartbelowtodeterminetheamountof
spacersthatneedtobepositionedbelowthesideplate
mountingangestoattainthedesiredheight-of-cut.
RearRoller
Spacers
Height-of-Cut(mm)Height-of-Cut
(inches)
09.5to11.9mm0.375to0.469inches
1>11.9to14.3mm0.469to0.563inches
2>14.3to16.7mm0.563to0.656inches
3>16.7to19.1mm0.656to0.750inches
4>19.1mm0.750inches
13.Usingthescrews,includedinthekit,installtherear
rollerbracketsandtherequiredamountofspacersto
theundersideofthesideplatemountinganges.
14.Installtheremainingspacersontothescrewsabove
thesideplatemountingangesandsecurewiththe
suppliednuts.
15.Adjusttothedesiredheightofcutandtightenthe
height-of-cutarmmountingfasteners.
Note:Asthereelwears,thestandardheight-of-cut
armsmayneedtobeinstalledtoattaindesiredheight
ofcut.
2