Toro HoverPro 450 User manual

FormNo.3449-865RevA
HandlebarExtensionKit
HoverPro®450/550Machine
ModelNo.02628
InstallationInstructions
Installation
MediaandAdditionalParts
DescriptionQty.Use
Handlebarextension1
Operator-presencecontrolcable1
Handwheelknobs2
U-bolt2
Cabletie3
Installthehandlebarextensionkit.
Note:Retainallremovedpartsforlaterinstallation
unlessotherwiseindicated.
1.Shutofftheengine,removethekey(if
equipped),waitforallmovementtostop,and
allowthemachinetocool.
2.Removetheoperator-presencecontrolcable
fromthehandlebar(Figure1).
g367354
Figure1
1.Bolt(1/4x1-3/4inches)3.Handlebartting
2.Upperhandlebar4.Locknut(1/4inch)
3.Disconnecttheremovedcablefromthe
operator-presencebailbracketbyanglingthe
cablettingfree(Figure2).
g367355
Figure2
1.Operator-presencebail
bracket
2.Cabletting
4.Removetheotherendoftheremovedcable
fromtheengine.
Important:Notehowthecableisconnected
totheengine,thenewcableisinstalledin
thesameway.
Note:Youmaydiscardtheremoved
operator-presencecontrolcable.
5.Removethe2handwheelknobs,washers,and
U-boltsthatsecuretheupperhandlebartothe
lowerhandlebar(Figure3).
©2021—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.OriginalInstructions(EN)
PrintedintheUK.
AllRightsReserved*3449-865*

g364684
Figure3
1.Lowerhandlebar4.Upperhandlebar
2.Handwheelknob5.U-bolt
3.Washer(6mm)
6.Securethehandlebarextensiontothelower
handlebarusingthe2handwheelsand2U-bolts
provided(Figure4).
g373226
Figure4
1.Operator-presencecontrol
cable
3.U-bolt
2.Handwheel4.Handlebarextension
7.Usingthe2handwheelsand2U-boltsyou
removedinstep5,securetheupperhandlebar
tothehandlebarextension(Figure3).
8.Usethemountingfastenersyouremovedinstep
2,securetheprovidedlongeroperator-presence
controlcabletotheupperhandlebar(Figure1).
9.Connectthenewlyinstalledcabletothe
operator-presencebailbracketasshownin
Figure2.
10.Hooktheloosecablettingonthenewcable
intotheywheelbrakelever,thenpullthebrake
controlcabletautandslideitintothebracket
asshowninFigure5.
2

g018582
Figure5
1.Flywheelbrakelever3.Brakecontrolcable
2.Bracket4.Loosecabletting
11.Usingthesuppliedcableties,securethecable
tothehandlebarupperandlowersections.
12.Operatethemachineandensurethatthe
operator-presencebailshutsoffthemachine
whenitisreleased;refertotheHoverPro
Operator’sManual.
Important:Whenyoureleasethe
operator-presencebail,boththeengineand
cuttingdiscshouldstopwithin3seconds.
Iftheydonotstopproperly,stopusing
yourmachineimmediatelyandcontactan
AuthorizedServiceDealerorauthorizedToro
distributor.
Note:Usecarewhenmaneuveringthe
machine,thelongerhandlemaymake
maneuveringmoredifcult.
Becarefulwhenmovingorstoringtheunitto
preventthelatchingmechanismfrombreaking.
3