Toro PowerMax 38614 Manual

FormNo.3366-129RevB
PowerMax®Snowthrower
ModelNo.38614
SetupInstructions
Setup
Important:RefertoyourOperator’sManualfor
safety,maintenance,andwarrantyinformation.
1.Positiontheupperhandleoverthelowerhandle.
Note:Donotremovetherubberbanduntilyou
haveinstalledthehandle.
Important:Routethe2cablesattachedto
theQuickStickinsidetheupperhandlelegs
(Figure1).Donotpinchthecables.
Figure1
1.Cables
2.Securetheupperhandle(Figure1).
3.Removethehairpincotterandwasherfromtheend
ofthespeedcontrolrodandinserttheendintothe
lowerlinkarm(Figure2).
Figure2
4.Securetherodendwiththewasherandhairpin
cotter.
5.Removethehairpincotterandtheouterwasher
fromthetrunnionontheupperendofthespeed
controlrod(Figure3).
Figure3
1.Speedselectorlever3.Innerwasher
2.Trunnion4.Outerwasher
Note:Donotremovetheinnerwasher(Figure3).
6.ShiftthespeedselectorleverintoPositionR2.
7.Rotatethelowerlinkarmup(Figure4).
Figure4
8.Liftupthespeedcontrolrodandinsertthetrunnion
intheholeinthespeedselectorleverlocatedunder
thecontrolpanel(Figure3).
Note:Ifthetrunniondoesnottintothehole
whenyouliftupthespeedcontrolrod,rotatethe
trunnionupordownonthespeedcontrolroduntil
itts.
9.Securethetrunnionandupperendofthespeed
controlrodwiththeouterwasherandahairpin
cotter.
©2011—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved

Note:Foreasierinstallation,lookdownthrough
theopeninginthespeedselector(Figure5).
Figure5
1.Speedselector
10.UnwraptheQuickStickandrotateitsothatitis
uprightandinthecenter.
11.Holdthebluecapdownandpulltheleverfullyback.
Note:Thedischargechuteanddeectorshould
faceforward.Iftheydonot,holdthebluecapdown
(butdonotmovetheQuickStick),androtatethe
dischargechuteuntiltheydo.
12.Aligntheattenedendofthelongrodwiththe
attenedendoftheshortrodthatextendsfromthe
controlpanelsotheynesttogether(Figure6).
Figure6
1.Shortrod2.Longrod
13.Insertthelongrodendintothebackofthechute
gearcoveruntilitslidesintothegear(Figure7).
Figure7
14.Aligntheholesinthenestedendsoftherodsand
insert2boltsthroughtheshortrodfromtheleft
side(fromtheoperatingposition).
15.Insertthecableclipthatsupportsthedeectorcable
ontheforwardbolt,andsecuretheboltswiththe
locknutsprovided(Figure8).
Figure8
1.Cableclip2.Deectorcable
16.HoldthebluecapdownandrotatetheQuickStick
inacircletoensurethatthechuteanddeector
worksmoothly.
17.Tooperatethesnowthrowerusingtheself-propel
feature,slidethewheelsoutwardandinserttheaxle
pinsthroughtheholesinthewheelhubsandthe
inneraxleholes(Figure9).
Figure9
2