Toro 88716 User manual

Form No. 3460-954 Rev A
Flex-Force Power System™ 14in or 16in 60V MAX String T rimmer
88716
Desbrozadora de hilo 60 V MAX de 36 cm (14") o 41 cm (16") con
Flex-Force Power System™
88716
Débroussailleuse à l Flex-Force Power System™ 60 V MAX de
36 cm (14 po) ou 41 cm (16 po)
88716
www .T oro.com.
*3460-954*

Form No. 3460-951 Rev A
14in or 16in 60V MAX String
T rimmer
Flex-Force Power System
™
60V MAX
Attachment
Model No. 88716 —Serial No. 323000001 and Up
Register at www .T oro.com.
Original Instructions (EN)
*3460-951*

For assistance, please see
www .T oro.com/support
for instructional videos
or contact 1-888-384-9939
before returning this
product.
W ARNING
CALIFORNIA
Proposition 65 W arning
The power cord on this product contains
lead, a chemical known to the State
of California to cause birth defects
or other reproductive harm. W ash
hands after handling.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer , birth defects,
or other reproductive harm.
Introduction
This trimmer is intended to be used by residential
homeowners to trim grass as needed outdoors. It is
to be used only by adults. It is designed to be used in
combination with the T oro Flex-Force Power System
60V MAX Attachment-Capable Power Head Model
51810T . Using this product for purposes other than
its intended use could prove dangerous to you and
bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. Y ou are responsible for
operating the product properly and safely .
V isit www .T oro.com for product safety and operation
training materials, accessory information, help nding
a dealer , or to register your product.
Whenever you need service, genuine the
manufacturer parts, or additional information, contact
an Authorized Service Dealer or the manufacturer
Customer Service and have the model and serial
numbers of your product ready . Figure 1 identies
the location of the model and serial numbers on the
product. W rite the numbers in the space provided.
Important: W ith your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty , parts, and other
product information.
g426370
Figure 1
1. Model and serial number location
Model No.
Serial No.
© 2023—The T oro® Company
81 1 1 L yndale A venue South
Bloomington, MN 55420
2
Contact us at www .T oro.com.
Printed in China
All Rights Reserved

Safety-Alert Symbol
The safety-alert symbol ( Figure 2 ) shown in this
manual and on the machine identies important safety
messages that you must follow to prevent accidents.
g000502
Figure 2
Safety-alert symbol
The safety-alert symbol appears above information
that alerts you to unsafe actions or situations and
is followed by the word DANGER ,W ARNING , or
CAUTION .
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury .
W ARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury .
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury .
This manual uses two other words to highlight
information. Important calls attention to special
mechanical information and Note emphasizes general
information worthy of special attention.
The Model 51810T Power Head is compatible with
a variety of T oro-approved attachments that, when
combined, comply with specic standards; see the
following table for more detail.
Combination
Power
Head
Model
Attachment
Model
Standard
String
T rimmer
51810T 88716
Conforms to
UL STD 82
Certied to CSA
STD C22.2 No. 147
Edger 51810T 88710
Conforms to
UL STD 82
Certied to CSA
STD C22.2 No. 147
Pole Saw
51810T 88714
Conforms to
UL STD 82
Certied to CSA
STD C22.2 No. 147
Cultivator
51810T 88715
Conforms to
UL STD 82
Certied to CSA
STD C22.2 No. 147
Hedge
T rimmer
51810T 88713
Conforms to UL
STD 62841-4-2
Certied to CSA STD
C22.2 62841-4-2
3