Toshiba Sitecom CN-512 Installation instructions

USB Bluetooth Adapter
CN-512 Bluetooth 2.0+EDR klass 2
CN-520 Bluetooth 2.0+EDR klass 2
CN-521 Bluetooth 2.0+EDR klass 1
Full Manual
Copyright © 2005 Toshiba Corporation
All rights reserved

Index
INTRODUCTION 1
CHAPTER 1
Supported profiles 2
Supported languages 3
Supported operating systems 3
Limitations 3
CHAPTER 2
Setup for Windows 98SE/ME/2000/XP 5
CHAPTER 3
Basic setting 9
Express Mode Set-up 9
Custom Mode Set-up 16
CHAPTER 4
Making the most of your Bluetooth
device 24
Connecting to the internet 24
Connecting to the internet using a modem
station 24
Connecting to the internet using a mobile
telephone 33
Connecting to a network[LAN] 42
Connecting to a LAN using an access
point[LAP] 42
Connecting to a LAN using an access
point[PAN] 51
Sending Files 57
Exchanging Files with a PC or PDA 57
Sending images to a mobile telephone 63
Exchanging business card data with a PC
or PDA 66
Synchronizing data with a PDA 76
Connecting using ActiveSync 76
Fax transmission 86
Using a modem station for fax
transmission 86
Using a mobile telephone for fax
transmission 106
Using a Bluetooth-compatible camera 120
Using a headset communicate 125
CHAPTER 5
Advanced features 133
Making an undiscoverable to other
users 133
Encrypting the content of your
transmissions 134
Changing the default connection 135
Manually creating a virtual Bluetooth COM
port 137
CHAPTER 6
Troubleshooting 142
General operating of the Bluetooth
Utility 142
Using a wireless modem station 145
Using an access point 148
Using a mobile telephone 149
Using a PDA 152
Using a camera 153
Using a Bluetooth Headset 153
FCC Caution 155

1
Introduction
Bluetooth is an open specification for a cutting-edge technology that enables short-range
wireless connections between desktop and laptop computers, personal digital assistants,
cellular phones, printers, scanners, digital cameras and even home appliances — on a
globally available band (2.4GHz) for worldwide compatibility. In a nutshell, Bluetooth
unplugs your digital peripherals and makes cable clutter a thing of the past. Now you can
connect your PDA or PC to Bluetooth™ enabled mobile phone with this Bluetooth™
adapter.ʳ
You can access e-mail & Internet no matter where you are with just a little help from your
Bluetooth™ mobile phone.ʳ
Plus, when you are back in the office, you can hook yourself up to your office network as
well as communicate with other Bluetooth™-enabled devices.
i

2
Chapter1
Supported profiles
(a) Dial-Up Network (DUN)
(b) Fax profile (FAX)
(c) Local Access Profile (LAP)
(d) Serial Port Profile (SPP)
(e) Human Interface Devices (HID)
(f) Hard Copy Replacement Profile (HCRP)
(g) File Transfer Profile (FTP)
(h) Object Push Profile (OPP)
(i) Headset Profile (HSP)
(j) Personal Area Network (PAN)
(k) Basic Imaging Profile (BIP)
(l) Advanced Audio Distribution Profile (A2DP)
(m) A/V Remote Control Profile (AVRCP)
(n) Generic Audio Video Distribution Profile (GAVDP)
1

3
Supported languages
The Bluetooth Stack for Windows supports the following languages.
English
Danish
French
German
Italian
Japanese
Norwegian
Spanish
Swedish
Dutch
Korean
Simplified Chinese
Traditional Chinese
Russian
Finnish
Portuguese (Brazil)
Supported operating systems
The Bluetooth Stack for Windows supports the following operating systems.
Windows 2000 Professional (Service Pack 3 or above)
Windows XP Professional (Service Pack 1 or above)
Windows XP Home (Service Pack 1 or above)
Windows XP Tablet PC Edition
Windows XP Media Center Edition
Windows XP (64bit)
Limitations
(a) External Bluetooth drivers cannot be "signed drivers" to receive Microsoft WHQL logo.
Therefore, Microsoft's "Unsigned driver" warning messages may pop up during the
software installation, Bluetooth headset, mouse or keyboard setup. Please install the
drivers and then follow the on-screen instructions.
(b) On Swedish Windows XP, an error message (error code = 633) may be seen during
dial-up. Please update the operating system to Windows XP Service Pack 2 or refer to
Microsoft knowledge base #831717.
(c) Windows XP fast user switch is not supported. When switching to another user, the
Bluetooth Manager is not launched. Please log off before switching to another user.

4
(d) If "automatic FAX receiving" is enabled on Microsoft FAX manager, and if DUN, FAX,
or LAP profile icon is registered on Bluetooth Settings, and then Bluetooth's "resume from
standby" may take a couple of minutes to turn on.
(e) Before connecting or disconnecting a Bluetooth headset, please exit any voice or
sound-related applications (e.g. Windows Messenger, Windows Media Player). The
audio input and output may not be switched properly if those applications are running.
This same precaution is important prior to system standby, hibernate or shutdown, and
prior to turning off or unpluging the primary Bluetooth device.

5
Chapter2
Setup for Windows 2000/XP
Installing Bluetooth software for Windows
1. Please insert the accompanying CD and the setup menu should launch
automatically. If the setup menu does not launch automatically, use Windows
Explorer to navigate to the appropriate CD-ROM drive and run "setup".
Please select the type of your O/S to start the installation.
2. Please choose the setup language that you want to install.
ʳ
ʳ
ʳ
2

6
3. Please click “NEXT” button to start the installation
3. When the License Agreement screen is displayed, read the License Agreement,
then click the radio button to the left of "I accept the terms in the license
agreement" and then click the “Next“ button.

7
4. Please click “install” to begin the installation.
5. Please click “I accept “ to install the Toshiba stack without showing warnings for
unauthorized drivers from Microsoft.

8
6. During the installation, the system will try to detect your Bluetooth device, please plug
in your Bluetooth device and then click on the “OK” button.
7. Please click “Finish” to complete the installation.
8. You may need to restart for made the software to effect.
.

9
Chapter 3
Basic setting
Methods for registering new devices using the Bluetooth Utility shall now be described.
A Bluetooth mouse shall be connected and set up using [Bluetooth Settings] as an
example.
[Bluetooth Settings] provides two set-up methods: "Express Mode" and "Custom Mode."
xExpress Mode
[Bluetooth Settings] will automatically detect and register services. If several
services (profiles) are supported by the device the service that has been set to the
highest priority shall be selected and registered.
Express Mode is normally recommended for device set-up.
xCustom Mode
After having been detected, the services supported by the device are displayed as
a list, from which you can select the desired function(s).
Custom Mode must be used to set up a device if, for example, you wish to use a
modem station to send a fax (because in Express Mode, the DUN profile will be
automatically selected since it has a higher priority than the FAX profile).
The differences between setting up the same device (a Bluetooth mouse) using Express
Mode and Custom Mode are described on the following pages.
3.1 Express Mode Set-up
3.1.1 Starting Bluetooth Settings
1. Click [Start]Æ[All Programs]Æ[Bluetooth]Æ[Bluetooth Settings].
(Under Windows 2000, click [Start]ĺ[Programs]ĺ[Bluetooth]ĺ[Bluetooth
Settings].)
ʳ
3

10
Note
The same result can be achieved by right-clicking on the Bluetooth icon in the
task tray andʳselecting [Bluetooth Settings] from the menu that appears.
The [Add new Connection Wizard ] window below will appear when other
devices have already been registered.
Please click the mode and click “Next” button to detect Bluetooth devices."
3.1.2 Detecting Bluetooth devices
The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window
will appear.

11
1. Switch the device power ON to make it connectable via Bluetooth.
2. Confirm that [Express Mode] has been selected in the [Add New Connection
Wizard (Welcome to the Add New Connection Wizard)] window, and click on
the [Next] button.
Searching for Bluetooth devices will start.

12
When the device has been detected, the name and address of the device will
appear in the [Add New Connection Wizard (Select Device)] window.
Note
If no device is found, please confirm that the device has been made connectable
via Bluetooth, and click on the [Update] button.
A further device search will be performed.

13
3.1.3 Detecting services
1. Select the device name from [Device List] and click on the [Next] button.
Bluetooth device detection will commence(See it on next page).

14
Note
ƔIf several services (profiles) are supported by the device, the service that has
been set to the highest priority shall be automatically selected and set up in
Express Mode. Please use Custom Mode if you wish to select desired services
manually.
xWhen a service has been detected, a window prompting you to enter the
Bluetooth passkey (PIN code) may appear.(for example , pairing a mobile phone
with a PC). Please enter the passkey and click on the [OK] button.
ƔIf you have not entered your Bluetooth passkey after a certain amount of time
has passed, the connection process will be cancelled for security reasons.
Please perform the passkey entry process again.
2. The paired device will showed on the screen of Bluetooth wizard.

15
3.1.4 Registering settings information
The [Add New Connection Wizard (Completing the Add New Connection Wizard)] window
will appear.
1. Click on the [Finish] button
The [Bluetooth Settings] window will appear.
The icons of the registered devices will appear, and the devices will be ready to
use.

16
3.2 Custom Mode Set-up
3.2.1 Starting Bluetooth Settings
1. Click [Start]Æ[All Programs]Æ[Bluetooth]Æ[Bluetooth Settings].
(Under Windows 2000, click [Start]ĺ[Programs]ĺ[Bluetooth]ĺ[Bluetooth
Settings].)
Note
ƔThe same result can be achieved by right-clicking on the Bluetooth icon in the
task tray andʳselecting [Bluetooth Settings] from the menu that appears.
The [Bluetooth Settings] window below will appear when other devices have
already been registered.

17
Please click the [New Connection] button to open the [Add New Connection Wizard]
window. If no devices have been registered yet, please proceed directly to
"Detecting Bluetooth Devices."
3.2.2 Detecting Bluetooth devices
The [Add New Connection Wizard (Welcome to the Add New Connection Wizard)] window
will appear.
1. Switch the device power ON to make it connectable via Bluetooth.
2. Confirm that [Custom Mode] has been selected in the [Add New Connection
Wizard (Welcome to the Add New Connection Wizard)] window, and click on
the [Next] button.
Searching for Bluetooth devices will start.

18
When the device has been detected, the name and address of the device will
appear in the [Add New Connection Wizard (Select Device)] window.
Note
ƔIf no device is found, please confirm that the device has been made
connectable via Bluetooth, and click on the [Update] button.
ƔA further device search will be performed.