Toshiba E-STUDIO 2303A User manual

Basic Operations Before Use
Troubleshooting
OPEN SIDE COVER
MISFEED E130
Printed in China 6LJ84270000
R150120P7002-TTEC OME150011B0 DP-2303A/2303AM/2803AM Ver02 F 2017-08
©2015, 2017 TOSHIBA TEC CORPORATION All rights reserved
1
2
2
3
1
4
x 10
x 10
5
6
7
This manual describes the components, preparations, basic operations, and troubleshooting for the equipment. Before
using the equipment, read the Safety Information (Printouts). The DVD bundled with the equipment contains the
manuals (PDF le).
Trademarks
Company names and product names in this manual are the trademarks of their respective companies.
12
3
4
5
6
7
1
23
45
6
789
10
Turning on
6
7
8
5
9
4
10
11
1213
3
212120
15
17
14
16
19 18
Control panel
18171615141312111098
7654321
1. Reversing Automatic Document Feeder
(RADF, optional)
2. Platen sheet
3. Original glass
4. Control panel
5. Platen Cover (optional <included as
standard in some regions>)
6. Side cover
7. USB port
8. Bypass tray
9. Automatic Duplexing Unit (ADU, optional)
10. Toner cartridge
11. Front cover
12. Drawer
13. Paper Feed Unit (PFU, optional)
14. Paper exit stopper
15. Receiving tray
16. AC-IN terminal (rear)
17. Power switch
18. Network interface connector
(only for e-STUDIO2303AM/2803AM)
19. USB terminal (4-pin)
20. Scanning area
21. Original scale
1. COPY
2. SCAN
3. USER FUNCTIONS
4. JOB STATUS
5. SETTINGS
6. TEMPLATE
7. ENERGY SAVER
8. DRAWER
9. LCD screen
10. DATA
11. Alert lamp
12. CANCEL
13.
14. OK
15. Digital keys
16. START
17. CLEAR/STOP
18. FUNCTION CLEAR
1
23
4
MULTIFUNCTIONAL DIGITAL SYSTEMS
Quick Guide
Equipment User's Guide: Chapter 1
Toner empty User's Guide: Chapter 6
On Bypass tray
In Side cover
In RADF
Paper misfeed User's Guide: Chapter 6
In PFU
Component Description

Printer
and
scanner
functions
are
available.
TroubleshootingComponent Description
Basic OperationsBefore Use
2
1
1
2
5
3
4
1
2
34
READY
100%
AUTO EXPOSURE
TEXT/PHOTO
1A4
Bypass tray
To set paper size of Drawer
When you load paper in the drawer, a pop-up window appears.
Follow the instructions and set the paper size. (When the "POP
UP" function is set to “ENABLE”.)
Drawer
Loading paper User's Guide: Chapter 1
Installing the driver requires the administrator authority.
For Windows 7, Windows 8.1, Windows Server 2008 R2,
Windows Server 2012 , or Windows Server 2016, use the
installer.
Note when installing from installer
• Close all running applications.
• If the installer does not automatically start, double-
click “Setup.exe” in the DVD.
Using installer
1. Close all running applications.
2. Make sure that the equipment is turned on.
3. Insert the DVD into the computer.
4. Double-click “Setup.exe”.
5. Follow the on-screen instructions.
Using Plug and Play
1. Turn on the equipment.
2. Follow the on-screen instructions.
Connecting computer
Before installing the drivers, connect the equipment and
the computer with a USB cable or Network interface cable*.
* Only for e-STUDIO2303AM/2803AM
Driver installation Software Installation Guide: Chapter 2
Scan to USB Memory
1. Place the original(s).
2. Press [SCAN].
3. Connect the USB storage device to the equipment and
wait a few seconds.
4. Press or to select “USB”, and then press [OK].
5. Press to make the scan settings as required.
6. Press [START] to scan your documents.
2
1
1. Select [Print] from the application's [File] menu.
2. Select your printer
1
, and
then click [Preferences]
2
.
3. Make print option settings, and then click [OK].
4. Click [Print] ([OK]).
3. Enter the number of copies
with the digital keys
1
, and
then press [START]
2
to copy.
To stop copying
Press [CLEAR/STOP]
Shortcut keys
Press : “ORIGINAL MODE”
Press : Europe and the Americas “EXPOSURE”,
Except Europe and the Americas “ID
CARD”
To reset settings and LCD screen after copying
Press [FUNCTION CLEAR]
2. Press [COPY] and make the
copy settings.
RADF
1. Place the original(s). Original glass
Copier User's Guide: Chapter 2
Printer User's Guide: Chapter 3 Scanner User's Guide: Chapter 4
TWAIN Scan
1. Place the original(s).
2. Launch a TWAIN-compliant application.
3. Select the device from the application’s [File] menu.
4. Select the menu to scan from the application’s [File]
menu.
5. Make the scan settings, and then click [Scan].
Registering a template
1. Press [COPY] or [SCAN].
2. Make settings for the functions to register as a
template.
3. Press [TEMPLATE].
4. Press or to select “REGISTRATION”, and then press .
5. Press or to select a template, and then press [OK].
Templates User's Guide: Chapter 2, 4
Recalling a template
1. Press [COPY] or [SCAN].
2. Press [TEMPLATE].
3. Press or to select “RECALL”, and then press .
4. Press or to select the template, and then press
[OK].