Toshiba Equium 7100D User manual

EQUIUM 7100D Product Specifications
Toshiba America Information Systems Inc. ("TAIS") shall not be liable for damages of any kind for use of this information, which is subject to change
without notice. Copyright 2000 TAIS Equium 7100D.doc Rev. 7 03/22/00 nmm. Page 1 of 4
PLATFORM
SERIES NAME EQUIUM 7100D
PART NUMBER As Listed: See Configuration Page
PROCESSOR Note: Processors with 100MHz Front Side Bus require matched memory.
Intel Pentium

III Yes
Available processor speeds 500, 550 or 600MHz
Integrated Coprocessor Yes
MMX support Yes
ECC support Yes
Processor Cache (L1) Capacity 32KB: (16KB code; 16KB data)
Bus Speed 100MHz Front Side Bus
LEVEL 2 (L2) CACHE Yes: 512KB Pipeline Burst SRAM Integrated into CPU
Data Bus Width/Address Bus Width 64-bit/64-bit
Local Clock Bus Speed Half of the Processor clock
Intel Celeron

Yes
Available processor speeds 433MHz
Integrated Coprocessor Yes
MMX support Yes
ECC support Yes
Processor Cache (L1) Capacity 32KB: (16KB code; 16KB data)
Bus Speed 66MHz Front Side Bus
LEVEL 2 (L2) CACHE Yes: 128KB Pipeline Burst SRAM Integrated into CPU
Data Bus Width/Address Bus Width 64-bit/64-bit
Local Clock Bus Speed Half of the Processor clock
SYSTEM BOARD
Form Factor NLX
Chipset 82440BX
Down Components
I/O Controller Yes
Graphics Controller ATI 3D Rage Pro 2X AGP
Audio Controller Crystal Audio CS4235
SYSTEM ARCHITECTURE
Form Factor NLX Riser Adapter (3-PCI and 1-PCI/ISA)
PCI BUS (V2.1): (32-bit, 33mhz) Yes: 3-Half-length slot
ISA BUS: (16-bit, 8MHz) Yes: 1-Shared PCI/ISA full-length slot
HARDWARE MONITORING (DMI ASIC) Yes: LM78 (Voltage, Temperature, Fan Speed, and Chasis Intrusion)
MEMORY: SDRAM
Type 168-pin SDRAM DIMM’s with gold-plated contacts, unbuffered
Available Standard Configurations (x*32MB) 32MB, 64 MB or 128MB (As Listed: See Configuration Page)
Maximum 256 MB
ECC/Parity Support Optional (No parity standard)
Local Clock Bus Speed 100 MHz
Socket type: (2) 168-pin gold plated DIMM sockets: Accepts 8/16/32/64/128MB memory
BIOS (2Mbit FLASH EEPROM, 256KB) Yes
PC-98 Ready Yes
Multi-Boot Yes
PCI Add-in card auto-config Yes
PnP 1.0a Support Yes
Advanced Power Management 1.2 (APM) Yes
DMI 2.0 Compliant Yes
UDMA - 33 Yes
POST Yes
Machine ID Yes
DPMS Support Yes
Toshiba Secure Sleep Yes

EQUIUM 7100D Product Specifications
Toshiba America Information Systems Inc. ("TAIS") shall not be liable for damages of any kind for use of this information, which is subject to change
without notice. Copyright 2000 TAIS Equium 7100D.doc Rev. 7 03/22/00 nmm. Page 2 of 4
SERIES NAME EQUIUM 7100D
PART NUMBER As Listed: See Configuration Page
EXTERNAL INTERFACES All ports color coded for easy installation
One 9-Pin Serial Yes (NS16C550 UART compatible)
Two Universal Serial Bus ports2Supports 2 USB peripherals without external hub
One 25-Pin Parallel Yes: (Multimode bidirectional EPP/ECP compatible)
One 15-Pin RGB (SVGA video) Yes
One (PS/2) Mouse Port Yes
One (PS/2) 104 Keyboard Yes
One External Microphone jack Yes
Line-out (3.5mm mini jack, stereo, 0.7V rms) Yes
AC IN (Standard 2 prong ) Yes
VIDEO
Video Memory: SGRAM 4MB expandable to 8MB (via SO-DIMM socket)
Speed 40ns
Data Bus Width 64-bit
Clock Speed 100 MHz
Graphic Controller
Standards Supported DPMS Power Managment, DDC1, DDC2B+, PnP Compliant
Local Bus support Yes: PCI Bus (33 Mhz, 32-bit)
Controller Chip ATI 3D Rage Pro 2X (AGP -- Accelerated Graphics Port)
Connected Bus type AGP 1.0
Bus Speed 133 MHz
64-bit BitBLT Engine Yes
2D Supported Features BitBLT, Hardware Cursor (up to 64 x 64 x 2), DirectDraw,
Retangle Fill,Line Draw, Polygon Fill, Panning/Scrolling, Bit Masking,
Monochrome Expansion, Scssoring and full ROP support
3D Supported Features Yes: supports 24-bit color
AGP Support Yes: (133mhz with sidebands and pipelining 64-bit PCI Graphics Accelerator)
Triangle Setup Yes
Modeling Fogging, lighting
Shading Gouraud shading
Rendering Texture mapping: Bilinear,Trilinear, Anti-aliasing, MIP mapping, Z-Buffering
Alpha-blending Yes
Direct3D support Yes
QuickDraw 3D RAVE support Yes
Open GL support Yes
Digital Video Accelerator
YUV Color Space Conversion Yes: Off-loads conversion from CPU for higher performance full motion video
Without compromising picture quality or frame rate.
Scaling/ Interpolation Yes: vertical & horizontal
Direct Video, DirectMPEG Yes
Motion Compensation Yes
SUPPORTED VIDEO RESOLUTIONS Colors/ Refresh Rate
(Non-interlaced unless otherwise specified) 4MB Memory
640 x 480 32-bit 160 Hz
800 x 600 32-bit 160 Hz
1024 x 768 32-bit 140 Hz
1152 x 864 32-bit 100 Hz
1280 x 1024 24-bit (16.7M) 85 Hz
SOUND SYSTEM
Chipsets: Crystal CS4235
Compatibility Sound Blaster Pro & Windows Sound System
FM Synthesis Yes (Yamaha OPL3 compatible)
16-bit stereo audio full duplexed Yes
SRS13D sound support Yes
Built-in microphone No
1. Sound Retrieval Systemcreates a 3D sound image using two conventional speakers, by retrieving pre-recorded spatial
information and restoring it to the original 3D sound field.

EQUIUM 7100D Product Specifications
Toshiba America Information Systems Inc. ("TAIS") shall not be liable for damages of any kind for use of this information, which is subject to change
without notice. Copyright 2000 TAIS Equium 7100D.doc Rev. 7 03/22/00 nmm. Page 3 of 4
SERIES NAME EQUIUM 7100D (PLATFORM con.)
PART NUMBER As Listed: See Configuration Page
CHASSIS "FULL SIZE DESKTOP DESIGN"
SERIES NAME EQUIUM 7100D
PART NUMBER As Listed: See Configuration Page
EXPANSION BAY TOTAL AVAILABLE CONFIGURED
Internal3.5” 2 1 1 (HDD)
5.25” 0 0 0
External 3.5” 1 0 1 (FDD)
As Listed: See Configuration Page 5.25” 211(CD-ROM)
EXPANSION SLOTS TOTAL AVAILABLE CONFIGURED
PCI: Half-Length 3 3 0
PCI/ISA Shared: Full-length 1 1 0
POWER SUPPLY (200W)
Input (Voltage/Frequency) 115-230V; 50-60Hz, Switch Selectable
SUPPORTED SAFETY STANDARDS
US/Canada UL 1950 - CSA950-95, 3rd Edition, 7/28/95
CSA22.2 No.950-93, 3rd Edition
ICES-003, Issue 2
FCC Class B
Europe EN 60950 w/Nordic deviation
CE Mark
EN61000-4-2 (IEC 801-2), EN61000-4-3 (IEC 801-3), EN61000-4-4
TUV/GS Mark
Japan EN61000-4-5, VCCI Class 2 (ITE)
CERTIFICATIONS: Windows 95 & Windows NT logo, Novell Client, Energy Star
HARDWARE COMPLIANT: PC97, PC98, Wired For Management (WfM), Year 2000
SECURITY
Hardware Chasis Lock (key mechanism/padlock) -- Lock not included
Keyboard/Mouse Lock Secure sleep
Miscellaneous Screen blank
Password Support Power-on, Supervisor/Administrator, User, Sleep
DIMENSIONS
Measurements 17.32”W x 16.34”D x 5.12”H
Weight 24.5 lbs.
BUNDLED SOFTWARE OPTIONS: Windows 95, Windows 98 or Windows NT Workstation v4.0; ); Online User’s Guide
Intel LanDesk Client Manager 3.1; Microsoft Internet Explorer 4.0.; Expert Intelligent Help(SystemWizard v1.4
CD’s Included: Backup CD, Toshiba Configuration Builder (Recovery) CD
WARRANTY: 3 Yr. Parts/One Yr. Labor (First Yr. On-site), Years 2 & ;3 Parts only; 24 x 7 Dedicated technical support
ENVIRONMENTAL SPECIFICATIONS Operating Non-operating
Temperature: 50°F (10°C) to 95°F (35°C) -4°F (-20°C) to 140°F (60°C)
Packaged: -30°C to 70°C -- --
Relative Humidity: 30%to 80%non-condensing 10%to 90%non-condensing
Shock: 10G; 1.5G w/CD-ROM installed 60G; 10G w/CD-ROM installed
Vibration (5~150Hz f/30 minutes, each axis) 0.3G 0.6G
Packaged: 1.0G -- --

EQUIUM 7100D Product Specifications
Toshiba America Information Systems Inc. ("TAIS") shall not be liable for damages of any kind for use of this information, which is subject to change
without notice. Copyright 2000 TAIS Equium 7100D.doc Rev. 7 03/22/00 nmm. Page 4 of 4
SERIES NAME EQUIUM 7100D
PART NUMBER As Listed: See Configuration Page
COMPONENT
STORAGE
FDD 3.5” 1.44MB Floppy Disk Drive
HDD (3.5” Half-height Enhanced IDE) As Listed: See Configuration Page
Type SMART, Ultra-DMA
Capacity options 4GB, 6.4GB, 8GB, 10GB, 13.6GB, 17.2GB or 20.5GB (See Configuration Page)
RPM 5400
Buffer 256KB
Access Time <9.7 msec
Ultra DMA support Yes
Burst Data Transfer Rate Ultra DMA Mode2 (33.0MB/sec); PIO Mode 4 (16.7MB/sec)
Certifications SMART, UDMA-33, Energy Star
Controller Integrated (ATA-4)
CD-ROM:As Listed: See Configuration Page
Available options No CD-ROM, 40X CD-ROM or 4X DVD-ROM (DVD-ROM is for storage only)
CD-ROM speed 40X
Interface ATAPI ( Enhanced IDE )
Random Access Time 80ms
Sustained Data Transfer Rate 2100~6000KB/Sec(14X~40X), average over 28X
Standards supported MPC Level 2 & 3
Supported Disk Formats SO9660 Data Discs, CD-ROM(Mode 1 & Mode 2), Mixed Mode (Audio Combined
CD-ROM Disc), CD-ROM/XA(Mode2, Form 1 & Form 2), CD-I/FMV, Video CD,
CD-DA, Photo-CD(Single & Multisession), Karaoke CD, CD Extra, CD-RW (Read
Only)
DVD-ROM (Toshiba SD-M1202) 4X speed, Region 1 (DVD-ROM is for storage only)
Interface ATAPI ( Enhanced IDE ) with 256KB Buffer
Random Access Time 160 ms
Sustained Data Transfer Rate 2,704 KB/sec to 6,534KB/sec
Supported Disk Formats Multisession Photo-CD, CD-Extra, CD-ROM XA, CD-I, Video CD, CD-G,
CD-I Ready, MPC-3 Compliant, Red Book, Yellow Book, Plug and Play
ETHERNET SUPPORT As Listed: See Configuration Page
Available options Intel EtherExpress PRO/100B PCI, 3Com Fast EtherLink XL 10/100, or None
Chipset i82558 (Specs not available for 3COM Option)
Support Network 100Base-TX, 10Base T
Port RJ 45 (with Connection Status LED and Ethernet Speed LED)
Wake on LAN Yes
KEYBOARD (PS/2)
Two Keyboard Options available Value Keyboard Option
Enhanced 104-key keyboard Yes
Windows 95 support Yes
3.5mm Travel Yes
12 dedicated function keys Yes
Numeric keypad Yes
Keyboard tilt Yes
Detatchable palm rest No
Scroll Lock, CapsLock, NumLock Indicators Yes
POINTING DEVICE - PS/2 Mouse Yes: 2 Button with 6 foot cable