Toshiba Regza 42XV635D User manual

XV6**D Digital
Series
ZV6**D Digital
Series

2
English
Contents
INSTALLING YOUR TV
Safety Precautions ..................................................4
Installation and important information ....................5
The remote control .................................................6
Inserting batteries and effective range of the
remote ..........................................................7
CONNECTING YOUR TV
Connecting external equipment ..............................8
Connecting an HDMI™ or DVI device to the HDMI
input ...................................................................9
To connect an HDMI device ..............................9
To connect a DVI device ...................................9
REGZA-LINK connection .......................................10
Connecting a computer ........................................11
To connect a PC to the RGB/PC terminal ........11
To connect a PC to the HDMI terminal ............11
Controls and input connections .............................12
Switching on ..................................................12
Using the remote control ...............................12
Using the controls and connections ................12
SETTING UP YOUR TV
Startup Application ...............................................13
Quick Setup ...................................................13
Ant/Cable In (if available) ..............................14
Auto Tuning ...................................................15
ATV Manual Tuning ..............................................15
Tuning ...........................................................15
Skip ...............................................................17
Sorting positions ............................................17
DTV Manual Tuning ..............................................18
Manual Tuning ..............................................18
Manual Tuning for DVB-C ..............................18
DTV Settings .........................................................18
Channels .......................................................18
Auto Channel Update ....................................19
DVB Character Set .........................................19
Analogue switch-off .....................................19
Location setting .............................................19
CONTROLS AND FEATURES
General controls ...................................................20
Selecting positions .........................................20
The Time Display – analogue only ................20
Stereo and Bilingual transmissions .................20
Quick Menu ..................................................20
Sound controls .....................................................21
Volume controls and mute sound ...................21
Dual .............................................................21
Bass, Treble and Balance ...............................21
Advanced Sound Settings ..............................21
Dolby Volume®.............................................21
Dynamic Range Control .................................21
Audio Level Offset .........................................22
Headphone Settings ...................................... 22
Audio Description ..........................................22
Widescreen viewing .............................................23
Picture controls ....................................................25
Picture Position ..............................................25
Picture Mode .................................................25
Picture preferences ........................................25
Reset .............................................................26
3D Colour Management ................................26
Base Colour Adjustment ................................26
Colour Temperature ......................................26
Auto Brightness Sensor Settings .....................27
Active Backlight Control .................................27
Black/White Level ..........................................27
Static Gamma ...............................................27
MPEG NR – Noise Reduction ..........................27
DNR – Digital Noise Reduction .......................27
Resolution+ ..................................................28
Active Vision M100/200 ................................28
Film Stabilization ...........................................28
Expert Mode ..................................................28
Resetting the advanced picture settings ..........28
Control Visualization .....................................29
Automatic Format (Widescreen) .....................29
4:3 Stretch ....................................................29
Blue Screen ...................................................29
Side panel adjustment ...................................29
Picture still .....................................................29
Using the Media Player ........................................30
To select the Auto Start function .....................30
To open Media Player ....................................30
Viewing photo files ........................................31
Viewing movie files (only for USB devices) ......32
Playing music files (only for USB devices) ........33
Using the Photo Frame feature .............................34
To open Photo Frame ....................................34
Setting the features .......................................34
Other features .....................................................36
Panel lock .....................................................36
TOSHIBA Illumination ....................................36

3
English
The timers ............................................................36
Programme Timers – digital only ...................36
On Timer .......................................................37
Sleep Timer ...................................................37
Digital on-screen information and Programme
Guide ................................................................38
Information ...................................................38
Guide ............................................................39
Genre selection/searching .............................39
Digital settings – parental control ........................40
Setting the PIN ..............................................40
Parental Setup ...............................................40
Digital settings – Channel Options .......................41
Channel List ..................................................41
Skip channels ................................................41
Locking channels ...........................................41
Digital settings – other settings .............................42
Subtitles ........................................................42
Audio languages ...........................................42
Common Interface .........................................42
Software Upgrade ................................................43
Auto Upgrade ................................................43
Searching for New Software ...........................43
System Information and Reset TV ..........................43
System Information ........................................43
Reset TV ........................................................43
PC Settings ...........................................................44
Horizontal and Vertical Position .....................44
Clock Phase ...................................................44
Sampling Clock .............................................44
Reset .............................................................44
Input selection and AV connections .......................45
Input selection ...............................................45
External input skip .........................................45
INPUT signal selection ...................................45
Woofer setting ...............................................45
PC Audio .......................................................46
HDMI 1 Audio ...............................................46
HDMI Settings ...............................................46
Digital Audio Output ......................................46
Using REGZA-LINK ...............................................47
Enable REGZA-LINK .......................................47
TV Auto Power On .........................................47
Auto Standby .................................................47
Amplifier Control ...........................................47
Speaker Preference ........................................47
REGZA-LINK input source selection ................47
REGZA-LINK playback device control ..............48
REGZA-LINK one touch play ...........................48
REGZA-LINK system standby ..........................48
REGZA-LINK system audio control ..................48
REGZA-LINK PC link ......................................48
TEXT SERVICES
Text services .........................................................49
Selecting modes ............................................49
Text information ............................................49
Navigating pages using Auto .........................49
Navigating pages using LIST ..........................49
Control buttons .............................................50
PROBLEM SOLVING
Questions and Answers ....................................51
INFORMATION
Notes ...................................................................54
Information ..........................................................55
Specifications and accessories ..............................57

4
English
INSTALLING YOUR TV
Safety Precautions
This equipment has been designed and manufactured
to meet international safety standards but, like any
electrical equipment, care must be taken to obtain the
best results and for safety to be assured. Please read
the points below for your own safety. They are of a
general nature, intended to help with all electronic
consumer products and some points may not apply to
the goods you have just purchased.
Leave more than 10cm clearance around the television
to allow adequate ventilation. This will prevent
overheating and possible damage to the television.
Dusty places should also be avoided.
Damage may occur if the television is left in direct
sunlight or near a heater. Avoid places subject to
extremely high temperatures or humidity. Place in a
location where the temperature remains between 5°C
(41°F) min. and 35°C (94°F) max.
The mains supply required for this equipment is 220-
240v AC 50/60Hz. Never connect to a DC supply or
any other power source. DO ensure that the television
is not standing on the mains lead. Use only the
supplied lead.
DO NOT cut off the mains plug from this equipment,
this incorporates a special Radio Interference Filter, the
removal of which will impair its performance.
IF IN DOUBT PLEASE CONSULT A COMPETENT
ELECTRICIAN.
DO read the operating instructions before you attempt
to use the equipment.
DO ensure that all electrical connections (including the
mains plug, extension leads and inter-connections
between pieces of equipment) are properly made and
in accordance with the manufacturers’ instructions.
Switch off and withdraw the mains plug before making
or changing connections.
DO consult your dealer if you are ever in doubt about
the installation, operation or safety of your equipment.
DO be careful with glass panels or doors on
equipment.
DO NOT obstruct the ventilation openings of the
equipment with items such as newspapers, tablecloths,
curtains, etc. Overheating will cause damage and
shorten the life of the equipment.
DO NOT allow electrical equipment to be exposed to
dripping or splashing or objects filled with liquids, such
as vases, to be placed on the equipment.
DO NOT place hot objects or naked flame sources,
such as lighted candles or nightlights on, or close to
equipment. High temperatures can melt plastic and
lead to fires.
DO NOT use makeshift stands and NEVER fix legs with
wood screws. To ensure complete safety, always fit the
manufacturers’ approved stand, bracket or legs with
the fixings provided according to the instructions.
DO NOT leave equipment switched on when it is
unattended, unless it is specifically stated that it is
designed for unattended operation or has a standby
mode. Switch off by withdrawing the plug, make sure
your family know how to do this. Special arrangements
may need to be made for people with disabilities.
DO NOT continue to operate the equipment if you are
in any doubt about it working normally, or it is
damaged in any way – switch off, withdraw the mains
plug and consult your dealer.
WARNING – excessive sound pressure from
earphones or headphones can cause hearing loss.
ABOVE ALL – NEVER let anyone, especially
children, push or hit the screen, push anything
into holes, slots or any other openings in the
case.
NEVER guess or take chances with electrical
equipment of any kind – it is better to be safe
than sorry.
Air Circulation
Heat Damage
Mains Supply
Do
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL
EXPOSE DANGEROUS AND 'LIVE' PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING
DEVICE AND THEREFORE SHOULD BE READILY
OPERABLE.
Do not

5
INSTALLING YOUR TV
English
Installation and important information
Locate the television away from direct sunlight and strong
lights, soft, indirect lighting is recommended for
comfortable viewing. Use curtains or blinds to prevent
direct sunlight falling on the screen.
Place the TV on a stable, level surface that can support the
weight of the TV.
In order to maintain stability and
prevent it falling over, secure the TV to the level
surface using the strap located under the table top
stand, or, to a wall using a sturdy tie to the clip on
the back of the table top stand.
The LCD display panels are manufactured using an
extremely high level of precision technology, however
sometimes some parts of the screen may be missing
picture elements or have luminous spots. This is not a sign
of a malfunction.
Make sure the television is located in a position where it
cannot be pushed or hit by objects, as pressure will break
or damage the screen, and that small items cannot be
inserted into slots or openings in the case.
Cleaning the screen and cabinet…
Turn off the power, clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any
proprietary polishes or solvents on the screen or cabinet as this may cause damage.
The digital reception function of this television is only effective in the countries listed in the “COUNTRY” section of
the “SETUP” menu. Depending on country/area, some of this television's functions may not be available. Reception
of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays,
video games, on screen menus, etc. are left on the television screen for any length of time they could become
conspicuous, it is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3
outlines, this is not a defect of the LCD TV and is not covered under the manufacturers warranty. Regular use of
other size modes (eg: Superlive) and varying the “side panel” brightness (if available on the model) will prevent
permanent retention.
Where to install
Please take note
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i) fire;
ii) earthquake;
iii) accidental damage;
iv) intentional misuse of the product;
v) use of the product in improper conditions;
vi) loss and/or damage caused to the product whilst in the possession of a third party;
vii) any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s
manual;
viii) any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with
associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited
to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or
misuse of the product.
NOTE: A Toshiba wall bracket or stand, where available, must be used.
Stand clip
‘P’ Clip
‘P’ Clip
Sturdy tie (as short as possible)
Fixing strap
Stand style is dependent
on model
Fixing strap
‘P’ Clip
‘P’ Clip
Stand clip
Sturdy tie (as short as possible)

6
INSTALLING YOUR TV
English
The remote control
Simple at-a-glance reference of your remote
control.
1 For On/Standby mode (T/R/D)*
2 To select device mode (T/R/D)
3 Number buttons (T/R/D)
4 Switch the Audio Description On/Off (T)
5 To select external input sources (T)
To select line input (R/D)
6 To alter the TV volume (T/R/D)
7 To mute the TV sound (T/R/D)
8 To access Quick Menu (T)
9 To change programme positions (T/R)
To change text pages (T)
10 To display the digital on-screen Programme Guide (T)
11 To exit Menus (T)
12 When using menus the arrows move the cursor on the
screen up, down, left or right.
Q to confirm your selection
(T/R/D)
13 To display on-screen information (T/R/D)
To access index page in Text mode (T)
14 To return to previous Menu (T/R/D)
15 Colour buttons Text and interactive service control
buttons (T)
ROOT To display Root menu (R)
CONTENTS To display Contents menu (R)
TOP To access Top Menu (R/D)
DVD DVD Menus (R/D)
16 s Stereo/bilingual transmissions (T)
17 SUBTITLE Digital Subtitles or Analogue TEXT Subtitle
pages if available (T)
SET UP To access Setup menu (R/D)
18 Widescreen viewing (T/R/D)
19 To call up text services (T)
20 When in TV mode:
MENU
On-screen Menus
ATV/DTV To switch between ATV (analogue television)
and DTV (digital television)
LIST To switch between TV and Radio programmes
when in digital mode
r Picture still
D Analogue time display
When in Text mode:
A To reveal concealed text
B To hold a wanted page
C To enlarge text display size
D To select a page whilst viewing a normal picture
When using the Programme Guide:
Z - 24 hours
z + 24 hours
CC - 1 page
cc + 1 page
REGZA-LINK or DVD mode:
press V to EJECT
press
v to STOP
press
c to PLAY
press
W / w to PAUSE/STEP
press
Z to SKIP-REWIND
press
CC to REWIND
press
cc to FAST FORWARD
press
z to SKIP-FORWARD
* T=TV mode, R=REGZA-LINK mode, D=DVD mode
1
7
8
9
11
12
14
18
19
20
5
2
3
4
6
10
13
15
16
17

7
INSTALLING YOUR TV
English
Remove the back cover to
reveal the battery compartment
and make sure the batteries are
inserted the right way round.
Suitable battery types for this
remote are AAA, IEC R03 1.5V.
Do not combine a used, old
battery with a new one or mix
battery types. Remove dead
batteries immediately to prevent acid from leaking into the
battery compartment. Dispose of them in accordance with
instructions on page 54 of this manual.
Warning: batteries
must not be exposed to excessive heat such as sunshine, fire or
the like.
The performance of the remote control will deteriorate beyond
a distance of five metres or outside an angle of 30 degrees
from the centre of the television. If the operating range
becomes reduced the batteries may need replacing.
Inserting batteries and effective range of
the remote

8
English
CONNECTING YOUR TV
Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
Aerial cables: - - - - - - - - - - - - - - - - - - - - - -
Connect the aerial to the socket on the rear of the television.
If you use a decoder* and/or a media recorder it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the video recorder
IN / OUT socket to the television.
Connect the decoder
TV socket to the television. Connect the
media recorder
SAT socket to the decoder MEDIA REC . socket.
Before running
Auto Tuning , put your decoder and media
recorder to
Standby .
The phono sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
The Digital Audio Output socket enables the connection of a
suitable surround sound system.
NOTE: this output is always
active
.
HDMI™ (High-Definition Multimedia Interface) is for use with
a DVD decoder or electrical equipment with digital audio and
video output.
For acceptable video or PC signal formats through the HDMI
terminals, see page 56.
NOTE: Although this television is able to connect to HDMI
equipment it is possible that some equipment may not operate
correctly.
A wide variety of external equipment can be connected
to the back of the television; therefore, the relevant
owners manuals for
all additional equipment must be
referred to for exact instructions.
We recommend SCART 1 for a decoder and SCART 2 for a
media recorder.
If connecting S-VIDEO equipment, set the
INPUT for EXT 2 .
See
page 45 .
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press
o to select between DTV , EXT 1 , EXT 2 , EXT 3 ,
HDMI 1 , HDMI 2 , HDMI 3 , HDMI 4 , PC or ATV .
If
r button is pressed while viewing DTV mode, the picture
on your screen and the SCART output will become a still
picture.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
The SCART output will also be muted in EPG mode.
COMPONENT VIDEO INPUT (EXT 3)
HDMI™ INPUT
SOCKETS
SCART 2 (EXT 2)
FIXING STRAP
SCART 1 (EXT 1)
decoder*
media recorder
*a decoder could
be Digital Satellite or
any other compatible
decoder.
POWER switch
OPTICAL DIGITAL AUDIO OUTPUT
Illustration represents 42XV635D.
Antenna/Cable
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks
of Dolby Laboratories.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
INSTAPORT™ and INSTAPORT logo are trademarks of Silicon Image, Inc.
in the United States and other countries.

9
CONNECTING YOUR TV
English
Connecting an HDMI™ or DVI
device to the HDMI input
The HDMI input on your television receives digital
audio and uncompressed digital video from an
HDMI source device, or uncompressed digital video
from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) programme material in digital
form from EIA/CEA-861-D–compliant
[1]
consumer electronic
devices (such as a set-top box or DVD player with HDMI or DVI
output). For acceptable video signal formats, see page 56.
NOTE:
• Some early HDMI equipment may not work properly with
your latest HDMI TV, due to the adoption of a new standard.
Please unplug your HDMI cable first and then try setting the
following options (
Lip Sync, INSTAPORT™ ) to “ Off ”. Your
early HDMI source should operate properly with your
television. See page 46.
• Supported Audio format: Linear PCM, sampling rate 32/
44.1/48kHz.
Connect an HDMI cable (type A connector) to the HDMI
terminal.
For proper operation, it is recommended that you use an HDMI
cable with the HDMI Logo ( ).
• If your HDMI connection is capable of 1080p and/or your
television is capable of refresh rates greater than 50Hz, you
will need a Category 2 cable. Conventional HDMI/DVI cable
may not work properly with this mode.
• HDMI cable transfers both video and audio. Separate
analogue audio cables are not required (see illustration).
• See “HDMI 1 Audio” on page 46.
The HDMI 4 terminal is located on the side of the television.
To view the HDMI device video, press the
o button to select
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.
Connect an HDMI-to-DVI adapter cable (HDMI type A
connector) to the HDMI 1 terminal and audio cables to the PC/
HDMI1 (AUDIO) socket (see illustration).
• The recommended HDMI-to-DVI adapter cable length is 6.6
ft (2m).
• An HDMI-to-DVI adapter cable transfers video only.
Separate analogue audio cables are required.
• See “HDMI 1 Audio” on page 46.
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is
recommended that you follow these procedures:
• When turning on your electronic components, turn on the
television first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the television.
To connect an HDMI device
HDMI OUT
VIDEO AUDIO
LR
R
L
OUT
IN
HDMI cable
HDMI device
To connect a DVI device
DVI /HDCP
OUT
VIDEO AUDIO
LR
R
L
OUT
IN
HDMI-to- DVI
adapter Cable
Audio cable for HDMI to
television connection
(not supplied)
DVI device
[1] EIA/CEA-861-D compliance covers the transmission of uncompressed
digital video with high-bandwidth digital content protection, which is
being standardized for reception of high-definition video signals. Because
this is an evolving technology, it is possible that some devices may not
operate properly with the television.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.

10
CONNECTING YOUR TV
English
REGZA-LINK connection
You can control the basic functions of connected audio/video devices using the televisions remote control
if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and
operations, see pages 47–48.
For the setup shown above, you will need three HDMI cables
(see page 9).
NOTE:
• If several devices are connected, the REGZA-LINK feature
may not operate properly.
• For proper operation, it is recommended that you use HDMI
cables with the HDMI Logo ( )
• The HDMI 4 terminal is located at the side of the television.
• This function is available with one PC and one AV amplifier.
It may not operate properly when a PC connected via an AV
amplifier.
Before controlling the device(s):
• After completing the above connections, set the REGZA-LINK
Setup menu as you desire (see page 47).
• The connected devices must also be set. For details, see the
operation manual for each device.
• The REGZA-LINK feature uses CEC technology as regulated
by the HDMI standard.
• This feature is limited to models incorporating Toshiba’s
REGZA-LINK. However, Toshiba is not liable for those
operations. Refer to individual instruction manuals for
compatibility information.
VIDEO AUD IO
LR
R
L
OUT
IN
HDMI OUTHDMI IN
HDMI OUT
VIDEO AUD IO
LR
R
L
OUT
IN
HDMI OUT
VIDEO AUD IO
LR
R
L
OUT
IN
AV amplifier
Playback device
Playback device

11
CONNECTING YOUR TV
English
Connecting a computer
With either an RGB/PC or an HDMI connection, you
can watch your computer’s display on the television
and hear the sound from the televisions speakers.
When connecting a PC to the RGB/PC terminal on the
television, use an analogue RGB (15-pin) computer cable and
a PC audio cable for the PC/HDMI1 (AUDIO) socket. Select
PC
from the
PC/HDMI 1 Audio options in the AV Connection
menu located in the
SETUP menu.
To use a PC, set the monitor output resolution on the PC before
connecting it to the television. For acceptable PC signal
formats, see page 55.
To display the optimum picture, use the PC setting feature (see
page 44).
NOTE:
• The PC audio input terminal on the television is shared with
the HDMI 1 analogue audio input terminal (see page 46).
• Some PC models cannot be connected to this television.
• An adapter is not needed for computers with a compatible
mini D-sub15-pin terminal.
• Depending on the DVD’s title and the specifications of the PC
on which you are playing the DVD-Video, some scenes may
be skipped or you may not be able to pause during multi-
angle scenes.
• A band may appear at the edges of the screen or parts of the
picture may be obscured. This is due to scaling of the picture
by the set, it is not a malfunction.
• When PC input mode is selected some of the television’s
features will be unavailable e.g.
Manual Settings in the
SETUP menu, Colour , Tint , Sharpness and Black/White
Level
in the PICTURE menu.
• If connecting a certain PC model with a unique PC signal, the
PC signal may not be detected correctly.
When connecting a PC to the HDMI terminal on the television,
use an HDMI-to-DVI adapter cable and an analogue audio
cable.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). A separate analogue cable is not necessary
(see page 9).
For acceptable PC and video signal formats, see page 56.
NOTE:
• The edges of the images may be hidden.
• If connecting a certain PC model with a unique PC signal, the
PC signal may not be detected correctly.
To connect a PC to the RGB/PC terminal
the back of your television
Computer
Audio cable for PC to
television connection
(not supplied)
Conversion
adaptor if required
(not supplied)
Mini D-sub
15 pin connector
RGB PC cable
(not supplied)
To connect a PC to the HDMI terminal
the back of your television
Computer
Audio cable
for PC to
television
connection
(not supplied)
HDMI-to-DVI
adapter cable

12
CONNECTING YOUR TV
English
Controls and input connections
A wide variety of external equipment can be connected to the input sockets on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions
.
If the RED LED is unlit, check that the mains plug is connected
to the power supply and press the
! (POWER) button on the
left side of the television to switch the television on. If the
picture does not appear, press
1 on the remote control, it may
take a few moments. The GREEN LED will be lit.
To put the television into Standby, press
1 on the remote
control. To view the television, press
1 again. The picture may
take a few seconds to appear.
Press
MENU on the remote control to see the menus.
The menu appears as a list of five topics. As each symbol is
selected by pressing
C or c on the navigation ring on the
remote control, its respective options will appear below.
NOTE: The same menu is displayed in DTV (Digital TV) and
ATV (Analogue TV) modes; however, some items are greyed
out in each case.
To use the options, press
B and b on the remote control to
move up and down through them and
Q , and then, press C
or
c to select the required choice. Follow the on-screen
instructions. The functions of each menu are described in
detail throughout the manual.
To alter the volume press –
2 +.
To alter the programme position press
b p B .
Press
MENU and I , i , U or u to control the sound and picture
options.
Press
MENU to finish.
An S-video cable provides better picture performance than a
composite video cable. If you connect an S-video cable to
EXT 3 , be sure to disconnect the standard (composite) video
cable or the picture performance will be unacceptable.
Media Player feature provides photos, movies (DivX files) or
music contents stored in a USB storage device or SD memory
card (only for photos).
To select an external input, press
o until the appropriate
input source is selected as described on
page 45 .
Please always refer to the owner’s manual of the equipment to
be connected for full details.
NOTE: Interactive video games that involve shooting a "gun"
type of joystick at an on-screen target may not work with this
TV.
Standby
RED LED – Standby
GREEN LED – Power on
ORANGE LED - Programme
timer set (
digital only)
RED LED – Programme
timer Active (
digital only)
POWER switch
COMMON INTERFACE
The Common Interface is for a
Conditional Access Module
(CAM).
Contact a service provider.
USB port
To access photo,
movies or music
files
HDMI 4 INPUT
(Not available on
all models.)
INPUT 3
(EXT 3)
Input 3 (side)
will take priority over
EXT 3 (back) if both
connections are used
at the same time.
GREEN LED – On Timer set
Illustration represents 42XV635D. SD card slot
To access photo files
Switching on
Using the remote control
Using the controls and connections
•DivX
®
is a registered trademark of DivX, Inc., and is used under license.
• SD Logo is a trademark

13
English
SETTING UP YOUR TV
Startup Application
Before switching on the television, put your decoder
and media recorder, if applicable, to
Standby .
To set up the television use the buttons on the
remote control as detailed on page 6.
a Press the 1 button. The Quick Setup screen will
appear. This screen will appear the first time that the
television is switched on and each time
Reset TV is
selected.
b Highlight Menu Language and press C or c to select
the menu language.
c Press b to highlight Country and C or c to select. The
television is now set up to tune the stations for the
selected country.
d Press Q , the Location screen will appear.
e Press C or c to select Store or Home . For normal
home use, select
Home (skip step 6).
If the Home option is selected the AutoView option will
be activated, allowing the TV to automatically adjust
the picture setting based on the user’s individual
viewing environment. In most cases this will result in
the TV operating with lower energy consumption.
f Press Q . If Store is selected in step 5, the Auto
Demo
screen will appear. Press C or c to select On
to use the demo.
g Press Q . If the Ant/Cable In screen appears, press
C or c to select Antenna or Cable .
h Press Q , the Auto Tuning start up screen will appear
with the option to select between
DTV and ATV , DTV
or ATV if available. Use C or c to select the
appropriate mode.
i Press b or B to highlight Start Scan , then press Q .
NOTE: If Cable is selected in step 7, additional setting
options appear in the
Auto Tuning screen. See “Ant/
Cable In“ section.
The television will start to search for available
DTV
and/or
ATV channels. The progress bar will indicate
the scan status.
You must allow the television to complete the
search.
When the search is complete the television will
automatically select position one.
The
Auto Tuning screen will display the total number
of services found.
j Press C or c to view the DTV (digital channel) or ATV
(analogue channel) lists.
k Use b or B to move through the list to select a
channel then press
Q to view.
In
ATV mode some areas may receive duplicate
stations. There may not be a clear picture or the signal
may be weak, so the station order can be changed
using
ATV Manual Tuning .
REMEMBER: Press ATV/DTV at any time to select
between
ATV and DTV (DTV TV/DTV RADIO/DTV TEXT
if available) modes.
NOTE: The time will be set automatically by
transmission but can be advanced or decreased by
using
Local Time Setting in the DTV Settings screen.
Quick Setup
Quick Setup
Country Germany
Primary Subtitle Language
English
English
English
English
Secondary Subtitle Language
Primary Audio Language
Secondary Audio Language
Menu Language English
Location
Store
To use the TV for displaying in a store showroom, please
select [Store]. [Home] mode is recommended for normal
use.
Ant/Cable In
Antenna
PLEASE NOTE
The Reset TV menu can also be accessed at any
time from the
SETUP menu.
Auto Tuning
DTV and ATVTuning Mode
Start Scan
Auto Tuning
Progress Found
ATV Tune Waiting...
Channel: C7
DTV Tune 3% 2

14
SETTING UP YOUR TV
English
From this menu, you can set the RF input configuration to
cable.
a Press MENU , and select SETUP menu.
b Use b to highlight Ant/Cable In and use C or c to
select
Antenna or Cable .
NOTE: When you attempt to change the Ant/Cable
In
setting, a warning message will appear followed by
PIN entry (if PIN has been set) and a prompt for
Auto
Tuning
.
c When Ant/Cable In is set to Cable , the following
setting options will be provided in the
Auto Tuning
screen.
Press
B or b to select an item, then press C or c to
select your desired option.
With the exception of
DTV Scan Type and DTV Modulation
items, all of the following items will have 2 operating modes.
The first is
Auto where the values for each item are preset by
the system. The second is an
Input mode where you will be
able to enter a single value in place of the pre-set value. If no
channel is currently tuned and the
Input state is chosen, a
system default value will be shown. However, if a channel is
currently tuned when the item is accessed, the value of the
current channel will be displayed.
DTV Scan Type:
This item determines whether a Quick Scan or a Full Scan will
be executed.
The
Quick Scan is a simplified version of the Full Scan that is
designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
DTV End Frequency:
This sets the frequency at which the scan will end.
* Valid entry range for frequency items is 113.000-858.00 for
C-Book/Other and 114.000-858.00 for Nordig-C. If
numbers outside of this range are entered, the values will
automatically be set to the min. or max. valid value as
appropriate.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
* Valid entry range for Symbol Rate is 4000-7200. If a number
outside of this range is entered, value will be automatically
set to the min. or max. valid value as appropriate.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is
greyed out when DTV Scan Type is set to “Full Scan”.
* Valid entry range for Network ID is 1-65535. If a number
outside of this range is entered, value will be automatically
set to the min. or max. valid value as appropriate.
Ant/Cable In (if available)
Auto Tuning
DTV and ATVTuning Mode
DTV
Quick ScanScan Type
AutoStart Frequency
AutoEnd Frequency
AutoModulation
AutoSymbol Rate
AutoNetwork ID
Start Scan

15
SETTING UP YOUR TV
English
NOTE: As new services are broadcast it will be necessary to re-
tune the television in order to view them.
Auto Tuning will completely re-tune the television and can be
used to update the channel list.
It is recommended that Auto Tuning is run periodically to
ensure that all new services are added
. All current channels
and settings, i.e. favourites and locked channels, will be lost.
a Press MENU and use C or c to select SETUP menu.
Use
b to highlight Auto Tuning . Press Q .
b A screen will appear warning that previous
programmes and settings will be deleted.
Use
C or c to select DTV and ATV , DTV or ATV , if
available, then highlight
Start Scan and press Q to
continue with the
Auto Tuning .
NOTE: If you have selected " Others " for the Country
field in the
SETUP menu, and select a tuning mode
other than "
DTV " , choose the optimum ATV
broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV
and/or ATV services.
You must allow the television to complete the
search.
When the search is complete the Auto Tuning screen
will display the services found.
c Use b or B to move through the list to select a
channel then press
Q to view.
ATV Manual Tuning
The television can be tuned-in manually using ATV Manual
Tuning
. For example: if the television cannot be connected to
a media recorder/decoder with a SCART lead or when you
want to tune-in a station on another
System .
Use C and c to move across the screen and select any of the
ATV Manual Tuning options. Then use
B or b to adjust the
settings.
1 Position:
The number to be pressed on the remote control to tune
the channel.
2 System:
Specific to certain areas.
3 Colour System:
Factory set to Auto, should only be changed if problems
are experienced, i.e. NTSC input from external source.
4 Skip:
Set Skip to On ( 8 ) or Off ( ( ) for the selected channel.
See page 17
5 Signal Class:
The channel classification.
6 Channel:
The channel number on which a station is being broadcast.
7 Search:
Search up and down for a signal.
8 Manual Fine Tuning:
Only used if interference/weak signal is experienced. See
page 51.
9 Station:
Station identification. Use the B or b and C or c buttons
to enter up to seven characters.
To allocate a position on the television for a decoder and
media recorder: turn the decoder on, insert a pre-recorded
film in the media recorder and press PLAY, then manually
tune.
Auto Tuning
SETUP
Menu Language English
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
Germany
Antenna
AV Connection
Auto Tuning
DTV and ATVTuning Mode
Start Scan
Previous settings will be lost!
Press EXIT for no change.
Tuning
ATV Manual Tuning
System: I
1 A C 2 0 V C R
I
123 4 65 7 8 9

16
SETTING UP YOUR TV
English
a Press MENU and using C or c select the SETUP
menu. With
b highlight ATV Manual Tuning and
press
Q to select.
b Use B or b to highlight the position required e.g. we
suggest
Pos. 0 for a media recorder.
c Press Q to select. If the channel is set to skip, Skip
must be removed before storing.
d Press c to select System and use B or b to change if
required.
e Then press c to select Search .
f Press B or b to begin the search. The search symbol
will flash.
g Each signal will show on the television, if it is not your
media recorder, press
B or b again to restart the
search.
h When your media recorder signal is found, press c to
move along to
Station . With B , b , C and c put in the
required characters,
e.g. VCR .
i Press Q to save.
j Repeat for each position you want to tune, or press
RETURN to return to the list of channels and select the
next number to tune.
k Press EXIT when you have finished.
l To name external equipment, e.g. DVD on EXT 2, press
o to select o 2, then select Manual Settings from
the
SETUP menu.
m Press c to select Label then using B , b , C and c put
in the required characters, and then press
Q to save.
Different Channel numbers may be displayed.
SETUP
Menu Language English
Country
Ant/Cable In
Auto Tuning
ATV Manual Tuning
DTV Settings
DTV Manual Tuning
Germany
Antenna
AV Connection
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40
C22
5
C25
C28
C30
ATV Manual Tuning
System: I
1 A C 2 0
I
ATV Manual Tuning
Search:
1 C 2 0IA
PLEASE NOTE
This television has direct channel entry if the channel
numbers are known.
Select the
ATV Manual Tuning screen in Step 3 .
Enter the
Position number , the System , then C for
standard (terrestrial) channels or
S for cable
channels and the
Channel number. Press Q to
save.
ATV Manual Tuning
Station: VCR
1 A C 2 0 V C RI
Manual Settings
Label: DVD
EXT 2 A D V D

17
SETTING UP YOUR TV
English
To prevent certain channels from being viewed, positions can be
skipped.
a Select ATV Manual Tuning from the SETUP menu.
b Use B or b to highlight the position to be skipped and
press
Q to select.
c Press c to select Skip .
d Use B or b to turn Skip on.
Press
Q .
8 on the screen indicates a skipped position.
e Press RETURN and repeat from Step 2 or press EXIT .
Each position has to be
individually selected. To turn
Skip off, repeat the procedure for each position.
Skipped positions
cannot be selected by P U and P u
or by the controls on the television, but
can still be
accessed by the number buttons on the remote
control.
Channels may be moved and saved to the position of your
choice.
a Select ATV Manual Tuning from the SETUP menu.
b With the list of channels now showing use B or b to
highlight the channel you want to
move and press c .
c Use B or b to move through the list to your preferred
position. As you do so the other channels will move to
make room.
d Press C to save your move.
Repeat as necessary, then press
EXIT .
Skip
Pos. Channel Station
ATV Manual Tuning
1
2
3
4
6
7
8
C2
C7
S10
S40 ABC1
ABC1C22
5
C25
C28
C30
ATV Manual Tuning
Skip: On
1 A C 2 0I
Sorting positions
Pos. Channel Station
ATV Manual Tuning
2
3
4
5
6
7
8
S10
C7
C40
C22
1
C2
C25
C28
C30
ABC1
ABC1

18
SETTING UP YOUR TV
English
DTV Manual Tuning
NOTE: This feature varies depending on the Ant/Cable In
setting.
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel
is known.
a Select DTV Manual Tuning from the SETUP menu
and press
Q .
b Enter the multiplex number using the number buttons
or use
C or c to adjust the number up or down.
c Highlight Start Scan , then press Q . The television
will automatically search for that multiplex.
When the multiplex is found any channels that are not
currently in the channel list will be added and the
channel information at the top of the screen will be
updated.
d Repeat as necessary. Press EXIT to finish.
When
Ant/Cable In is set to Cable, DTV Manual Tuning
items are as follows:
Frequency – input a specific frequency to be scanned
Modulation – choose from one of five QAM modulation
options
Symbol Rate – input a specific baud rate (KS/s) to be used for
the manual scan
DTV Settings
The channel order may be changed to suit your personal
preference.
a Select DTV Settings from the SETUP menu and press
Q .
b Select Channels and press Q .
c With the list of channels showing use b or B to
highlight the channel you want to
move and press c .
d Use b or B to move through the list to your preferred
position. As you do so the other channels will move to
make room.
e Press C to save your move. Repeat as necessary, then
press
EXIT .
To renumber for the highlighted channel, press the
RED button on the remote control.
Manual Tuning
Manual Tuning for DVB-C
DTV Manual Tuning
WEAK
Signal Strength
Quality
Channel
GOOD 85%
76%
Start Scan
STRONGAVERAGE
13
Pos.New TypeName
ABC ONE
0 New Channels - Total 6
ABC TWO
ABC THREE
ABC NEWS 24
DTV Manual Tuning
2
1
7
40
ABCi
51
Channels
DTV Settings
Channels
Subtitle and Audio
Channel Options
PIN Setting
Parental Control
Auto Channel Update
DVB Character Set
Local Time Setting
Off
11:51
Standard
Pos. Name
ABC ONE
ABC TWO
ABC THREE
CABC Channel
TV
Channels
2
1
7
30
ABC NEWS 24
40
51
ABCi

19
SETTING UP YOUR TV
English
Edit the channel number using the number buttons
and press
Q .
If the
Auto Channel Update is set to On , when the TV is in
standby mode, Digital Tuning is automatically executed and
any new channels are saved.
a Select DTV Settings from the SETUP menu and press
Q .
b Press b to select Auto Channel Update and use C or
c to select On .
This feature allows you to manually set the character set
(
Standard = Table 0 or West = Table 5) to be used for DVB-
C or DVB-T channels.
a Select DTV Settings from the SETUP menu and press
Q .
b Press b to select DVB Character Set and use C or c
to select
Standard or West .
This is a
digital television which is integrated to allow the use
of both
digital and analogue services. However, during the
lifetime of this set it is very likely that
analogue services will
be switched off to allow for more new
digital services.
This ‘switch-off’ will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new
digital services can be viewed without
disruption.
You can select either
Home or Store mode. Home is
recommended for normal home use. Select
Store when using
the television for displaying in a shop, etc.
a Select Location from the SETUP menu.
b Press C or c to select Home or Store .
Auto Channel Update
DVB Character Set
Analogue switch-off
Pos. Name
ABC ONE
ABC TWO
ABC THREE
CABC Channel
TV
Channels
2
1
7
30
ABC NEWS 24
40
ABCi
5- - -
Location setting

20
English
CONTROLS AND FEATURES
General controls
To select a position, use the numbered buttons on the remote
control.
Positions can also be selected using
P U and P u .
To display on-screen information
i.e. position, input mode or
stereo/mono signal, press . Press again to cancel.
The time display facility allows the current (text service) time to
be seen on the television screen.
Press D whilst watching a normal television broadcast to
see a time display from the broadcaster. It will remain on
screen for about 5 seconds.
NOTE: This display may not be available in some cases.
For ATV programmes
If stereo or dual language broadcasts are transmitted, the word
Stereo or Dual will appear on the screen each time positions are
changed, disappearing after a few seconds. If the broadcast is
not in stereo, the word Mono will appear.
Stereo… Press s to select Stereo or Mono .
Bilingual… Bilingual transmissions are rare. If they are
transmitted, the word
Dual will be displayed. Choose the
required programme number and if the word
Dual appears
press
s to select Dual 1 , Dual 2 or Mono .
For DTV programmes
For stereo or dual mono broadcasts, press s and use C or
c to select settings.
For multi-audio track broadcasts, press
s repeatedly to
change the audio language (see ‘Audio language’ on
page 42).
Quick Menu helps you access some options quickly, such as
Picture Mode, Picture Size, More Information, Sleep
Timer
etc.
Press
QUICK to display the Quick Menu and use B or b to
select the option.
NOTE: Quick Menu items are different depending on the
current mode.
Selecting positions
The Time Display – analogue only
Stereo and Bilingual transmissions
Mode Display Pressing c
Stereo Stereo S Left S Right
Dual mono Dual 1
S Dual 2 S Dual
Mono –
Multichannel –
Quick Menu
Mode Quick menu item Description
When viewing a
TV programme or
pictures from the
external input
Picture Mode See page 25.
Picture Size See page 23.
More Information See page 39.
Sleep Timer See page 37.
Media Player See page 30.
Photo Frame See page 34
Headphone Level See page 22.
Speaker Preference See page 47.
System Information See page 43.
When using EPG Genre Colour See page 39.
EPG Update/
Cancel EPG Update
See page 39.
When using
Media Player
(Photo View)
Interval Time See page 31.
Repeat See page 31.
When using
Media Player
(Movie Play)
Picture Size See page 23.
Repeat See page 32.
When using
Media Player
(Movie List)
Repeat See page 32.
When using
Media Player
(Music List)
Repeat See page 33.
0
Quick Menu
Picture Size
Picture Mode AutoView
Super Live
TV Speakers
00:00
More Information
Sleep Timer
Media Player
Speaker Preference
Photo Frame
System Information
Headphone Level