TECHNOLOGY & BENEFITS
VIDEO
• NEW TI HD2+ DMD DLP™chip offers a significantly
cleaner image by filling in the small indentations (Via's) in
the mirrors resulting in an impressive color corrected
contrast ratio (2200:1) at 1100 ANSI Lumens.
• Faroudja FL12300 DCDi+™De-Interlacer/Scaler/
Enhancer - With Adaptive Luma/Chroma Enhancement and
Scaler now includes 3:2 to 2:2 pulldown conversions for
optimizing 60Hz video
• 7 Segment, 5X Color Wheel - To reduce the "rainbow
effect" in DLP projectors the TDP MT800 uses a 7
segment color wheel that includes a neutral density filter in
the green section for smoother, more natural images.
SPECIFICATIONS
Panel Tech. HD2 DMD DLP™
Resolution 1280 x 720 (16:9)
Brightness (Lumens) 1100 ANSI
Aspect Ratio 16:9 and 4:3
Contrast Ratio 2200:1
7-segment, 5-speed Color Wheel 9000 rpm
Improved Lens System High Focus Carl Zeiss™
All-Glass with Manual Focus Ring
Image Offset 116 degree
Lamp 250 W, UHP, 1500H Life with Anti-flicker Circuitry
Focus Manual
Zoom Manual, 1.20:1
Keystone Correction Digital
Projection Distance 5’ (short throw) to 32’ (long throw)
Zoom Ratio 1.4:1
Throw Ratio .48-.67
Operation Noise 35dB (low power), 37dB (high power)
Scanning Frequency 21-91kHz (H), 50-85kHz (V)
Dot Clock 135Mhz
Colors 16.7 million
Projection Modes front, rear, ceiling
TheaterWide Modes enhanced, widescreeen, anamorphic
Power Consumption 350W
Power Source 100 - 240V (50/60Hz)
Remote Control Illuminated
Options Cable cover and ceiling mount
MT800
MT800
http://www.tacp.toshiba.com Customer Service: 800.631.3811
Marketing Communications © Toshiba America Consumer Products, L.L.C.
82 Totowa Road, Wayne, NJ 07470 (2004). All Rights Reserved (02/04.02)
DLP and TI are trademarks of Texas Instruments Inc. Carl Zeiss is a trademark of Carl
Zeiss, Inc. DCDi+ is a trademark of Faroudja Laboratories, Inc., a division of Genesis
Microchip Inc.
Product design and specification subject to change or modification without notice.
Video Input NTSC, PAL, SECAM, 480p, 546p, 720p,
1035i, 1080i, 1080p, (480p input will bypass
de-interlacer, 720p will bypass
de-interlacer/scaler)
Computer Input VGA-SXGA+
Input Terminals DVI with HDCP (1), Component Video
(2 - Gold RCA-Y,PR,Pb), S-Video (2),
Composite Video (1), 15 Pin D-Sub (1),
D-Terminal (-Component)
Control Terminals RS232 (1-9 Pin Male D-Sub),
12V Screen Trigger (2-3.5mm mini-jack, screen
drop and 4 x 3 aspect curtains)
Picture Memory Settings Individual by input, plus 3 user memories
Gamma Control 3 De-Gamma levers: film, video, PC,
Dynamic Gamma (on or off)
Sharpness Control Sharpest, Sharper, Standard, Softer, Softest
Color Temperature Control 6500K (default/8200K/9300K, |
Plus 1 User definable mode with
gain and bias adjustment
PRELIMINARY
