Toshiba dynadock Drivers Technical manual

Updating the dynadock™Drivers to version 2.3
Applicable Models: PA3541U-2PRP dynadock™ VGA
PA3542U-2PRP dynadock™ DVI
Operating System: Microsoft® Windows Vista®
Microsoft® Windows® XP
Microsoft® Windows® 2000
The updated dynadock™ Video Driver upgrades the video support and user interface enhancements for the
following operating systems:
•Windows® 2000 - Video and user interface enhancements
•Windows® XP - Video and user interface enhancements
•Windows Vista® Basic - Video and user interface enhancements
•Windows Vista® Aero™ - Adds Extended mode video support and user interface enhancements
NOTE:
•Before starting the steps below, you must eject the dynadock™ using the TOSHIBA dynadock™
utility icon on your Notification Area/System Tray.
•Disconnect the dynadock™ from the computer. Any devices connected to the dynadock™ will be
disabled.
•Close all programs and applications as you will need to re-start your computer three times.
•The existing dynadock™ drivers will be uninstalled before installing the updated dynadock™ drivers.
Follow the steps below for you operating system
It is recommended to print these instructions

Retrieving the updated dynadock™ drivers – Windows Vista
Go to www.dynadock.com to download the latest dynadock™ driver version 2.3
1. Click on the download icon.
2. Save the dynadock_2.3 file to your computer under the Desktop folder.
It will take several minutes to download the file.
3. Click “Open Folder”
4. Double click on the “dynadock_2.3” file
5. Click RUN
6. WinZip Self-Extractor will open, click OK.
7. Click UNZIP > OK
8. Minimize the Desktop folder. The dynadock™ install menu will appear.
NOTE: The install program will uninstall the existing dynadock drivers:
•Dynadock™ Utility
•TOSHIBA USB Audio
•TOSHIBA Video Dock
•DisplayLink Core Software
9. Click on “Install dynadock™ Utility & Driver”
10. The “Uninstall option menu” will pop up
11. Click OK. This will start to uninstall the old drivers.
12. Select “Remove dynadock™ Utility” and click Finish
13. Click “Close” to exit.
The TOSHIBA USB Audio Uninstallation screen will open.
14. Click OK to Start to uninstall TOSHIBA Audio driver
15. Re-start your computer.
NOTE: After re-starting your computer, Windows Installer will prompt you to uninstall the products.
Click “Yes” to uninstall the remaining TOSHIBA Video Dock and DisplayLink Core Software drivers.
16. Re-start your computer
Installing the new drivers
Run the dynadock™ install program again
1. Double click on the “dynadock_2.3” file from your Desktop
2. WinZip Self-Extractor will open, click OK.
3. Click UNZIP > OK
4. The dynadock™ install menu will appear.
5. Open “dynadock_2.3” folder on your desktop
6. Click on “Install dynadock™ Utility & Driver”
7. Follow instructions on the screen
8. Re-connect the dynadock™ when the program stated “Please Plug in TOSHIBA USB Audio.
9. You will be asked to register for new dynadock™ updates. Click OK to skip. You can always visit
dynadock.com for updates.
10. Re-start your computer.

Retrieving the updated dynadock™ drivers – Windows XP
Go to www.dynadock.com to download the latest dynadock™ driver version 2.3
17. Click on the download icon.
18. Save the dynadock_2.3 file to your computer under the Desktop folder.
It will take several minutes to download the file.
19. Click “Open Folder”
20. Double click on the “dynadock_2.3” file
21. WinZip Self-Extractor will open, click OK.
22. Click RUN > OK > UNZIP > OK
23. Minimize the Desktop folder. The dynadock™ install menu will appear.
NOTE: The install program will uninstall the existing dynadock drivers:
•Dynadock™ Utility
•TOSHIBA USB Audio
•TOSHIBA Video Dock
•DisplayLink Core Software
24. Click on “Install dynadock™ Utility & Driver”
25. The “Uninstall option menu” will pop up
26. Click OK. This will start to uninstall the old drivers.
27. Select “Remove dynadock™ Utility” and click Finish
28. Click “Close” to exit.
The TOSHIBA USB Audio Uninstallation screen will open.
29. Click OK to Start to uninstall TOSHIBA Audio driver
30. Re-start your computer.
NOTE: After re-starting your computer, Windows Installer will prompt you to uninstall the products.
Click “Yes” to uninstall the remaining TOSHIBA Video Dock and DisplayLink Core Software drivers.
31. Re-start your computer
Installing the new drivers
Run the dynadock™ install program again
11. Double click on the “dynadock_2.3” file from your Desktop
12. WinZip Self-Extractor will open, click OK.
13. Click UNZIP > OK
14. The dynadock™ install menu will appear.
15. Open “dynadock_2.3” folder on your desktop
16. Click on “Install dynadock™ Utility & Driver”
17. Follow instructions on the screen
18. Re-connect the dynadock™ when the program stated “Please Plug in TOSHIBA USB Audio.
19. You will be asked to register for new dynadock™ updates. Click OK to skip. You can always visit
dynadock.com for updates.
20. Re-start your computer.