Toshiba Strata DK 24 User manual

TOSHIBA
QUICK
REFERENCE
GUIDE
BUSINESS
TELEPHONE
SOLUTIONS STRATA DK
24/56/96
TOSHIBA Toshiba America Information Systems,
Inc.
Telecommunication Systems Division
9740 Irvine Boulevard, Irvine, CA 92718
[phone]
Item Number:4010324
D96-QR-EKT-R1-4
To set up a Two CO Line
Connection:
¶¶¶¶¶
While on an outside call
established on a CO button,
press the CONF/TRNS button.
¶¶¶¶¶
Press another CO button and dial
a telephone number.
¶¶¶¶¶
Press the CONF/TRNSbutton
after the called party answers.
¶¶¶¶¶
Press the CONF/TRNS button
again, then hang up.
¶¶¶¶¶
The two outside parties are
conversing.
Two (Tandem)
CO Line
Connection
▲
ELECTRONIC TELEPHONE

ELECTRONIC TELEPHONE
To enter a Forced
Account Code:
¶¶
¶¶
¶ Access an outside line by dialing a
line access code or pressing a
CO or PL button.
¶¶
¶¶
¶ Enter the Forced Account Code.
¶¶
¶¶
¶ Listen for dial tone.
¶¶
¶¶
¶ Dial a telephone number.
To enter a Voluntary
Account Code:
¶¶
¶¶
¶ After seizing a CO line or while on
a call: Press the ACCNT button;
or dial * 5 0; or press the
CONF/TRNS button and dial 4
6.
¶¶
¶¶
¶ Enter the Account Code
To activate Automatic
Busy Redial:
¶¶
¶¶
¶ After dialing an outside telephone
number, press the ABR button,
or press the CONF/TRNS
button and dial 4 4.
¶¶
¶¶
¶ Your telephone will signal you
when the called number
becomes not busy.
¶¶
¶¶
¶ To cancel Automatic Busy Redial,
press the ABR button, or press
the INT button and dial 4 4.
To activate Automatic
Call ack:
¶¶
¶¶
¶ After dialing a busy station or
station in the Do Not Disturb
mode, press the ACB button or
dial 4.
¶¶
¶¶
¶ Hang up. The system will call you
back when the station becomes
available.
AutomaticAutomatic
AutomaticAutomatic
Automatic
BusyBusy
BusyBusy
Busy
RedialRedial
RedialRedial
Redial
▲
AutomaticAutomatic
AutomaticAutomatic
Automatic
Call ackCall ack
Call ackCall ack
Call ack
▲
AccountAccount
AccountAccount
Account
CodeCode
CodeCode
Code
CallsCalls
CallsCalls
Calls
▲

ELECTRONIC TELEPHONE
Call ForwardCall Forward
Call ForwardCall Forward
Call Forward
▲
To set Call Forward with
a Call Forward utton:
¶¶
¶¶
¶ Press a Call Forward button:
CFAC, CFB, CFNA, or CFB/
NA.
¶¶
¶¶
¶ Enter the station number to which
calls will forward.
¶¶
¶¶
¶ Press the Call Forward button
again.
To set Call Forward with
an access code:
¶¶
¶¶
¶ Press the INT button and dial a
Call Forward access code: Call
Forward-All Calls, 6 0 1; Call
Forward-Busy, 6 0 2; Call
Forward-No Answer, 6 0 3; Call
Forward-Busy/No Answer, 6 0
4.
¶¶
¶¶
¶ Enter the number of the station to
which calls will forward.
¶¶
¶¶
¶ Press the SPKR button.
To cancel Call Forward:
¶¶
¶¶
¶ Press the same Call Forward
button that you used to set Call
Forward; or press the INT
button, dial 6 0 1, then press
the SPKR button.
To Park a call:
¶¶
¶¶
¶ While on a call, press the CONF/
TRNS button and dial 4 1.
To retrieve the Parked
call:
¶¶
¶¶
¶ Press the INT button and dial 4
2.
Call ParkCall Park
Call ParkCall Park
Call Park
▲

ELECTRONIC TELEPHONE
To Pick Up a call:
¶¶
¶¶
¶ Press the PKUP button or dial 5.
¶¶
¶¶
¶ To pick up a call that is ringing or
held at a station, dial the station
number; for an intercom page or
ringing door phone, dial 3 0; on
an external page, dial 3 5; for a
CO line on hold, dial 7 0 1 ~
7 3 6; for any ringing CO line,
dial 9.
To Transfer a call:
¶¶
¶¶
¶ While on a call, press the CONF/
TRNS button and dial a station
number.
¶¶
¶¶
¶ If the station is idle: Wait for the
station to answer, make a voice
announcement and hang up.
¶¶
¶¶
¶ If the station is busy: Hang up.
To make a Conference
Call:
¶¶
¶¶
¶ While on a call, press the CONF/
TRNS button.
¶¶
¶¶
¶ To add an outside line to the call,
access an outside line and dial a
telephone number; to add a
station to the call, dial a station
number.
¶¶
¶¶
¶ Press the CONF/TRNS button
after the called party answers.
All parties are conferenced
together.
To activate/deactivate
Do Not Distur :
¶¶
¶¶
¶ To activate, press the DND button
so that the LED lights; to
deactivate, press the button
again so that the LED turns off.
Call PickupCall Pickup
Call PickupCall Pickup
Call Pickup
▲
Call TransferCall Transfer
Call TransferCall Transfer
Call Transfer
With Camp-onWith Camp-on
With Camp-onWith Camp-on
With Camp-on
▲
ConferenceConference
ConferenceConference
Conference
CallsCalls
CallsCalls
Calls
▲
Do NotDo Not
Do NotDo Not
Do Not
DisturDistur
DisturDistur
Distur
▲

ELECTRONIC TELEPHONE
ExclusiveExclusive
ExclusiveExclusive
Exclusive
HoldHold
HoldHold
Hold
▲
To place a call on
Exclusive Hold:
¶¶
¶¶
¶ Press the HOLD button twice.
¶¶
¶¶
¶ No one can accidentally pick up
your call.
To receive a Handsfree
Answer ack call:
¶¶
¶¶
¶ You will hear a single warning tone
followed by the caller's voice.
¶¶
¶¶
¶ Without lifting the handset, speak
toward the telephone at a normal
voice level to answer the caller.
To use Handsfree
Monitoring:
¶¶
¶¶
¶ While holding down the SPKR
button during a call, place the
handset on-hook.
¶¶
¶¶
¶ Release the SPKR button.
¶¶
¶¶
¶ Lift the handset to resume the
conversation.
To make an outside call:
¶¶
¶¶
¶ Press a CO or PL button; or,
press the INT button and dial a
line access code (7 0 1 ~ 7 3 6,
8 1 ~8 8, or 9).
¶¶
¶¶
¶ Dial a telephone number, and lift
the handset when the called
party answers.
To make a call to
another station:
¶¶
¶¶
¶ Lift the handset and press the INT
button.
¶¶
¶¶
¶ Dial a station number.
¶¶
¶¶
¶ Make a voice announcement after
you hear the single ring tone, or
if ringing, wait for the called
station to answer.
HandsfreeHandsfree
HandsfreeHandsfree
Handsfree
Answer ackAnswer ack
Answer ackAnswer ack
Answer ack
▲
HandsfreeHandsfree
HandsfreeHandsfree
Handsfree
MonitoringMonitoring
MonitoringMonitoring
Monitoring
▲
Making CallsMaking Calls
Making CallsMaking Calls
Making Calls
▲

ELECTRONIC TELEPHONE
MessageMessage
MessageMessage
Message
WaitingWaiting
WaitingWaiting
Waiting
▲
To leave a Message
Waiting Indication at
another station:
¶¶
¶¶
¶ After reaching a busy or
unanswered station, press the
MW/FL button.
To answer a Message
Waiting Indication at
your station:
¶¶
¶¶
¶ The Message Waiting Indication is
indicated by a flashing MW/FL
LED.
¶¶
¶¶
¶ Lift the handset, press the INT
button, then press the MW/FL
button to call back the station or
voice mail device that left the
indication.
To make a Busy Override
or Executive Override
call:
¶¶
¶¶
¶ To make a Busy Override call, dial
2 after dialing a busy station.
¶¶
¶¶
¶ To make an Executive Override
(barge-in) call, dial 3after
reaching a busy station.
To make a Page
announcement:
¶¶
¶¶
¶ Lift the handset and press the INT
button.
¶¶
¶¶
¶ To page all stations in the All Call
Page group, dial 3 0; station
groups, dial 3 1 ~ 3 4; the All
Call Page group with external
page zones optionally included,
dial 3 9; external page zones,
dial 3 5 ~ 3 8.
OverrideOverride
OverrideOverride
Override
▲
PagingPaging
PagingPaging
Paging
▲

ELECTRONIC TELEPHONE
To redial the Last
Num er Dialed:
¶¶
¶¶
¶ Lift the handset and press any
available CO button.
¶¶
¶¶
¶ Press the RDL (or #)button.
To "Save" a num er to
redial later:
¶¶
¶¶
¶ Any time after dialing a telephone
number and before
disconnecting the call, press the
SAVE button.
To redial a "Saved"
num er:
¶¶
¶¶
¶ Access an outside line, then press
the SAVE button.
To store a Speed Dial
num er:
¶¶
¶¶
¶ Press the RDL (or #) button, then
the SDS (*) button.
¶¶
¶¶
¶ Press the SD button you want to
store the telephone number on,
or dial a Speed Dial access code
(1 0 ~ 4 9 for Station Speed
Dial, 6 0 ~ 9 9 for System
Speed Dial) where you want to
store the number.
¶¶
¶¶
¶ Enter the telephone number, then
press the RDL (or #) button.
To make a call with
Speed Dial:
¶¶
¶¶
¶ Access an outside line.
¶¶
¶¶
¶ Press a SD button, or press the
SDS (or *) button and dial a
Speed Dial access code
(1 0 ~4 9 for Station Speed
Dial, 6 0 ~ 9 9 for System
Speed Dial).
.
Repeat LastRepeat Last
Repeat LastRepeat Last
Repeat Last
Num erNum er
Num erNum er
Num er
DialedDialed
DialedDialed
Dialed
▲
SavedSaved
SavedSaved
Saved
Num erNum er
Num erNum er
Num er
RedialRedial
RedialRedial
Redial
▲
Speed DialSpeed Dial
Speed DialSpeed Dial
Speed Dial
▲

TOSHIBA
QUICK
REFERENCE
GUIDE
BUSINESS
TELEPHONE
SOLUTIONS STRATA DK
24/56/96
TOSHIBA Toshiba America Information Systems,
Inc.
Telecommunication Systems Division
9740 Irvine Boulevard, Irvine, CA 92718
[phone]
Item Number:4010324
D96-QR-EKT-R1-4
To set up a Two CO Line
Connection:
¶¶¶¶¶
While on an outside call
established on a CO button,
press the CONF/TRNS button.
¶¶¶¶¶
Press another CO button and dial
a telephone number.
¶¶¶¶¶
Press the CONF/TRNSbutton
after the called party answers.
¶¶¶¶¶
Press the CONF/TRNS button
again, then hang up.
¶¶¶¶¶
The two outside parties are
conversing.
Two (Tandem)
CO Line
Connection
▲
ELECTRONIC TELEPHONE