Total Super Select TSDLI0402 User manual

4V
LITHIUM-ION
CORDLESS
SCREWDRIVER
TSDLI0402 UTSDLI0402 TSDLI0402S TSDLI0402-4
TSDLI0402-6 TSDLI0402-8 TSDLI0402-9 TSDLI0402E
TSDLI0402H TSDLI0402M

For correct usage, read these instructions carefully and keep in a safe
place for future reference.
Failure to follow all instuctlons listed bBlow, may result in electric shock,
fire and/or serious personal injury.
1. To prevent accidents, keep your work area clean and well Iit.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which could ignite dust or fumes.
3, Keep bystanders, children, and visitors away while operating a power
tool. Distractions can cause you to lose control.
1 .To prevent damage to the power cable never carry the tool by the cable
and keep the cable away from heat, oil, sharp edges, or moving parts.
Should the pewer cable be damaged, replace it immediately to prevent
the risk affairs
2.The battery must only be recharged with the charger included. A
charger that may be suitable far one type of battery may create a risk
of fire when used with another battery.
Stay alert and use extreme caution when operating a power tool. Do
not use any tool while tired or under the influence of drugs, alcohol,
or medication. A moment of carelessness while operating power tools
may result in serious personal injury.
2. To reduce the risk of injury never wear loose fitting clothing or jewellery
when operating the tool and keep your hands away from the moving
parts. If you have fang hair keep it tied back.
3.To avoid accidental start up make sure the safety switch is in the locked
position before inserting the battery.
4, To maintain full control of the tool, do not overreach and keep your
weight evenly balanced over both feet.
5. Always use suitable safety equipment including eye protection，
dust mask, non-slip safety shoes, and ear protection.
1 .Use clamps to secure and support the work piece to a stable platform.
Holding the work piece by hand or against your body is unstable and
may lead to loss of control.
2. Only use the tool for the purpose for which it was intended and never
use force.
3. If the ON/OFF switch is faulty do not use the tool and take it to your
local hardware stare for repair.
2

4. When not in use store the tool out of reach of children.
5. Check the tool regulary for signs of damags and if repair is needed
take it to your local hardware store,
6. Use only accessories that are recammended by the manufacturer
for your model. Accessories that may be suitable for one tool may
create a risk of injury when used on another tool.
1.Tool service must be performed by your local hardware store. Service
or maintenance performed by an unqualified person could result in a
risk of injury.
2. When servicing a tool, use only identical replacement parts.Follow
instructions in the Maintenance section of this manual.Use of
unauthorised parts or failure to follow maintenance Instructions may
result in electric Shock or injury.
1.Hold the tool by the insulated gripping surfaces when the tool may
contact hidden wiring. Contact with a "live" wire will also make exposed
metal parts of the tool “live" and may result in electric shock.
2. Keep hands clear of moving parts.
3. Do not touch moving part. Allow the power tool accessories (bit and
blades etc). to cool before touching them. They can become extremely
hot during use and can burn your skin.
4. Always wear protective safety glasses when operating power tools
and a face mask when the environment is dusty.
Controls and Components:
Cordless Screwdriver:
1.Chuck
2.Worklight
3.Forward/Reverse switch
4.Switch
13
2
4
operation:
1. In the bit into the Chuck until it snaps into place.
2. Grasp the tool firmly with both bands and insert the bit.
3. Start the tool by squeezing the Forward/Reverse trigger switch.
Press the top of the switch to turn the screw FORWARD.
Press the bottom of the switch to REVERSE the screw.
Troubleshooting Tips:
Screwdriver does not work?
•Check and make sure that the unit is fully charged.
Maintenance:
•Use only mild soap and a damp cloth to clean the tool.
•Do not allow any liquids to get inside the tool.
•Do not immerse any part of the tool in liquids.
3

NO. Part Description Qty NO. Part Description Qty
Gear Box Assy
Motor Gear
Screw&Washer M2X6
Motor Plate
Motor
F/R Change Lever
Spring
Trigger
Left&Right Housing
Switch
Tapping Screw ST3.5*16
USB charging line
1
2
3
4
5
6
7
8
9
10
11
12
1
1
2
1
1
1
1
1
1
1
7
1
TSDLI0402 UTSDLI0402 TSDLI0402S TSDLI0402-4
TSDLI0402-6 TSDLI0402-8 TSDLI0402-9 TSDLI0402E
TSDLI0402H TSDLI0402M Spare part list
TSDLI0402 UTSDLI0402 TSDLI0402S TSDLI0402-4
TSDLI0402-6 TSDLI0402-8 TSDLI0402-9 TSDLI0402E
TSDLI0402H TSDLI0402M Exploded view
4

SCAN FOR VIDEO
T0322.V02
www.totalbusiness.com
TOTAL TOOLS CO., PTE. LTD.
No. 45 Songbei Road,
Suzhou Industrial Park, China.
MADE IN CHINA
TOTAL TOOLS WORLD