Totem LAGOS User manual

A
QTYHARDWARE LIST
white bolt
M5x60mm 4
timber gauge
43x20x5 1
bolt M5x50mm 6
washer Ø15 13
bolt M5x40mm 5
dowel Ø10x40 6
bolt M5x30mm 2
felt pad Ø38 8
U washer 4
Allen key 1
B
C
D
E
F
G
H
I
J
PARTS LIST
9
8
7
6
5
4
3
1
2
1Centre legs QTY 2 6Foot rail QTY 1
2Head rail QTY 1
7LHS rail QTY 1
3RHS rail QTY 1 8Legs QTY 4
4Slats QTY 22 9Headboard QTY 1
5Centre rail QTY 1
LAGOS BED QUEEN / KING
ASSEMBLY INSTRUCTIONS

STEP 1: BEGIN ASSEMBLING THE BED FRAME.
STEP 2: REPEAT FOR PART 6.
Screw bolts (A)
and install dow-
els (H) onto
parts 3 and 7.
Use timber
gauge (B) to set
the bolt at the
correct length.
Connect part 7
to part 2, then
repeat for part 3.
Install U wash-
ers (F) over the
bolts (A).
Gently tighten
with the Allen
key provided (J).
2
3
7
6

STEP 3: INSTALL LEGS.
STEP 4: INSTALL CENTRE LEGS.
8
8
C
G
8
8
Use bolt (C) and washer (G) to fit legs to frame.
Gently tighten using Allen key provided (J).
Repeat for all legs.
For use on timber or hard floors, we recommend applying
felt pads (I) at the bottom of the legs.
As per Step 3.
1
C
C
G
G
1
5

STEP 5: FIT CENTRE RAIL TO FRAME.
E
E
G
G
Use bolt (E) and washer (G) to fit centre rail to frame.
Gently tighten using Allen key provided (J).
Adjust the centre legs feet to the correct height.
STEP 6: FIT HEADBOARD.
H
2x
D
5x
G
5x
Install 2x dowels (H) to the bed frame, then install the headboard (9) using 5x bolts (D) and 5x
washers (G).
Gently tighten using Allen key provided (J).

Paddington Gallery
Shop 3 / 188 Oxford Street, Paddington, 2021, NSW, Australia
On-site parking available please enquire.
Contact telephone no: 1300 430 818
Email: [email protected]
STEP 7: FIT SLATS.
Fit the slats (6) by simply placing them onto the slots on the bed frame.
6
Congratulations! Your Lagos bed is now assembled and ready for a good night’s sleep.