Next ZOLA 145445 User manual

We’re confident you’ll love your gorgeous new Next
furniture. However, it’s worth making absolutely c ertain
before yo u pu t it all together.
So, let’s quickl y run throug h these three steps:
TIPS FOR RETURNS
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
1. COLOUR
Make sure you’re happy with the colour
No need to unpack everything, just check the first component.
2. PROTECTIVE PACKAGING
If you’re happy, then it’s time to get opening! Start by laying everything out
on the protective packaging – this will prevent anything getting scratched.
3. PARTS PAGE
Finally, double check you have all the pieces by referencing
the parts page of the instructions.
•Check everything is there (the ‘parts page’
is a handy checklist).
•Pop all the loose Fittings and Fixtures into
the packaging provided or tie them up in a
plastic bag.
•Wrap all the big components back
up in the original protective packaging.
•Close up the box and seal it securely
(don’t be afraid to use plenty of tape).
DO DON’T
•Leave anything assembled -
all components should be dismantled
and separately packed.
•Put loose Fixtures and Fittings
straight into the box.
•Throw it back in the box carelessly –
as it may get damaged.
Then just give us a call on 0333 777 8999 and we’ll sort out a pick up time for you.
BEFORE YOU GET
STARTED...

1
Actual product size
I
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Need Help?
With: Assembly Instructions
Missing or danaged parts
CCALL: 0333 777 8999
KING: W161 X L227 X H112cm
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400
Fabric Content Item No.
145445 Light Grey 100%polyester
393400 Dove 100%polyester

2
Warnings Don'ts
We suggest you retain these instructions for future reference.
Keep fittings out of children's reach and keep children well away
from construction area.
This product should only by used on firm ,level ground.
Please periodically check all fittings and re-tighten as
necessary.
Please do not stand on your furniture.
Avoid exposing the furniture to excessive heat or direct
sunlight as this can cause deterioration of the colour.
Do not tighten screws until fully assembled.
Do not over tighten screws or bolts.
Do not drag or pull your furniture.
Do not use this product if parts are missing, damaged or worn.
Never use scourers, abrasives or chemical cleaners.
BEFORE YOU START
30min
TO NO TIME
Number of people required to assemble
Do's
We suggest you spend a short time reading through this leaflet
before you start.
When you are ready to start, make sure that you have the
right tools, plenty of space.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Unwrap all packaging materials and place the components
on a clean surface to protect them from damage.
We recommend that the packaging is used to protect the
surfaces during assembly.
Carefully check that you have all the parts before beginning
assembly.
Ensure the product is fully assembled as illustrated and all
fixings are fully tightened before use. Check fixings regularly
to ensure they remain tight.
When moving your assembled bed. It is best to lift the bed
and never to drag it. Please check that the centre support
rail is securely fixed in place.
When adjusting the support legs ensure that the foot is set
5mm from the floor surface without the mattress in place.
When in use the legs will create the required support for
the product.
Never allow any kind of liquid to remain on your furniture.
Absorption can cause materials to warp or finishes to
de-laminate.
To clean your item, please use a vacuum or lightly brush clean.
Two people are required to assemble this item
Time to assemble
Missing parts
If you are missing any fixtures and fittings for your product
please contact our customer service team on 0333 777 8999
and they will be happy to arrange for a replacement to be sent
to you free of charge.
Home service technicians
If you have a fault with your product please contact our
customer service team on 0333 777 8999. If you have had the
product for 28 days or less you may be offered a replacement,
refund or for a fully trained home service technician to visit your
home to assess the fault and repair the product where possible.
If you have had the product for more than 28 days we will send
an independent home service technician to review and repair
the product where possible and recommend further action.
You can write to us at
Home Customer Services
Next Retail Ltd,
Desford Road,
Leicester,
LE19 4AT,
To view our full furniture range please visit www.next.co.uk
not supplied
Tools required
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400

2
3
7
9
GETTING TO KNOW YOUR PRODUCT
4
4
4
4
1
8
8
5
10
6
10
10
10
9
R
F
I
T
H
ER
E
R
FI
T
H
E
RE
L
FI
T
H
ER
E
L
F
I
T
H
E
R
E
L
F
IT
H
E
RE
3
3
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400
L
F
IT
H
ERE
R
F
IT
H
E
RE
R
F
IT
H
ER
E

Ref Dimensions Visal Qty Ctn Ref Dimensions Visal Qty Ctn
Components supplied. Please use this guide if you require replacement parts.
1
2
9
1
1
Headboard
Footboard
1
3 Side Rail
4
2
4
Metal Legs
(Option 1) 1
11 4 1
Wood Legs
(Option 2)
4
2
17
8 2
1
1
2
3
4
4
4
4
4
4
5
10
Base Board
Support Rails
Base Boards
Metal
Frame Base
Mattress
Stopper
Gas-Lift
Mechanisms
Gas-Lift
Mechanisms
4
6
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400
R
F I
T
H
E
R
E
R
F
I T
HERE
L
F
I T
H ERE
L
F
I T
H ERE
L
F
I
T
H
E
R
E
LF
I T
HER
E
R
F
I T
H
E R
E
R
F
I T
H E
R
E

5
A
10 20 30 40 50 60 70 80 90 100 110
Ref Qty
Dimensions
2
B16
M5
M8x25
C8M8x30
Fixtures and fittings supplied (actual size)
2
Spare
N/A
1
M6x20 (Option 1)
M6 (Option 1)
M6x16 (Option 1)
M6x20 (Option 2)
M6 (Option 2)
M6x16 (Option 2)
D 6M8x50 1
F
E M8
M8x17
G
55x28
H M8
26 2
36 2
6 1
2
J
M
N
O
M8
L M4
K1 N/A
N/A2
1N/A
16 2
16 2
16 2
81
81
81
M8
N/A
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400

6
1a
LEFT
R
F
I
T
H
E
R
E
R
F
IT
H
E
R
E
R
F
IT
H
E
R
E
L
F
IT
H
E
R
E
L
F
IT
H
E
R
E
L
F
IT
H
E
R
E
R
F
I
T
H
E
R
E
BOLTS SHOULD BE IN CENTRE
OF LONG HOLES
Ax2 M5 Cx8 Ex8 M8 Fx8 M8x17mmM8x30mm
A
C
F
E
L
F
I
T
H
E
R
E
R
F
IT
H
E
R
E
R
F
I
T
H
E
R
E
R
F
IT
H
E
R
E
L
F
I
T
H
E
RE
L
F
IT
H
E
R
E
L
F
IT
H
E
R
E
L
F
IT
H
E
RE
R
F
IT
H
E
RE
R
F
I
T
H
E
RE
CHOOSE WHICH SIDE YOU WANT TO LIFT UP
CHECK THIS DIAGRAM AND IF ACCESS IS NEEDED
FROM LEFT SIDE OF BED, FIT BOTH LIFT
MECHANISMS TO RIGHT SIDE OF THE BED.
BOLT INTO THE HOLES MARKED (R) WITH BLUE LABELS.
THE MECHANISMS ARE LABELED &
PLEASE CAREFULLY FOLLOW THE DIAGRAM BELOW.
ALIGN WITH BLUE LABELS
MAKE SURE FIXING BOLTS ARE IN
THE CENTRE OF THE LONG HOLES
BLUE BLUE
1
2
56
5 6
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400

1b
RIGHT
L
F
I
T
H
E
R
E
BOLTS SHOULD BE IN CENTRE
OF LONG HOLES
A
C
F
E
Ax2 M5 Cx8 Ex8 M8 Fx8 M8x17mmM8x30mm
7
R
F
IT
H
E
R
E
R
F
I
T
H
E
RE
R
F
IT
H
E
R
E
L
F
I
T
H
E
R
E
L
F
I
T
H
E
RE
L
F
IT
H
E
RE
L
F
I
T
H
E
R
E
R
F
IT
H
E
R
E
R
F
I
T
H
E
RE
R
F
IT
H
E
R
E
L
F
I
T
H
E
R
E
L
F
IT
H
E
R
E
L
F
IT
H
E
R
E
L
F
IT
H
E
R
E
R
F
I
T
H
E
R
E
R
F
I
T
H
E
R
E
CHECK THIS DIAGRAM AND IF ACCESS IS NEEDED
FROM RIGHT SIDE OF BED, FIT BOTH LIFT
MECHANISMS TO LEFT SIDE OF THE BED.
BOLT INTO THE HOLES MARKED (L) WITH RED LABELS.
THE MECHANISMS ARE LABELED &
PLEASE CAREFULLY FOLLOW THE DIAGRAM BELOW.
ALIGN WITH RED LABELS
MAKE SURE FIXING BOLTS ARE IN
THE CENTRE OF THE LONG HOLES
RED RED
1
2
5
6
56
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400

Lx1 M4 Mx16 M6x20mm Nx16 M6 Ox16 M6x16mm
2
1
BE10mm
3
2
2
Bx12 Ex12 M8 Fx12 M8x17mmM8x25mm
8
Metal Legs
(Option 1)
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400
1
F
2
1
FabricItem No.
145445 Light Grey
1
2
10
L
M
N
O

9
3
90%
4
Ensure bed frame is square
!
1
2
3
3
Ax2 M5
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400
3
1
2
A
FabricItem No.
393400 Dove
2
1
1
2
11
Wood Legs
(Option 2)
L
M
N
O
Lx1 M4 Mx8 M6x20mm Nx8 M6 Ox8 M6x16mm

10
5
6
3
3
3
4
9
9
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400
9
9

HOLD THEM FORWARD
Slat Frame Support Bar
7
8
7
7
7
1
2
1
Ax2 M5 Bx4 Fx4 M8x17mmM8x25mm Jx2 55x28
A
B
J
F
11
5
5
6
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400

Ax2 M5
9
Dx6 M8x50mm Ex6 M8 Fx12 M8x17mm Gx6 M8 Kx1 M8
100%
12
7
7
6
6
K
A
D
E
F
F
G
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400

SMALL GAP
10
Kx1 M8Hx2 M8
7
8
H
K
13
11
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400

14
Produced in China for Next Retail Ltd.
ZOLA FLIP BED
Assembly instructions
145445/393400-2020-V1.
145445/393400
161
21
112
14
227
13
54.5
36
15
4
28
23
Overall Dimensions (WxLxH cm)Storage Dimensions (WxLxH cm)
152.5 x 202 x 15
KING : 161 x 227 x 112/54.5