Argos WILLOW 4814443 User manual

WILLOW FOLDING TABLE & 4 CHAIRS
Dimensions
Length - 97/140cm
Depth - 47cm
Height - 75cm
Issue 1 - 20/11/15
Assembly Instructions - Please keep for future reference
4818133
4814443
1
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Check you have all the
components and tools listed on
pages 2 and 3.
• Remove all - ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its - nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
Care and maintenance
Width - 43cm
Depth - 52cm
Height - 77.5cm
Table Chair
1

2
Components - Panels
Please check you have all the panels listed below
If you have damaged or missing components,
call the Customer Helpline:
xxxx xxxxxxx
10
Drawer front panel
9Drawer left side Drawer backDrawer right side 11
Right frameLeft frame
Back (68x36cm)
1Top plate
(97x43cm)
Dropleavesx2
(97x48.5cm)
4Door (53.6x36cm)
Frame cross rail
12 13 Frame cross rails x 3
2
35
(36x14cm)
Drawer bottom
6
(42x29x2.5cm)
78
(42.5x93cm) (42.5x93cm) (27.8x93cm)
(31x4cm) (31x4cm)

3
Please check you have all the fittings listed below
Screw cap x 8
Ruler- Use this ruler to help correctly identify the screws
Tools required
E
Wooden dowel x 12
B
Hex key x 1
H
Plastic pin x 2
C
I
Note:The quantities below are the correct amount to complete the assembly. In some cases more fittings
may be supplied than are required.
0510 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
Euroscrew x 40
FD
Crosspoint screw 35mm x 12
K
M
L
G
Hex screw 69mm x 8
J
Components - Fittings
0102030405060708090 100 110 120 130 140 150
0123456
Phillips screwdriver
(medium & large)
Flatblade screwdriver
(medium)
Small
hammer
Ruler/tape
measure
Crosspoint screw 22mm x 4
Screw 30mm x 4
A
Hinge x 10
Handle x 2
Locking screw 40mm x 2
Locking cap x 2
Castor x 4
N

4
Assembly Instructions
Step 1
Step 2
Fix castors.
Fix castors to the
left frame and right
frame.
M
Assemble left and
right frames.
Insert dowels .
Assemble right frame
and left frame with
frame cross rails and
frame cross rail with magnet
using screw cap, hex
screw and key.
8
C .
8Right frame
7Left frame
M
M
M
M
7Left frame
8Right frame
12
13
13
A
B
13
C
B
G
A
B
B
C
A
A
C
B
B
A
C
A
A
B
B
C
C
A
7
12
8
713
BA
G

5
Assembly Instructions
Step 3
Step 4
Assemble back .
Attach back to the
assembled frame using
crosspoint screw.
Insert dowels C
J
Fixing hinges and
handle .
Fixing hinges to the
door using
euroscrews.
Attaching handle to the
door using crosspoint
screw.
C
C
H
H
HH
H
2x
F
E
F
L
L
K
3
H
3
4
E
4F
K
4L

6
Assembly Instructions
Step 5
Step 6
Attaching the door to the
frame.
Fixing the pre-assembled
door to the frame using
euroscrew.
E
Fix fittings to table top.
Fixing hinges to the
table top and drop
leaves using euroscrews.
1
F .
2
4
2x
F
F
1
D
2
2
D
D
Using a light hammer
carefully tap the
plastic pins D
8x
F
E
F
F
F
4
F

7
Assembly Instructions
Step 7
Assemble table
Fixing the pre-assembled
table frame to table top
and drop leaves using
crosspoint screws.
H
Step 8
Assemble drawer
and fit the handle
Fixing locking screw
to the drawer front
panel.
Assembling , drawer
sides with drawer back
using screw.
Inserting bottom to the
frame and fixing front
to the frame using
dowels and locking cap.
Fixing handle using
crosspoint screw.
2
H
H
1
1
2
HH
H
HH
H
H
H
2
5
I
I
K
L
L
5
N
N
N
N
6
11
9
10
C
C
I
5
910
11
N
6
5
C
J
K L
J
J
J

8
Assembly Instructions
Step 9
Secure table
drop-leaves to table
top
Position table
drop-leaf up to
metal hinge rings on
2
table top .
1
Align and hook
drop-leaf fittings over
table top hinges.
Repeat for opposite
drop-leaf.
Raise drop-leaf,
carefully align plastic
pins ,with guide
holes in drop-leaf
and slot together.
D
2
D
2
C
2
1