Totevision EH-2001 User manual

- Weather and water resistant reversed louver
system lets cool air in and warm air out.
- Filters prevent dust & bug infiltrations.
- Lexan window and tamperproof screws help
to protect the monitor and to prevent vandalism.
- Double-wall one inch thick insulated construction
helps to maintain desired temperature range in
summer or winter, and it helps to minimize
internal condensation.
- Optional sun shield enhances readability in direct
sunlight.
- 4 conduit knockouts are available on L/R sides,
and at the back and underneath the enclosure.
- 4” blower @ 110 CFM provides excellent
heat dissipation.
- Heater (14.5 W) and thermostat help to control
internal temperature in cold conditions.
EH-2001
GS-07F-0069L, SIN: 246-42(1), 246-50
Shown with
ceiling mount
option # 1:
pipe bracket
Shown with
ceiling mount
option # 2:
yoke bracket
showing wall
mount bracket
(tilts 20°)
1-1/2" pipe not included
back view
142mm
Weather resistant
housing
Shown with optional
sun shield
1319 Dexter Ave. N • Ste. 020 • WA 98109
Tel: [phone] • FAX: [phone]
E-mail: [email protected]
http://www.totevision.com
The Biggest Thing in
Environmental Housings
Available through:
Specifications subject to change without notice ©2007 ToteVision
P. 3 1
Security Enclosure for LCD Display Model LCD-2001VB
The EH-2001 is designed to offer the best protection possible
to an LCD monitor in harsh applications. This rugged enclosure
can be installed in a dusty or humid environment such as outdoor
installations, warehouses, coalmines, manufacturing facilities, etc.
The EH-2001 is made entirely of aluminum, therefore maximizing
dissipation of excessive heat generated by the LCD monitor if installed
in an area with high temperature. Blower with built-in thermostat will be
activated at 86°F, and the air will flow in and out of the housing
through the rear vents. Special filters prevent dust and insect
infiltration. A special wall mounting bracket is provided at the back
of the enclosure and allows approximately 20° of tilt.
Available Color Options:
Standard color is dark metalic gray
Vents:
Vents are equipped with filters to prevent dust or insect infiltration.
Clean or change filters periodically as needed.
Enclosure Dimensions:
External (WHD): 590 x 516 x 191mm / 23.2" x 20.3" x 7.5"
Internal (WHD): 559 x 457 x 152mm / 22"x 18"x 6"
Sunshield (WHD): 587 x 507 x 162mm / 23.1” x 20" x 6.4"
Net Weight: 27.8 lbs.
Net Weight with sunshield: 29.7 lbs.
Net Weight w/ LCD-2001VB and sunsheild: 50.1 lbs.
Limited Availablility Bulk Special Order may
Call ToteVision with your specifications for quotation for
custom applications (bulk purchase special order only).
Call for availablility
Optional Accessories
EH-SS-2001 White color sun shield (shown above)
EH-PB-2001 Threaded 1-1/2" NPT pipe bracket (shown above)
for ceiling mounting (pipe not included)
EH-YB-2001 Yoke bracket (shown above) for ceiling mounting
(bulk purchase special order only)