Totevision LCD-410 User manual

hank you for purchasing ToteVision products. Please carefully read this manual before
attempting to operate your LCD-410 or LCD-411 monitor.
1. PRECAUTIONS
- This unit has been designed to assure your personal safety; however,
improper use may cause electrical shock and fire hazard.
- For safety do not watch or operate the monitor while driving.
- Do not use this monitor near water such as a bathtub, kitchen sink,
in a wet basement, or a swimming pool.
- If liquid has been spilled into the monitor, unplug the monitor from the DC jack
or battery case and refer to qualified service personnel for repair.
- Do not open the monitor. There are no user serviceable components inside.
- Do not not expose to extreme hot or cold temperatures (in a closed car, beside
stove, etc.)
(Storage temp. range (-30℃∼80℃) (-22℃∼176°F)

(Operating temp. range : (-25℃∼60℃) (-13℃∼108°F)
- When using a DC car cord, always turn the power switch off before starting or
stopping the vehicle.
2. PACKAGE CONTENTS
a. 4" TFT LCD COLOR MONITOR
b. AUDIO-VIDEO INPUT CABLE (LCD-410 only)
C. AUDIO-VIDEO OUTPUT CABLE (LCD-410 only)
d. BATTERY CASE

3. POWER OPTIONS
For use in a car, make sure to use center positive (+) (negative ground)
DC 12V Cigarette Jack. For use in a house, make sure to use an approved
AC adaptor (12 VDC, 380mA) (ToteVision part # AC-1000).
For use with the battery case, please select switch inside battery case
for type of battery to be used.
- DRY Cells (8 AA cells)
- Ni-mH BATTERY (9 AA cells)
4. MONITOR USE
a. Make sure your video source such as CCD CAMERA,VTR, etc. power is ON.
b. Connect your video source to Video IN jack.
c. Turn the power switch ON.
d. Set the VOLUME Control level (for model LCD-410 only).
e. Adjust screen controls-BRIGHTNESS, SHARPNESS, COLOR.
5. CLEANING INSTRUCTIONS
Turn off the monitor before cleaning the LCD screen.
Use a slightly damp (not wet) cloth.
Do not use an aerosol spray directly on the LCD
screen because over-spray may cause electrical shock.

6. TROUBLE SHOOTING
Be sure that all cords are properly connected.
7. SPECIFICATIONS
Model Name : 4”TFT LCD COLOR MONITOR
Screen Size : 4 inch
Display Resolution [Dots] : 480 [W] x 234 [H]
Display : TFT Active Matrix Back Light : LED
Brightness : 250 Cd/m2
Input Signal : NTSC/PAL Auto Recognition
External Power : DC 12V(Center Positive, Negative Ground)
Internal Power : Alkaline or Rechargeable Selectable
A/V INPUT : 3.5mm STEREO (LCD-410), Video INPUT : BNC (LCD-411)
Audio OUTPUT : 3.5mm MONO (LCD-410), Speaker : 28 PHI
VIDEO OUTPUT : 3.5mm MONO (LCD-410), BNC (LCD-411)
Power Consumption : 3.5W/ 290mA, 12V
Power DC 12V (Center Positive), Battery
Dimensions : 146 x 42 x 107mm (Without Battery Case)
Weight : 300g
Design and specifications may be changed without notice.
No power connection
Check audio source
Check volume control
No Audio
(for LCD-410 only)
Inadequate or weak power supply
Brightness control setting needs adjustment
Color control needs adjustment
Dim Video
No power connection
No connection from video source to A/V or BNC jack
No Video
Possible cause
Condition