Totevision LCD-840VL User manual

Key Define:
ŒUP: Press this buttonto increase or decrease the value of the adjustment
functions.
•DOWN: Press this buttonto increase or decrease the value of the adjustment
functions.
ŽENTER: Press this button for menu adjusting, selecting the menu you want
with “UP”or “DOWN”, then press this button again to enter the selected
menu.
•POWER: Press this button to turn on the power.
Press and hold for more than 2 seconds to turn the power off.
Under power on condition, this button acts as input mode selector
(VGA/ S-VIDEO/ VIDEO).
•VGA IN
‘S-VIDEO IN
’VIDEO IN
“DC 12V
1

OnScreen Display for Video Input
Video Main OSD Menu Figure
---Press “ENTER” button to activate theOSD main as
shown on screen
---Press“UP” or“DOWN” button again to select the OSD
menu
1. Brightness
---Press“ENTER” button to enter this mode
---Press“UP” or“DOWN” button to select the desired
adjustment item
*Brightness:Adjust the brightness of the panel
*Contrast:Adjust the white color level of the image
* Back Light:Adjust the back level of the panel
*Recall:Whenyou run the function, the monitor will be
setting to last status of the saving value
*Exit:Return to last menu
2. Video Quality
---Press“ENTER” button to enter this mode
---Press “UP” or“DOWN” button to select the desired
adjustment item
* Brightness:Adjust the brightness of the panel
*Contrast:Adjust the white color level of the image
*Saturation:Adjust the color saturation of the image
* Hue:Adjust the color hue of the image
* Sharpness:Adjust the image from weak to sharp
*Recall: When you run the function, the monitor will be
setting to last
* Exit:Return to last menu
Brightness
Brightness
Contrast
Back Light
Recall
Exit
Video Quality
Brightness
Contrast
Saturat
Hue
Sharpness
Recall
Exit
2

3. OSD Function
---Press “ENTER”button to enter this mode
---Press “UP”or “DOWN”button to select the desired
adjustment item
* H Position:Adjust the horizontalposition of the OSD
menu
*V Position: Adjust the vertical position of the OSD menu
*Language: N/A
*Off Timer:The method of OSD display
*Recall:When you run the function, the monitor will be
setting to last
*Exit:Return to last menu
4. IMAGE
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*VIDEO SYSTEM: NTSC /PAL /SECAM /NTSC 4.43 /AUTO
*DITHERING: N/A
*SELECT INPUT: PRESS TO SELECT INPUTS VGA/S-VIDEO/
VIDEO
*EXIT: RETURN TO LAST MENU
5. Recall
---Press“ENTER” button to enter this mode
---Press“UP” or“DOWN” button to select the desired
adjustment item
*RecallAll:Whenyou run the function, the monitor will be
setting to last
*Exit:Return to last menu
6. Exit Menu
OSD Function
H Position
V Position
Language
Off Timer
Recall
Exit
Image
Video System
Dithering
Select Input
Exit
Recall
Recall All
Exit
Exit Menu
3

OnScreen Display for VGA Input
VGA Main OSD Menu Figure
---Press “ENTER” button to activate the OSD main menu
as shown on screen
---Press“UP” or“DOWN” button again to select the OSD
menu
1.Auto Config
---Press“ENTER” buttonto enter this mode
---Press“UP” or“DOWN” button to select the desired
adjustment item
*Auto Config:Select “YES” to make the monitor have
the best efficiency
*Exit:Return to last menu
2. Position
---Press“ENTER” button to enter this mode
---Press “UP” or“DOWN” button to select the desired
adjustment item
*H Position:Adjust the horizontal position of the image
IMAGE
*V Position:Adjust the vertical position of the image
*Auto Position:Select “YES” to auto adjust the vertical and
Horizontal position
* Exit:Return to last menu
3. Brightness
---Press“ENTER” buttonto enter this mode
---Press“UP” or“DOWN” button to select the desired
adjustment item
*Brightness:Adjust the brightness of the panel
*Contrast:Adjust the white color level of the image
*Back Light: Adjust the back light bule intensity
*Recall:When you run the function, the monitor
will be setting to last status of the saving value
*Exit:Return to last menu
Auto Config
Auto Config
Exit
Position
H Position
V Position
Auto Position
Exit
Brightness
Brightness
Contrast
Back Light
Recall
Exit
4

4. Clock
---Press“ENTER” button to enter this mode
---Press “UP” or“DOWN” button to select the desired
adjustment item
*Clock:Adjust Video Sampling clock
*Phase:Adjust the noise of the image
*Recall When you run the function, the monitor will be
setting to last status of the saving value
*Exit:Return to last menu
5. Color
---Press“ENTER” button to enter this mode
---Press“UP” or“DOWN” button to select the desired
adjustment item
*Color 9300°K:Set the color temperature of the image to
9300 °K
*Color 5500°K:Set the color temperature of the image to
5500 °K
*Balance Color:Adjust the color balance
*User Color:Setthe RGB color of the image by oneself
define
*AUTO BALANCE: AUTOMATIC ADJUSTMENT OF THE BALANCE
*AUJUST COLOR: PRESS “ENTER” BUTTON TO ENTER COLOR
ADJUSTMENT. PRESS “UP” OR “DOWN” BUTTON TO ADJUST
R/G/B COLOR LEVEL AND OFF SET
6. OSD FUNCTION
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*H POSITION: TO ADJUST THE HORIZONTAL POSITION OF THE
OSD MENU
*V POSITION: TO ADJUST THE VERTICAL POSITION OF THE
OSD MENU
*LANGUAGE: N/A
*OFF TIMER:THE METHOD OF OSD DISPLAY
*RECALL: WHEN YOU RUN THE FUNCTION, THE MONITOR
WILL BE SETTTING TO LAST
*EXIT: RETURN TO LAST MENU
Clock
Clock
Phase
Recall
Exit
Color
Color 9300°K
Color 5500°K
Balance Color
User Color
Auto Balance
Adjust Color
OSD Function
H Position
V Position
Language
Off Timer
Recall
Exit
5

7. IMAGE
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” BUTTON TO SELECT THE DESIRED
ADJUSTMENT ITEM
*MODE SELECT: CHANGE DOS MODE RESOLUTION
640 x 400 OR 720 x 350 OR 720 x 400
*DITHERING: N/A
*SELECT INPUT: PRESS TO SELECT INPUTS VGA / S-VIDEO /
VIDEO
*EXIT: RETURN TO LAST MENU
8.INFORMATION
VGA CONDITION
RESOLUTION AND FREQUENCY
9. RECALL
---PRESS “ENTER” BUTTON TO ENTER THIS MODE
---PRESS “UP” OR “DOWN” TO SELECT THE DESIRED
ADJUSTMENT ITEM
*RECALL ALL: TO SET DEFAULT VALUE TO THE ORIGINAL
SETTING
*EXIT: RETURN TO LAST MENU
10. EXIT MENU
Exit Menu
Information
Recall
Recall All
Exit
6
Image
Mode Select
Dithering
Select Input
Exit

SPECIFICATIONS
MODEL NO.: LCD-840VL
SCREEN SIZE:8.4”(DIAGONAL)
DISPLAY RESOLUTION: 800 (H) x 600 (V)
PIXEL PITCH (mm): 0.213 (H) x 0.213 (V)
ACTIVE AREA (mm):170.4 (H) x 127.8 (V)
LCD PROFILE RATIO: 4:3
COLOR CONFIGURATION: R.G. B.VERTICAL STRIPE
BRIGHTNESS RATING: 250 NIT TYP
INPUT SIGNAL: NTSC / PAL (DUAL.CAPABLITY) / SECAM /
NTSC4.43
NUMBER OF PIXELS: 262,144 DOTS
VIEWING ANGLE: LEFT & RIGHT 40 DEGREE
DOWN 10 DEGREE
TOP 30 DEGREE
PIXEL CONFIGURATION: STRIPE
VIDEO INPUT SIGNAL LEVEL: 1V P-P(POSITIVE) / 75 ohm
OPERATING TEMPERATURE: 0℃~+60℃
STORAGE TEMPEATURE: -20℃~+70℃
DC POWER SUPPLY: DC 12V IN (FROM POWER SUPPLY)
POWER CONSUMPTION: <10 W
CONNECTORS: DC-IN, RCA VIDEO, S-VIDEO, D-SUB
RESPONSE: 20ms/RISING TIME, 30ms/FALLING TIME
DIMENTIONS: 291.0 (H) X 214.0 (W) x 37.9(D)
7