Toto WASHLET SW584 User manual

TOTO U.S.A., Inc. 1155 Southern Road Morrow, GA 30260
Phone : [phone]
•You are advised to record the following information to allow quick service.
Date of purchase : Name of shop :
Tel : ( )
Date : year month day
Warranty Registration and Inquiry
For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit
our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please
contact TOTO U.S.A. Inc.,
Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300
when calling from outside of U.S.A.
2021.7.16
D07963R

■ Thank you for your recent purchase of the TOTO Washlet. Please read the enclosed information to ensure the
safe use of your product.
■ Be sure to read this Instruction Manual before using your product and keep it in a safe place for future reference.
SW584 type
SW583 type
SW574 type
SW573 type
WASHLET
Instruction Manual with Warranty

2
What functions are available on your product?
The available functions vary according to the model.
Model
Functions Part No.
WASHLET
SW584 type
SW583 type
SW574 type
SW573 type
Ref.
Page
Basic
Functions
Washing
Rear washing ●
16
Soft rear washing ●
Front washing ●
Wide front washing ●
Changing the washing method
Wand position adjustment ●
Water pressure adjustment ●
Oscillating washing ●
Pulsating washing ●
Personal setting lock ●
Drying Warm Air Drying ●
Changing the temperature Temperature Adjustment ●24
Convenient
Functions
Opening and closing
Opening and closing the toilet
seat with remote control ●— 16
Auto lid opening and closing ●—20
Lighting up Soft light ●—
Heating the toilet seat Heated seat ●—
Saving energy Timer energy-saver ●26
Auto energy-saver ●
Sanitary
Functions
"EWATER+" cleaning Auto wand cleaning ●
22Auto bowl cleaning ●
Removing odors Deodorizer ●
Maintenance
Main Unit
One-touch removal ●32
Removable toilet lid ●33
Wand cleaning ●34
The model name and part number are indicated
on the bottom side of the toilet lid.

3
Safety Precautions ..............................4
Operational Precautions...................11
Parts Names.......................................12
Preparation.........................................14
Changing Settings.............................36
What to Do? .......................................48
●If you cannot operate with the remote
control .............................................48
●Freeze Damage Prevention ............49
●Long Periods of Disuse ...................50
Troubleshooting ................................51
Speci cations ....................................56
Warranty .............................................57
Basic Operations...............................16
Automatic Functions (Convenience
Features) ............................................20
Automatic Functions (Cleaning
Features) ............................................22
Temperature Adjustment ..................24
Energy-Saver Features .....................26
Power Plug.........................................30
Main Unit ............................................31
Deodorizing Filter..............................31
Gap between the Main Unit and the
Toilet Bowl..........................................32
Gap between the Main Unit and the
Toilet Lid.............................................33
Wand...................................................34
Water Filter Drain Valve ....................35
Table of Contents
What functions are available on your product?
Cleaning
Support
Sanitary Toilet
As you move awayAs you stand upAs you approach
 A mist is sprayed in the
toilet bowl to make it
more di󰀩 cult for dirt to
adhere.
 When you sit on
the toilet seat, the
deodorizer operates.
 The wand is cleaned
with "EWATER+".
(The wand extends and
then retracts.)
 "EWATER+" is sprayed
in the toilet bowl to
maintain cleanliness.
The self-cleaning functions operate automatically.
(See pages 22 and 23 for details.)
ReferenceMaintenanceOperationIntroduction

4
Safety Precautions

potable
5
Introduction

6
Safety Precautions (Continued)
power
* Except when using "Wand cleaning".
power

7
35
Introduction

8
Safety Precautions (Continued)
(32°F)
49

9
Introduction

10
Grounding Instructions
This product should be grounded. In the event of an electrical short circuit, grounding reduces
the risk of electric shock by providing an escape wire for the electrical current.
This product is equipped with a cord having a grounding wire with a grounding plug.
The plug must be plugged into an outlet that is properly installed and grounded.
DANGER - Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to
either at-head terminal.
Check with a qualied electrician or serviceman if the grounding wire instructions are not
completely understood, or if in doubt as to whether the product is properly grounded.
SAVE THESE INSTRUCTIONS
Safety Precautions (Continued)

11
■ For prevention of malfunctions
● Do not block the body sensor or the remote control
transmitter or receiver.
<About the Body Sensors>
Two types of body sensor are used.
● Body sensor A detects changes in heat.
 Detection may be di󰀩cult when the room
temperature exceeds 86 °F (30 °C), such as in the
summertime.
 When sunlight is directly on the sensor area or a
heater is used in the bathroom, the sensor may
detect incorrectly due to the heat, resulting in the
automatic operation of functions such as auto lid
opening and closing.
 When the bathroom door is open, the sensor may
detect people who pass to the front or side of the
toilet.
● Body sensor B detects when someone stands in
front of the toilet bowl.
 Body sensor B emits an infrared beam as shown
in the gure. When someone moves into the line of
this infrared beam, the sensor detects the person.
* Detection by the sensor may be di󰀩cult when the
toilet is used by someone small, such as a child.
Body sensor A Body sensor B
<About the seat switch>
● When you sit on the toilet seat, the seat switch
turns ON, enabling you to use various features.
(A click sound is heard when the seat switch is
ACTIVATED.)
Seat switch
(Built-in)
The toilet seat lowers.
Gap
Switch
ON
● The seat switch will not turn on unless you sit on
the seat properly.
Note
● When a child uses the Washlet, the seat
switch may not be ACTIVATED their light
body weight.
● Since the toilet seat is designed to move up
and down, a clearance is provided between
the toilet seat cushion and the toilet bowl.
■ For prevention of damage
● Wipe plastic areas such as the main unit and remote
control with a soft, wet cloth.
● Do not lean against the toilet lid.
■ Problem Prevention
● Disconnect the power plug if there is a risk of lightning.
● A toilet seat cover or a toilet lid cover cannot be used.
(The body sensor or seat switch may not function properly.)
Cover
● Do not urinate on the main unit, toilet seat or wand.
(Doing so may cause pink or brown stains or a malfunction.)
● Do not apply strong forces to the control panel of the
remote control.
● When using a toilet bowl cleaner to clean the toilet,
wash it o󰀨 within 3 minutes and leave the toilet seat
and toilet lid open.
 Wipe o󰀨 any cleaner that remains on the toilet bowl.
(If vapor from a toilet bowl cleaner enters the main unit,
it may cause to a malfunction.)
● Do not expose to direct sunlight.
(Doing so may cause temperature changes resulting
in changes in color, irregular heated seat temperature,
a remote control malfunction, or a Washlet
malfunction.)
● Use radios, etc. away from the Washlet.
(The Washlet could cause interference with the radio signal.)
● If you use a booster seat for infants or a soft
highchair, remove it after use.
(Keeping it installed may prevent some of the functions
from being used.)
● Do not apply force to the remote control.
(May cause malfunctions.)
To prevent the hanger from being dropped, set it in the
remote control hanger when you are not using it.
Be careful not to expose it to water.
Operational Precautions
Introduction

Toilet lid cushion
Washlet control panel
* Use in situations such as when the remote control batteries have
discharged.
POWER ON/OFF button
FRONT ON/OFF button
Soft light
(SW584 type, SW583 type only)
This button cannot be used.
REAR ON/OFF button
Main display
POWER LED
SEAT LED
CLEAN indicator
ENERGY SAVER LED
Water filter drain valve
Water filter
drain valve
Cover
Water drain lever
Seat switch (Built-in)
Toilet lid
Model name,
part no., etc.
Heated seat
Power plug
Power cord
Water supply hose
Warm air dryer door
Wand door
Wand
Water supply valve
12
Parts Names

Toilet lid and toilet seat underside
Right side of main unit
Deodorizing filter
Removal button
Right rear of main unit
Remote control receiver
Body sensor B
(SW584 type, SW583 type only)
Toilet seat cushions
Deodorizer vent
Body sensor A
13
Introduction

1. Insert the battery.
1Remove the remote control
from the hanger.
Hanger
2Open the battery cover and
insert two AA batteries.
Battery cover
AA batteries x2
Close
Open
3Mount the remote control in
the hanger.
■ About the batteries
Use dry cell, alkaline batteries.
Be sure to follow "Safety Precautions" to prevent
the batteries from rupturing or leaking uid, etc.
(Pages 7, 8)
When the remote control is locked to
prevent theft
1Remove the screw from the
remote control  xture.
Phillips screwdriver
Screw
Hanger
Wall
Loosen
Remote control
(Side view)
2Remove the remote control
from the hanger.
● To return
Tighten the screw. (Overtightening may
cause damage to parts such as the hanger.)
14
Preparation Using the Product for the First Time

2. Turn on the power.
1Insert the power plug.
The wand extends and then retracts.
2Check that the POWER LED
on the main display is lit up.
If the LED is not lit up, pressing [POWER
ON/OFF] will light it up.
If the POWER lamp  ickers, the main unit is
not installed properly. Mount the main unit
again. (Page 32)
3. Open the water supply valve.
1Fully open the water supply
valve.
15
Introduction

Opening and closing
Stopping
Washing
Drying
[SEAT OPEN/CLOSE]
Opens and closes the toilet seat.
(SW584 type, SW583 type only)
[STOP]
Stops the operation.
[REAR]
Washes your rear.
* The mode changes between [SOFT REAR] (Flickering)
and [REAR] (Lit) each time the button is pressed.
[WIDE FRONT]
Serves as a bidet over a wider area.
*
The mode changes between [FRONT] (Flickering) and
[WIDE FRONT] (Lit) each time the button is pressed.
[SOFT REAR]
Washes your rear with mild water pressure.
[DRYER]
Dries your front and/or rear.
[FRONT]
Serves as a bidet for women.
[PERSONAL SETTING LOCK 1/PERSONAL SETTING LOCK 2]
You can store your preferred wand position, water pressure and warm water temperature
settings.
●To store a setting
While washing is in progress, set your preferred wand position, water pressure and warm
water temperature, and then press and hold " 1 " or " 2 " for 2 seconds or longer.
●To use
After " 1 " or " 2 " is pressed, please push the button used for washing.
*The wand position and water pressure LED's will light up for about 10 seconds displaying the
programed personal settings. Then the water temperature display will also show the
programmed personal setting.
*
*
16
Basic Operations

[OSCILLATING]
The wand moves back and forth to wash
your rear thoroughly. The setting changes
between "ON" and "OFF" each time the
button is pressed. You can use this function
whenever you feel like it.
[PULSATING]
Washes with the water pressure pulsating
between soft and strong. The setting
changes between "ON" and "OFF" each
time the button is pressed. You can use this
function whenever you feel like it.
[PRESSURE]
The water pressure strength can be
adjusted for washing functions such as
REAR.
("+": Stronger, "–": Softer)
[POSITION]
The wand position can be adjusted to the
front or rear.
"▲" Moves to the front, "▼" Moves to the
rear)
● Functions that operate when a button is pressed during "REAR", "SOFT REAR", "FRONT" or "WIDE
FRONT" washing.
17
Operation

SETTING LOCK
PRESS ENTER
FOR 2 SEC
TO RESET
WATER
SEAT
DRYER
DIRECTIONAL
TEMPERATURE
SETTING
Remote control
display panel
[ENTER]
[MENU]
Select keys
: Select an item
: Select a setting
[TEMP]
Remote control backside
Press [MENU] to display the menu
screen.
You can lock the settings so that
you do not mistakenly operate the
back buttons while using the
remote control.
Setting lock
Display screen during setting lock
How to set (Page 46)
18
This section is an overview of the settings that can be congured with the remote control.
 See the corresponding pages for the detailed descriptions.
 The setting features vary according to the model.
Basic Operations About the Menu Screen

1. CLEANING
2. ENERGY
SAVER
3. AUTO
FUNCTIONS
4. OTHER
SETTINGS
MENU 1/4
WAND
CLEANING
MODE ON/OFF
CLEANING 1/1
1. AUTO ENERGY
SAVER
2. TIMER SAVER
OFF
OFF
ENERGY
SAVER1/2
2. CLEANING
3. LIGHT
AUTO
FUNCTIONS1/3
1. AUTO
OPEN/CLOSE
2. AUTO CLOSE
WAITING TIME
AUTO
OPEN/CLOSE 1/4
90SEC
ON
4. SEAT/LID
3. AUTO OPEN
WAITING TIME
15SEC
LID
1. BEEP
2. SETTING
LOCK
OTHER
SETTINGS1/3
OFF
ON
1. AUTO
OPEN/CLOSE 1. AUTO WAND
CLEANING
2. AUTO BOWL
CLEANING
CLEANING 1/3
ON
ON
3. DEODORIZER
ON
LIGH
T1
/3
1. SOFT LIGHT
2. BOWL LIGHT
ON
ON
3. INDICATOR
ON
3. PERSONAL
SETTING
LOCK
ON
19
Level 1 Level 2 Level 3
Menu Screen
Operation