Towelrads VETRO User manual

“VETRO / STONE / SOAP”Glass Radiator’s Range
Central Heating Product’s version
ver. 2021 Hydro

General Information
Unpack the appliance and place it either on the polystyrene protection or on a carpet
Package content:
Appliance
Wall mounting kit
Instruction manual
- Read these instructions carefully before installing and using the appliance. Keep them
for all future reference.
- Use the appliance only according to these instructions.
- These instructions, however, do not cover all situations that may arise. Use caution and
common sense when installing and using the appliance.
- It is forbidden to modify in any way the features of the appliance or to disconnect fixed
parts.
- Make sure that the appliance is in goodstate.
- Do not use the appliance if damaged.
Contact the retailer or professional qualified personnel.
- The materials used for packaging can be recycled. For disposal use the dedicated recycling
containers.
-
- Positioning and installation
Keep the given minimum distances.
(pic. 2 –3)
Do not install theappliance

- Right below a powersocket
- In close proximity to flammable or combustible materials or pressurized containers.
- Make sure that there are no electrical cables or pipes in the wall which could be damaged
during installation.
Wall mounting
Make sure the plugs and screws provided are suitable for the wall type onto which the
appliance is going to be mounted.
IMPORTANT
It is recommended to secure the appliance only with the A screws on the upper shelves. Leave
the lower screws slightly loosened so as to allow the expansion of the panel when heating.
MORE SPECIFIC FIXING INSTRUCTION IS SEPARATELY PACKED BY IN THE BOX
CONTAINING THE FIXING BRACKETS SET
“VETRO Glass / Stone”Range / central heating version:

SIDE Connection version:
(Front View)
S
(1000 x 500 mm)
M
(1220 x 600 mm)
L
(1520 x 600 mm)
CENTRAL Connection
version:
(Front View)
= WATER-OUTLET / = WATER-INLET –Attention: please allow ± 0,5 cm tolerance
SIZE
HEATING
MEDIUM
HEIGHT mm
WIDTH mm
WEIGHT kg
PERFORMANCE (*)
S
WATER
1000
500
11.00
450 Watt
1.534,3 btu
M
WATER
1220
600
15.60
570 Watt
1.943,7 btu
L
WATER
1520
600
19.20
760 Watt
2.591,6 btu
(*) = calculated in WATT / BTU according to EN442.2 (ΔT 50°C) norm / directive

“SOAP Glass”Range / central heating version:
SIDE Connection version:
(Front View)
S
(1380 x 500 mm)
M
(1660 x 600 mm)
L
(1900 x 600 mm)
CENTRAL Connection
version:
(Front View)
= WATER-OUTLET / = WATER-INLET –Attention: please allow ± 0,5 cm tolerance
SIZE
HEATING
MEDIUM
HEIGHT mm
WIDTH mm
WEIGHT kg
PERFORMANCE (*)

S
WATER
1380
500
11,92
450 Watt
1.534,3 btu
M
WATER
1660
600
16,90
570 Watt
1.943,7 btu
L
WATER
1900
600
19,78
760 Watt
2.591,6 btu
(*) = calculated in WATT / BTU according to EN442.2 (ΔT 50°C) norm / directives
For all models and product-sizes
COMMON FEATURES & EQUIPMENT: every heat exchanger is equipped with 4 x 1/2" thread connection; the
mandatory INLET connection is marked with a RED arrow directly on the exchanger, while the OUTLET is marked
with a BLUE one. The remaining 2 connections are available for freely installation of 1/2" air-vent and blind plug (not
included).
The radiant panel can be installed either vertically or horizontally, as long as the flow and return connection
instructions are followed correctly (as also marked directly on the product).
RACCOMANDATION: the manufacturer highly recommends that the water within the heating circuit is properly
treated through one or more appropriate filter device(s) in order to prevent limescale and similar deposits within
the heat-exchanger that might lead to the gradual loss of its heating-performance because of obstruction(s). We
kindly remind, that through limescale-deposits obstructed heat-exchangers are not
covered by the manufacturer's warranty as well as those installed by wrong inlet / outlet connections leading to
poor water-circulation
(max.) OPERATING PRESSURE:
4 bar
(max.) OPERATING TEMPERATURE:
95°C
HEAT-EXCHANGER WATER
CONTENT:
0,24 / 0,48 / 0,65 L (according to item-size = S / M / L)
(effective: October 2021)
MATERIAL
6 mm thick safety glass + Aluminum-Heat-
Exchanger on panel’s rear side
CONNECTION TYPE
4 x ½ “ Gas (internal thread)
No. OF WALL FIXING
POINTS
4 pcs.
PACKAGING
Cardboard box with inner protections
STANDARD
INCLUDED
EQUIPMENT
Fixing-Brackets-Set & Installation Manual
(ATTENTION: Valves, Blind Plug and Air-
Vent are NOT included)
>100
mm
41/49
mm
50/58
mm

Office & Showroom
Towelrads Ltd.
Cookham Road
Bracknell, Berkshire
RG12 1RB
Telephone
(UK) 01628 625 367
Office hours
8am –5pm Monday to Friday
www.towelrads.com