TP-Link Archer TX20U Plus User manual

AX1800 Wireless USB Adapter
Images are for demonstration only.
Troubleshooting
For technical support, replacement
services, user guides, and other
information, please visit
https://www.tp-link.com/support, or
simply scan the QR code.
Support
· Do not attempt to disassemble, repair, or modify the device.
· Do not use the device where wireless devices are not allowed.
· Keep the device away from water, re, humidity or hot environments.
· This USB Adapter can only be powered by computers that comply with
PS2 (IEC/EN 62368-1) or Limited Power Source (LPS) (IEC/EN 60950-1).
If you have problems during the installation,
please refer to the following online FAQs.
T1. Can’t nd the hardware version of the adapter:
https://www.tp-link.com/faq-46.html
T2. Can’t nd or connect to the wireless networks:
https://www.tp-link.com/faq-2253.html
T3. Can’t install the driver:
https://www.tp-link.com/faq-2252.html
7106509683 REV1.2.0©2022 TP-Link
Quick Installation Guide

a. Click the network icon on the taskbar.
2Install Driver
3Join a Wireless Network
a. Go to My Computer or This PC.
b. Double click the TP-Link disk then run
SetupInstall.exe to install driver.
b. Select your Wi-Fi network, click
Connect and enter the password when
prompted.
1Connect to a Computer
SetupInstall
Notes:
• If you cannot nd the setup program, please
download the driver at www.tp-link.com/support.
• If an unknown publisher message pops up, select Ye s
to continue.
• If Windows User Account Control requires admin
credentials, type user name and password of your
Windows administrator account.
Network 6
Connected
Network settings
Connect automatically
Connect
√
TP-Link_XXXX
Note: It is recommended
to connect the adapter to
a USB 3.0 ( ) port.