TP-Link Archer TX20U Plus User manual

Wireless USB Adapter
Quick Installation Guide
Images are for demonstration only.
1Connect to a Computer
Option 1: Directly Option 2: Via the USB Extension Cable
(if provided)
7106509390 REV1.0.0©2021 TP-Link

Connections are available
Wireless Network Connection
Connect automatically Connect
√
TP-Link_XXXX
a. Click the network icon ( or ) on the
taskbar.
2Install Driver 3Join a Wireless Network
a. Go to My Computer or This PC.
b. Double click the TP-Link disk then run
SetupInstall.exe to install driver.
Troubleshooting
For technical support, replacement
services, user guides, and other
information, please visit
https://www.tp-link.com/support, or
simply scan the QR code.
Support
· Do not attempt to disassemble, repair, or modify the device.
· Do not use the device where wireless devices are not allowed.
· Keep the device away from water, re, humidity or hot environments.
· This USB Adapter can only be powered by computers that comply with
Limited Power Source (LPS).
If you have problems during the installation,
please refer to the following online FAQs.
T1. Can’t nd the hardware version of the adapter:
https://www.tp-link.com/faq-46.html
T2. Can’t nd or connect to the wireless networks:
https://www.tp-link.com/faq-2253.html
T3. Can’t install the driver:
https://www.tp-link.com/faq-2252.html
Note:
If you cannot nd the setup program, please
download the driver at www.tp-link.com/support.
b. Select your Wi-Fi network, click
Connect and enter the password when
prompted.
SetupInstall