TP-Link TL-WN821N User manual

Option 1: Directly Option 2: Via the USB Extension Cable
Connect to a Computer
12Install Driver and Utility 3Join a Wireless Network
Option 1: Via TP-LINK Utility
b. Browse the CD, go to TL-WN821N > Mac OS
X Driver, unzip the Mac OS X version.zip file
and run the Installer.
c. Follow the wizard to complete the installation.
uninstall.commandInstaller.pkg
SHELL
a. Insert the CD.
For Mac OS X
300Mbps Wireless N USB Adapter
Quick
Installation
Guide
This USB Adapter can be powered only by computers
that comply with Limited Power Source (LPS).
Note: You can also download the driver and utility at
http://www.tp-link.com.
a. Click (TP-LINK Wireless Configuration
Utility) on the menu bar.
b. Select your Wi-Fi network and enter the Wi-Fi
password when prompted.
Fri 5:14 PM
TP-LINK_0001
TP-LINK_0903
TP-LINK_TEST_Device
TP-LINK_XXXX
Join Other Network
WPS
Open Wireless Utility
USB-WiFi: On
Turn USB-WiFi Off
Option 2: ViaWi-Fi Protected Setup (WPS)
a. Press the WPS button on your router.
b. In 2 minutes, press and hold the WPS button on
the adapter until the WPS Progress screen appears.
When you are prompted“WPS Protocol Finished!”,
click OK.
c.
7106506492 REV8.0.0
MODEL NO. TL-WN821N

Connect to a Computer
Note: In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
Option 1: Directly Option 2: Via the USB Extension Cable
1 2 Install Driver and Utility
a. Insert the CD and run the Autorun.exe from
the pop-up Autoplay window.
b. Select TL-WN821N and click Install Driver,
then follow the InstallShield Wizard to
complete the installation.
Setup Wizard
Browse CD EXIT
3Join a Wireless Network
Click or (Network icon) on the task bar,
select your Wi-Fi network, and click Connect.
Note: In Windows XP, you need to close theTP-LINK Utility
before using the WindowsWireless Utility.
Option 1: Via Windows Wireless Utility
For Windows
Option 3: ViaWi-Fi Protected Setup (WPS)
a. Press the WPS button on your router.
b. Within 2 minutes, press and hold the WPS button on
the adapter until the configuring screen appears.
Notes:
1. You can also download the driver and utility at
http://www.tp-link.com.
2. In some operating systems, the CD screen will pop up
automatically. Otherwise, run the CD manually.
Note: During the installation, select TP-LINK Wireless
Configuration Utility and Driver if you want to use TP-LINK
Utility and WPS function.
Option 2: Via TP-LINK Utility
Select your Wi-Fi network from the utility window
and click
Connect . The symbol indicates a
successful connection.
Network Name(SSID)
Channel
Signal
Security
2 (2.4G)
5 (2.4G)
11(2.4G)
None
WPA/WPA2-Personal
None
TP-LINK_0903
TP-LINK_TEST_Device
TP-LINK_0001
6 (2.4G) TP-LINK_XXXX
Connect automatically
WPA/WPA2-Personal
Status WPS Profile AdvancedNetwork
Connect
TP-LINK_0903
Network Na
TP-LINK_XXXX
When you are prompted“Successfully connected
to the network by WPS!”, click OK.
For more information, please visit our website
http://www.tp-link.com
©2016 TP-LINK
Networks
Connect automatically Connect
√
Wi-Fi
TP-LINK_XXXX
TP-LINK_TEST_Device
TP-LINK_0903
c.
TL-WN823N
TL-WN821N
Install Driver
TL-WN822N
User Guide