TP-Link TL-WPA4220 TKIT User manual

Existing Powerline Device
(for demonstration only)
* TL-WPA4220 (European version) is used for demonstration in this guide.
Pair the powerline devices.
4
3
Relocate the extender to the Wi-Fi “dead” zone on the same electrical circuit. Connect your
devices to the internet using the default SSID (network name) and password on the label at
the top of the extender.
Note: If the Power LED does not blink, press the Pair
button again.
Press the Pair button on the existing powerline
device for 1 second. The Power LED starts blinking.
A
Within 2 minutes, press the Pair button on the new
extender for 1 second. The Power LED starts blinking.
B
When the Powerline LED on the new extender turns
on, the pairing process is complete.
Existing Powerline Device
Quick Installation Guide
Within 2 minutes
Powerline
Check the new extender’s Powerline LED . Is it on?
Step 4>
Step 3>
2
New Extender
TL-WPA4220
1Plug in the new extender near one of your existing powerline devices.
If you cannot nd this SSID in your Wi-Fi network list, this may mean the Wi-Fi Move feature
has automatically copied over the existing wireless settings (see back for more information).
In this case, use the SSID and password of your existing powerline network to connect.
New Extender TL-WPA4220
Blinking
On
Attention
Wall Outlet Power Strip
Plug powerline devices into wall outlets instead of power strips.
Blinking
* Images may dier from actual products.

©2020 TP-Link 7106508855 REV5.6.0
Q1. How do I reset my extender to factory default settings?
A. With the extender plugged into an electrical outlet, press and hold the Reset button for at least 2
seconds. Release the button and all LEDs turn o. When the LEDs turn back on, the reset process is
complete.
Q2. What should I do if the Powerline LED is o?
A1. Try another wall socket and make sure all powerline devices are on the same electrical circuit.
A2. Try to set up a powerline network by pairing. Refer to the section above for instructions.
A3. If the problem persists, contact our Technical Support.
Q3. What should I do if there is no internet connection in my powerline network?
A1. Make sure all powerline adapters and extenders are on the same electrical circuit.
A2. Make sure the Powerline LEDs are lit on all of your powerline devices. If they are not, pair all devices
again.
A3. Make sure all devices are correctly and securely connected.
A4. Check if you have an internet connection by connecting the computer directly to the modem or router.
Q4. What should I do if a successfully-paired extender does not reconnect after it is
relocated?
A1. Make sure all powerline adapters and extenders are on the same electrical circuit.
A2. Try to pair the extender again, and make sure the Powerline LED is on.
Frequently Asked Questions
Personalize Your Network
tpPLC App
For easy management via your smartphone or tablet, download the app from the
App Store or Google Play, or simply scan the QR code.
tpPLC AppScan to download
tpPLC Utility
For easy management via your computer, download the utility on the product’s
Support page at https://www.tp-link.com/support/download/
Note: For detailed instructions, refer to the utility manual on the product’s Support page.
Web Interface
To access all settings, connect to an extender wirelessly and visit
http://tplinkplc.net.
Note: For detailed instructions, refer to the product manual on the product’s Support page.
TP-Link hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original
EU declaration of conformity may be found athttps://www.tp-link.com/en/ce.
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Plug the powerline devices directly into the wall outlets but not the power strips.
A3. Check for possible interference due to a washing machine, air conditioner or other household
appliances that may be too close to one of the powerline devices. Plug the appliance into the
integrated electrical socket to remove the electrical noise if your powerline device has an
integrated electrical socket.
For technical support, replacement services, user guides, and other information, please
visit https://www.tp-link.com/support, or simply scan the QR code.
If you have any suggestions or needs for our product guides, you are welcome to email
[e-mail].
To communicate with TP-Link users or engineers, please join the TP-Link Community at
https://community.tp-link.com.
Please read and follow the above safety information when operating the device. We cannot guarantee
that no accidents or damage will occur due to improper use of the device. Please use this product with
care and operate at your own risk.
Pair
Reset
Pair Button
Physical Appearance
DESCRIPTION
ITEM
Press and hold for 1 second to set up or join a secure powerline network.Pair Button
Wi-Fi Button
Reset Button
Press for 1 second to start copying Wi-Fi settings from the router.
Press and hold for about 5 seconds to turn Wi-Fi on or o.
Press and hold the Pair button for at least 2 seconds, then release the button to reset the
extender to default settings.
Reset
DESCRIPTION
LED STATUS
Power
Powerline
Ethernet
On
O
The powerline extender is on.
Pairing is in process.
The powerline extender is o.
Blinking
Wi-Fi
The wireless function is enabled.
Slowly: The powerline extender is cloning 2.4GHz wireless network settings
from the main router.
Quickly: The powerline extender is syncing 2.4GHz wireless network
settings.
The wireless function is disabled.
Ethernet Ports
On
Blinking
O
The Ethernet port is connected or not connected.
The powerline extender is connected to a powerline network.
The powerline extender is not connected to any powerline network.
On/O
On
O
Unify Wi-Fi Networks via Wi-Fi Auto-Sync
Wi-Fi Auto-Sync enables you to easily create one unied Wi-Fi network throughout your home.
If you have paired your powerline devices, the Wi-Fi settings will
automatically sync from the existing extender to the new one.
Auto-Sync Settings to More Extenders via Wi-Fi Move
Note: For more extender models that support Wi-Fi Auto-Sync, visit http://www.tp-link.com.
Note: If Wi-Fi settings are not copied within 2 minutes, manually change the extender’s
Wi-Fi settings.
Note: If your router doesn’t have a WPS button, manually change the extender’s Wi-Fi
settings via the tpPLC app, tpPLC Utility, or web interface.
3. Relocate the extender and enjoy the internet using your router’s
SSID and password.
Copy SSID and Password from Your Router via WPS
If you personalize any extender with LED schedules or other Wi-Fi settings
(such as Wi-Fi schedules and guest network), the settings will also
automatically sync to other extenders in the secured powerline network.
1. Plug in the extender in the same room as your router. Wait until the
extender’s Wi-Fi LED turns on.
2. Press your router’s WPS button. Within 2 minutes, press the
extender’s Wi-Fi button for 1 second. The extender’s Wi-Fi LED
starts blinking. When it stays on, Wi-Fi settings are copied.
WPSWAN LAN
Wireless Router Extender
Wi-Fi Button
WPS
Blinking
On
Within 2 minutes
SAME
SSID & Password
DIFFERENT
SSIDs & Passwords
Auto-Sync
Network B
Network C
Network A
Network A
Network A
Network A
SAME
SSID & Password
Powerline LED
Power LED
Ethernet LED
Wi-Fi Button
Wi-Fi LED