TP-Link TL-SC3130 Quick start guide

Intelligent IP Installer

How to Use Intelligent IP Installer ........................................................................................1
1. Initial use Intelligent IP Installer......................................................................................2
2. Configuration of Main Menu............................................................................................3
3. Camera..............................................................................................................................4
3.1 Setup...............................................................................................................................5
3.2 Upgrade........................................................................................................................12
3.3 Factory Default ............................................................................................................13
3.4 Reboot..........................................................................................................................14
4. User.................................................................................................................................15
4.1 Info................................................................................................................................18
4.2 User ..............................................................................................................................19
4.3 Date/Time .....................................................................................................................20
4.4 TCP/IP...........................................................................................................................21
4.5 PPPoE...........................................................................................................................23
4.6 DDNS ............................................................................................................................24
5. About...............................................................................................................................25

1
How to Use Intelligent IP Installer
This chapter introduces how to monitor the image from the camera using Intelligent IP Installer. The IP
cameras can be used with Microsoft web browsers and Intelligent IP Installer in Windows operating
systems. This document focuses on introducing you to Intelligent IP Installer. If you want to know how to
use IP cameras with Microsoft web browsers, please check the camera user manuals.

2
1. Initial use Intelligent IP Installer
1. Install the program of Intelligent IP Installer.
)Note:
¾If you’re using Windows 98 or ME, please install IP Installer before using WEB UI to ensure the system
runs normally.
¾If you can’t view the recorded video file (missing video decoder), please install Xvid codec while
installing Intelligent IP Installer. (For Windows 98, ME or 2000 server, the codec might not work
properly. You’ll need to download Xvid codec 1.0 from the internet.)
2. Click Start -> Program Files ->TP-LINK -> Intelligent IP Installer -> Intelligent IP Installer to start
using the program.

3
2. Configuration of Main Menu
Main Menu
Camera
Click this button to get into common information of all Network Cameras in local network. You can connect
the specific Network Cameras to get live video and to optimize video setting.
User
Click this button to get into user basic setting information of all Network Cameras in network. You can
connect the specific Network Cameras to get and set basic values. This section includes Info, User, Date
Time, TCP/IP, PPPoE and DDNS.
)Note:
Only the administrator has access to the Settings.
About
Click this button to get the information of Intelligent IP Installer.
Main Menu

4
3. Camera
The Camera page provides you all Network Cameras in the network with product factory information,
including product Name, IP Address, MAC Address, Mod. Name and Mod. ID.
Search：Click it to search Network Cameras in the network, it displays Network Cameras information
including Name, IPAddress, MAC, Mod. Name and Mod. ID.
)Note:
¾If the camera is not located in local network, it will appear in red text. Some information is not available
when the IP camera is not in local network.
¾The IP addresses shown in the "IP Address" field reflect those on the local network. They may be from
the DHCP server. If there is no DHCP server, the video server will try to find a free IP address (this
takes from 15 second to 3 minutes, depending on the LAN status). The method of finding IP address is
seeking from 192.168.1.2, to 192.168.1.254. If any of the address inside this range is free, the Network
Video server will be assigned to this IP address, and its subnet mask would be 255.255.255.0.

5
Link to IE：After searching Network Cameras in network, you can click to specific Network Cameras in
search area and press Link to IE to use IP cameras with Microsoft web browses.
3.1 Setup
Choose a network camera, click on Setup to change the configurations. You have
to key in the username and password of the administrator to enter the setup page.
The following screen will display:
)Note:
For IP cameras not in local network area (which appears in red in the search screen), you can still use setup
to change the configurations of these cameras.
System Information: The system information is displayed.
Press Next to continue, Previous to go back, Cancel to go to the main page.

6
Account settings: The account setting is displayed. You can change the account setting here.
Press Next to continue, Previous to go back, Cancel to go to the main page.

7
Date/Time settings: You can set the date/time of the network camera here. See ”Hint” for details.
Press Next to continue, Previous to go back, Cancel to go to the main page.

8
Network settings: You can change the network settings of the network camera here. See “Hint” for details.
Press Next to continue, Previous to go back, Cancel to go to the main page.

9
PPPoE settings: You can change the PPPoE settings here. See “Hint” for details.
Press Next to continue, Previous to go back, Cancel to go to the main page.

10
DDNS settings: You can change the DDNS settings here.
Press Next to continue, Previous to go back, Cancel to go to the main page.

11
Apply settings: Click on Apply to use the new settings.
Choose Reboot system to apply new (network) settings to reboot after the settings are applied.

12
3.2 Upgrade
Choose a network camera, click on Upgrade to upgrade the firmware. You have to
key in the username and password of the administrator to enter the upgrade page.
The following screen will display:
Choose the firmware image file you want to upgrade and press Upgrade to start. The device will
automatically reboot after upgrade.

13
3.3 Factory Default
Choose a network camera, click on Factory default to reset the configurations to
default. You have to key in the user name and password to use the factory default function.
Click on OK to continue. The device will automatically reboot after the configurations set to default.

14
3.4 Reboot
Choose a network camera, click on Reboot to reboot the device. You have to key
in the user name and password to use the reboot function.
Click on OK to continue. The device will automatically reboot.

15
4. User
The System page provides you all Network Cameras configurations in the network with product or
downloaded configuration file information, including Info, User, Date Time, TCP/IP, PPPoE and DDNS.
Load configuration File：Select From PC File or From Device, the former can load information of
downloaded configuration file and the latter can load Network Camera configurations in the network.
From PC File：Select it and press Load to select configuration location from PC.
)Note：
Configuration file format is * conf.

16
From Device：Select it and press Load to select the specific device in the network. Type the Username
and Password to load configuration from device.
)Note：
If you have connected to the specific device before, you don’t have to type the Username and Password
again.

17
After loading, you can get configuration from PC files or devices. Intelligent IP Installer displays the sub
folders including Info, User, Date Time, TCP/IP, PPPoE and DDNS.

18
4.1 Info
The Info page provides you with product factory information, including Product Name, Firmware Version
and Web version.