TP-Link WR820N(EU) User manual

If your internet connection is through an Ethernet
cable directly from the wall, instead of through a
modem, connect the Ethernet cable to the router’s
WAN port, and skip steps 1, 2, and 3.
Quick Installation Guide
http://tplinkwi.net
New Password:
Conrm Password:
Let’s Get Started
2. Launch a web browser, and enter http://tplinkwifi.net or
http://192.168.0.1 in the address bar. Create a password
to log in.
Note: If the login window does not appear, please refer to FAQ > Q1.
3. Follow the step-by-step instructions to set up the internet connection.
Note: If you are not sure of the Connection Type, please click AUTO DETECT or contact
your ISP (Internet Service Provider) for help.
1. Connect your computer to the router (Wired or Wireless)
Congure the router
Wired
Turn o the Wi-Fi on your computer and connect it to the router
via an Ethernet cable.
*Images may dier from actual products.
Wireless
Connect your device to
the router’s Wi-Fi using
the SSID (network name)
and Wireless Password
printed on the label at
the bottom of the router. Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
300Mbps Wi-Fi Router
Tether App
The TP-Link Tether app provides a simple, intuitive way to
access and manage your router. Scan the QR code to
download Tether from the Apple App Store or Google Play.
Flip the page over to know more.
Verify that the LED turns solid on before
continuing with the conguration.
Modem
Power adapter
Connect to the power socket
Connect to the internet
Power o the modem, and
remove the backup battery if it
has one.
Turn on the modem and then wait
about 2 minutes for it to restart.
Connect the
power adapter
to the router.
Connect the powered-o modem to the
router’s WAN port via an Ethernet cable.
Router
Important

Range Extender Mode
1. Configure
A. Place the router next to your host router and power it on.
B.Connect a computer to the router via an Ethernet cable or wirelessly by
using the SSID (network name) and Wireless Password printed on the
label at the bottom of the router.
C.Launch a web browser and enter http://tplinkwifi.net in the address bar.
Create a password to log in.
D. Click Change Mode on the top right corner and select Range Extender
Mode. Wait for the router to reboot.
E. Use http://tplinkwifi.net to log in to the web management page and follow
the step-by-step instructions to set up the internet connection.
In this mode, the router boosts the existing wireless coverage in your home.
Place the router about halfway between your host router and the Wi-Fi
“dead” zone. The location you choose must be within the range of your
existing host network.
2. Relocate
Access Point Mode
In this mode, the router transforms your existing wired network to a wireless
one.
©2019 TP-Link 7106508525 REV2.0.0
FAQ (Frequently Asked Questions)Appearance
Internet LED
LAN LED
Wi-Fi LED
Orange
Green
Green
WPS/RESET
Button
Press for 1 second to enable the WPS function.
Press and hold for more than 5 seconds to reset the router to its factory default settings.
* To avoid device damage, do not disconnect or power o your router during the upgrade.
Blinking:
The WAN port is not connected while in Router Mode.
Solid on:
The wireless function is enabled.
Blinking:
WPS connection is in progress. This may take up to 2 minutes.
Green Solid on: At least one LAN port is connected.
Solid on:
Router/WISP Mode: Internet is available.
Access Point Mode: The WAN port is connected.
Range Extender Mode: The router is connected to the host network.
Blinking:
The system is starting up or rmware is being upgraded*.
Item Description
WISP Mode
In this mode, the router connects to the ISP network wirelessly in areas
without wired service.
A.Power on the router.
B.Connect a computer to the router via an Ethernet cable or wirelessly
by using the SSID (network name) and Wireless Password printed on
the label at the bottom of the router.
C.Launch a web browser and enter http://tplinkwifi.net in the address
bar. Create a password to log in.
D. Click Change Mode on the top right corner and select WISP Mode.
Wait for the router to reboot.
E. Use http://tplinkwifi.net to log in to the web management page and
follow the step-by-step instructions to set up the internet connection.
Router DevicesPublic Wi-Fi
Backup & Restore (or System > Backup & Restore in Access Point Mode and
Range Extender Mode), and locate the Factory Default Restore section. Then Click
FACTORY RESTORE. The router will restore and reboot automatically.
Q4. What can I do if I forgot my web management password?
Refer to FAQ > Q3 to reset the router, then create a password to log in.
Q5. What can I do if I forgot my wireless network password?
The factory default wireless password is printed on the label of the router.
Connect a computer directly to the router using an Ethernet cable. Log in to the
router’s web management page, and go to Wireless to obtain or reset your wireless
password.
Q1. What can I do if the login window does not appear?
Reboot your router and try again.
If the computer is set to a static IP address, change its settings to obtain an IP
address and DNS server address automatically.
Verify that http://tplinkwifi.net or http://192.168.0.1 is correctly entered in the web
browser. Alternatively, enter http://192.168.1.1 in the web browser and press Enter.
Use another web browser and try again.
Disable and then enable the network adapter being used.
Q2. What can I do if I cannot access the internet when in Router mode?
Reboot your modem and router, then try again.
Check if the internet is working normally by connecting a computer directly to the
modem using an Ethernet cable. If it is not, contact your Internet Service Provider.
Log in to the web management page of the router, and go to the Network Map
page to check whether the WAN IP address is valid or not. If it is not, check the
hardware connection or contact your internet service provider.
For cable modem users, log in to the web management page of the router. Go to
Advanced > Network > Internet and locate the MAC Clone section. Select Clone
Current Device MAC, and click SAV E. Then reboot both the modem and the router.
Q3. How do I restore the router to its factory default settings?
With the router powered on, press and hold the WPS/RESET button on the back
panel of the router at least 5 seconds until the Internet LED blinks. The router will
reboot.
Log in to the web management page of the router. Go to Advanced > System >
Solid on:
Router Mode: The WAN port is connected, but internet is not available.
Access Point Mode: The WAN port is not connected.
Range Extender Mode: The router is not connected to the host network.
WISP Mode: Internet is not available.
Safety Information
Keep the device away from water, re, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use damaged charger or USB cable to charge the device.
Do not use any other chargers than those recommended.
Do not use the device where wireless devices are not allowed.
Adapter shall be installed near the equipment and shall be easily accessible.
DevicesRouterWired Router
Ethernet4Ethernet3Ethernet1Ethernet2Internet
Ethernet4
Ethernet
Internet
WAN
Devices Host Router Router
Extended NetworkHost Network
For technical support, the user guide and other information, visit https://www.tp-link.com/support.
If you have any suggestions or needs on the product guides, welcome to email
[e-mail].
To ask questions, find answers, and communicate with TP-Link users or engineers, please visit
https://community.tp-link.com to joinTP-Link Community.
Note: You can also go to Advanced > Operation Mode to switch to Access Point Mode.
A.Power on the router.
B.Connect the router’s WAN port to your wired router’s Ethernet port via
an Ethernet cable as shown above.
C.Connect a computer to the router via an Ethernet cable or wirelessly by
using the SSID (network name) and Wireless Password printed on the
label at the bottom of the router.
D. Launch a web browser and enter http://tplinkwifi.net in the address bar.
Create a password to log in.
E. Click Change Mode on the top right corner and select Access Point
Mode. Wait for the router to reboot.
F. Use http://tplinkwifi.net to log in to the web management page and
follow the step-by-step instructions to set up the internet connection.
Note: You can also go to Advanced > Operation Mode to switch to Range Extender Mode.
Note: You can also go to Advanced > Operation Mode to switch to WISP Mode.