Trailer Vision Equi-Vue2 User manual
Video!Recording!
Photo!
Photo!Footage!(view)!
Video!Footage!(view)!
Equi-Vue2™*USER*MANUAL (V2)
INTRODUCTION:*
Thank!you!for!purchasing!our!Equi>Vue2™!wi>fi!camera.!This!User!Manual!includes!information!about!how!to!correctly!use!the!
camera!and!product!information,!including!operation,!installation!and!technical!specifications.!Please!read!the!User!Manual!
carefully!before!using/installing!the!camera.!
SPECIFICATIONS:!
Battery!capacity!
2100mAh!
Battery!voltage!
3.7V!
Recharge!time!
Approx!4.5!h!
Recharge!voltage!/!current!
5V!/!480mA!(Max)!
Operating!current!
260mA!
Wireless! communication!
format
Wi>Fi!/!2.4Ghz!
Wireless!transfer!distance!
15m!line!of!sight!
Water!Resistance!
IP68!
Night!Vision!
IR!(6)!
Lens!Angle!/!Resolution!
120˚!/!700TV!Lines!(Non!Mirror!Image)!
Operating!Temperature!
>20˚C!to!+70˚C!
CHARGING*THE*CAMERA:*
1. Remove!the!orange!cover!by!gently!pulling!it!from!the!rear!of!the!camera.!
2. Insert!the!charging!lead!and!connect!to!a!USB!adapter!(the!LED!will!illuminate!Red!when!charging)
3. The!camera!will!fully!charge!in!approx.!4.5!hours!&!then!LED!will!be!off.
ICON*DESCRIPTIONS:*
2. The!camera!includes!a!magnet!and!can!be!easily!‘fixed’!to!any!metal!work!(be!careful!to!check!that!the!fixing!location!is
magnetic,!before!letting!go!of!the!camera).
3. A!velcro!fixing!square!is!also!provided,!please!utilise!on!a!wall!(not!roof)!and!ensure!the!chosen!location!is!clean/dry!(so!that
the!glue!can!achieve!a!good!bond).!
INSTALLATION:*
1. Choose!a!suitable!location!for!the!camera,!high!up!on!a!wall,!as!far!from!the!horse(s)!as!possible,!usually!provides!the!best!view
(hold!the!camera!in!the!chosen!location!&!check!the!view,!before!fixing).!
OPERATION*(Android):*
1. Download/install!the!'Safetycam' App!from!Google Play:
2. Turn!the!camera!on,!by!pressing!the!button!on!the!front!(the!blue!LED!will!illuminate).
3. Open ‘Settings’ / ‘Wi-Fi’ and select ‘SONIX_’ (ignore any message about no Internet
connection etc).
4. Open the Safetycam App.
5. If the camera image/view is not displayed please check that 'Location Services' in
Settings/App Settings is turned on.
OPERATION*(Apple/iOS):*
1. Download/install!the!‘Safetycam’!App!from!the!App!Store!or!use!the!following!QR!code:
2. Turn!the!camera!on,!by!pressing!the!button!on!the!front!(the!blue!LED!will!
illuminate).!
3. Open!‘Settings’!/!‘WihFi’!and!select!‘SONIX_’(ignore any message about no
Internet connection etc).
4. Open!the!Safetycam!App!and!the!camera!image!will!be!displayed.
5. If the camera image/view is not displayed please check that 'Location Services' in
Settings/App Settings is turned on.
For!Technical!Support!please!email:!
support@trailervision.co.uk!
Or,!during!office!hours!please!call:!01733*246473!
To RESET the Camera:*
1. Turn the Camera on and leave it switched on until the power LED extinguishes.
2. Turn the Camera off.
3. Charge the Camera for at least 8 hours / overnight.
(This process also 'conditions' the battery).
Other Trailer Vision Security Camera manuals
