TRAMFABRIEK SPC100 User manual

drM
2
0
20
/
7
2
SPC100
Features
1. For N/HO/OO gauge
2. Power by Mini USB 5V
3. Large LCD display
4. Freely switch N/HO/OO gauge
5. Two detection modes, reflective and blocking.
6. Size 100mm x 50mm x 14mm
Panel description
SERSOR1 Sensor 1
SERSOR2 Sensor 2
Key1 Select key 1
Key2 Select key 2
MINI USB Power 5V input
LED Power display
VR1 Sensor 1 sensitivity adjustment
VR2 Sensor 2 sensitivity adjustment
KEY1
KEY2
MINI
USB
LED
SENSOR1 SENSOR2 VR1
VR2
tramfabriek

drM
2
0
20
/
7
3
Instructions for use
1. Use a 5V adapter for the power supply.
2. The power 5V is plugged in by mini USB.
3. After turning on the power, the LED lights up and the LCD display “drM SPC100”.
4. After displaying for 3 seconds, the LCD will display the gauge menu N and
HO/OO.
5. The Key1 selects N gauge. Press the button to enter the detection speed state.
6. The Key2 selects HO/OO gauge. Press the button to enter HO and OO menu. The
Key1 selects HO gauge. The Key2 selects OO gauge. Press the button to enter the
detection speed state.
7. After the train passes through the detection zone. The LCD will display speed for
3 seconds.
8. After the SPC100 enters the detection speed state.
 Switch unit
1. Before the power is plugged of pressing the Key1 button.
2. After the power is plugged in, keep pressing key 1 until the LCD displays Km and
MPH.
3. The Key1 selects Km. Key2 selects MPH.
4. The unit will auto save.

drM
2
0
20
/
7
4
 Switch gauge
1. The LCD displaying detect speed to press the Key1 button enter select gauge.
 Switch mode
1. The SPC100 has two detection modes (Reflection and Block).
2. The train body color is a bright color system using reflection mode.
3. The train body color is a dark color system using block mode.
4. The LCD displaying detect speed to press the Key2 button enter select modes.
5. The LCD will display the mode menu reflection and Block.
6. The Key1 selects mode reflection. The Key2 selects mode block.
7. Use the reflection mode to detect that there can be no objects that reflect the
light source in front.
Use the mask mode to detect objects that reflect light sources on the opposite
side of the track, such as white acrylic or white paper to provide reflected light
sources.
 Sensor sensitivity adjustment
1. Clockwise rotation detection is weak. Counterclockwise rotation detection
is strong.

drM
2
0
20
/
7
5
Precautions
 Do not place any conductive materials (liquid, metal...) on the SPC100.
 Do not remove or replace any components under the speedometer.
 Keep out of the reach of children under 14 years of age.
 The occurrence of the above situation will cause the speedometer to be damaged.
www.tramfabriek.nl [e-mail]