Tranberg TEF 2500 420 User manual

Tranberg AS | P.O. Box 8033 | N-4068 Stavanger | Norway | Tel.: [phone] | Fax.: [phone]
E-mail: [email protected] | www.tranberg.com
Tranberg Systems | Hjulmagervej 15C | 7100 Vejle | Denmark | Tel.: [phone]
E-mail: [email protected] | www.tranbergsystems.com
TEF 2500 420/620
FLOODLIGHT HPS, 2 X 400W/600W
USER MANUAL
IMPORTANT
Read this instruction carefully before installing the
product
TUM 1017
2500420_TEGNI

TEF 2500 420/620 FLOODLIGHT HPS 2x400W/600W USER MANUAL
INTRODUCTION
Thank you for purchasing this product!
For installation, maintenance and assurance of a long life
of this product, please follow this manual.
CONTENT IN BOX
The product is fully assembled, and ready for installation.
SAFETY PRECAUTIONS
Note that changes made to the product and/or installation
of components which do not conform to the approval,
may be a safety violation. The manufacturer will in no
circumstance be held responsible for such activity.
For your health and safety, always use safety gear suited
for the task. Be certain to follow codes, regulations and/or
specific procedures that are related to the installation.
TOOLS REQUIRED
Regular tools required for installation:
• Flat small screwdriver
• PH 1 screwdriver
• Wrench or similar for fastening the lamp
MAINTENANCE INSTRUCTIONS
The light should be inspected according to Company
routines. The manufacturer suggests regular check for
water intrusion/condensation which should be removed
immediately. Check the drain plug / drain hole function.
When cleaning, use only mild detergents. Alcohol or
petroleum based products may damage lens, paint or
plastic components.
INSTALLATION INSTRUCTIONS
APPLICATIONS
• Ships
• Yachts
• Fishing vessels
• Offshore and industrial installations
APPROVALS
NA
220-240 VAC
LAMP BALLAST
BOX

TEF 2500 420/620 FLOODLIGHT HPS 2x400W/600W USER MANUAL
SPARE PARTS
Description Part No.
Stainless steel glass-holding frame complete with U-profile silicone gasket
Hard glass pane 405 x 425 x 4mm 5045 0020
U-profile silicone gasket 413 x 433mm 5045 0029
Lamp holder E40
The installated cable gland is suited for cables with
diameters ranging from 8,5 to 13,5mm.
A replacement kit is supplied and should be used for cable
diameters ranging from 13 to 17mm
Be sure to install the cable in a way wich prevents
water to penetrate into the enclosure through the
cable gland
CABLE GLANDS
NOTE:
The floodlight must only be connected to mains via a
ballast box
Internal connection External connection
B
Lp
N
Imax
4,6A
Ground
L
N
Lamp
Light source 1
B
Lp
N
Imax
4,6A
Ground
L
N
Lamp
Light source 2
Mounting arrangement

Tranberg AS | P.O. Box 8033 | N-4068 Stavanger | Norway | Tel.: [phone] | Fax.: [phone]
E-mail: [email protected] | www.tranberg.com
Tranberg Systems | Hjulmagervej 15C | 7100 Vejle | Denmark | Tel.: [phone]
E-mail: [email protected] | www.tranbergsystems.com
TEF 2500 420/620 FLOODLIGHT HPS 2x400W/600W USER MANUAL
TECHNICAL DATA
Housing: Glass-holding frame, latches and bracket made out of stainless steel,
Powercoated (RAL 9018) casing. Hard glass pane, resistant against
temperature changes
Input voltage: 220 - 240V AC 50Hz
Lamp: Standard: HPS 400W / 600W
Option: HPI 400W (Metal halide)
Narrow beam 50Hz
Lamp holder: E40
Mounting: 2 mounting holes: Ø13
IP-rating: IP67 ( According to EN60529)
Standard cable entries: Brass M24 cable glands
Cable: 8,9 - 10,4mm
Weight: 13,5 kg.
DESCRIPTION
Part No.
Floodlight HPS 2 x 400W, 220V AC 50Hz 2500 420
Floodlight HPS 2 x 600W, 240V AC 50Hz 2500 420
*Narrow beam on request