Transcend TS-DPD6N User manual

User’s Manual
Docking Station
TS-DPD6N
(Version 1.3)

1
Table of Contents
1. Introduction.....................................................................................................................................2
1-1 Docking Station Overview................................................................................................. 2
1-2 Package Content................................................................................................................ 4
2. Installation Guide...........................................................................................................................6
2-1 Getting Started.................................................................................................................... 6
2-2 Administrative Setup.......................................................................................................... 9
2-3 Reset Device..................................................................................................................... 12
2-4 Firmware Update.............................................................................................................. 13
3. Specifications............................................................................................................................... 15
4. Frequently Asked Questions..................................................................................................... 16
5. Recycling and Environmental Protection.................................................................................17
6. Two-year Limited Warranty........................................................................................................ 18
6-1 Limitations.......................................................................................................................... 18
6-2 Transcend Warranty Policy............................................................................................. 18
7. GNU General Public License (GPL) Disclosure.....................................................................19
8. End-User License Agreement (EULA)..................................................................................... 19
9. Federal Communications Commission (FCC) Statement.....................................................22

2
1. Introduction
1-1 Docking Station Overview
Transcend’s DPD6N networked docking station is designed specifically for the DrivePro™ Body
30/60 and offers a complete charging, data upload, and camera management solution. Users are
allowed to effortlessly charge multiple DrivePro™ Body 30/60 devices at one go, while files
(including video recordings and snapshots) may also be shared to an external storage device via a
USB port.
To provide scalability and fast deployment, the docking station is equipped with two Ethernet ports,
including a LAN port and a WAN port, as well as one USB 3.0 port, which is backwards compatible
with USB 2.0. All ports are located on the right side of the docking station. The LAN port is for
administrative setup specifically, using a fixed IP address to ensure that the settings are not at the
risk of hackers or invasions from external networks. The WAN port, on the other hand, is for data
upload to a designated folder while charging.
Notice:
1. The USB port can only be connected to an external device, and not with personal computers.
2. For the best security of your data, the WAN port IP, which can be modified, ought not to share the
same domain with the LAN port IP, which cannot be modified.
Top View
LED Power Indicator
6 Charging Ports for Body Cameras

3
Back View
Functions & Description
Six charging ports:
The six ports allow for up to six DrivePro Body cameras to charge and upload at the same
time.
LED Power Indicator:
When connected to a power supply source, turn the Power Switch on. The LED Power
Indicator will begin by first slowly flashing red, before turning solid red when the connection is
finished.
Right Side View
Power Switch
(ON/OFF)
Power Supply
(19V/3.42A)

4
Functions & Description
LAN port:
For administrative setup
Fixed IP
WAN port:
For data transmission (via network connection)
IP can be modified
USB 3.0 port:
For exporting data to an external storage device (via USB cable)
Backwards compatible with USB 2.0
1-2 Package Content
Your DPD6N package comes with the following contents:
Six-port docking station

5
Ethernet cables (2 pcs) Power adapter
Quick Start Guide

6
2. Installation Guide
2-1 Getting Started
When installing your DPD6N for the first time, please follow the steps below:
1. Plug in the power adapter and turn the power switch on.
2. Connect one Ethernet cable from the LAN port to the computer’s Internet port.

7
3. Connect the other Ethernet cable from the WAN port to an active Internet port.
4. Be sure to have both the LAN port and the WAN port connected to their respective internet ports,
before proceeding to the next step. If either one of the two cables is not plugged in, auto backup
setup will fail.
5. Change IP address to 10.10.0.100.
6. Open the browser and link to http://10.10.0.1.

8
7. Enter the default user name “admin” and password “12345678” to log in.

9
2-2 Administrative Setup
After logging in as administrator, complete the instructions on the web page:

10
1. In Language, select your language.
2. In Auto backup, choose your desired backup destination. Select “USB Storage” to back up
data to an external storage space. Select “Network” for backing up to a regional network space.
Entering of storage location and ID information is required.
If you encounter problems while installing the DPD6N, please check Transcend’s FAQ page at:
https://www.transcend-info.com/Support/No-786)
3. If your DrivePro Body 30/60 is password protected, in Auto Unlock, you may set the
password for the DPD6N to automatically unlock the body camera.
4. In Change login password, you may change the default login password “12345678” to new
passwords. Notice: The default user name “admin” is not modifiable.
5. Modify the WAN IP address in Change IP address to back up data to your desired external
network area.
Notice: This option is for changing the WAN IP only. LAN IP should still be http://10.10.0.100,
and, if must be altered, must not share the same network domain with the WAN IP address for
the best security of your data.

11
6. Setup is complete. Start charging the DrivePro™ Body and uploading data simultaneously.

12
2-3 Reset Device
To reset the DPD6N or when the login password is forgotten, click on “Reset Device”.

13
2-4 Firmware Update
1. Open your browser. Link to Transcend’s Support & Download website at:
www.transcend-info.com/support/service.
2. Find the firmware update file for TS-DPD6N Docking Station. Download and unzip.
3. Connect one Ethernet cable from the LAN port to the computer’s Internet port.
4. Change the computer’s IP address to 10.10.0.100
5. Double click DPD6N_Update_Tool.exe
6. Click on Update and wait for the update to complete.

14
7. If the update is successful, you will see the image below.

15
3. Specifications
Dimensions 423 mm (L) × 105 mm (W)× 54 mm (H)
(16.65” x 4.13” x 2.13”)
Weight 980g (34.57 oz)
USB Interface USB 3.0 (backwards compatible with USB2.0)
Network Port WAN: 10/100/1000 Mbps Ethernet
LAN: 10/100 Mbps Ethernet
Power Supply 19V / 3.42A
Operating Temperature 0°C (32°F) ~ 40°C (104°F)
Storage Temperature -20°C (-4°F) ~ 70°C (158°F)
Certification CE, FCC, BSMI, C-Tick, KC
Warranty
2-Year Limited Warranty
* Please access the Transcend website for more
information about the Transcend Warranty Policy.
System Requirements
Desktop or notebook computer with an Internet port,
and one of the following operating systems:
Microsoft Windows 7
Microsoft Windows 8
Microsoft Windows 8.1
Microsoft Windows 10
* Environmental conditions may increase or decrease specifications

16
4. Frequently Asked Questions
If you have any question or if a problem occurs to your Docking Station, please first check the instructions
listed below before sending your DPD6N for repair. If you cannot find any ideal solution to your question below,
please consult your dealer, service center, or local Transcend branch office for further help. You can also visit
the Transcend website (http://www.transcend-info.com/) for more FAQs and Technical Support services
(http://www.transcend-info.com/Support/contact_form).
What are the transfer speeds of DPD6N?
DPD6N transfers data through either network connection or USB connection. Their speeds are as
follows:
1. The transfer speed of DPD6N via network connection is about 16MB/s.
2. The transfer speed of DPD6N via a USB port (with USB3.0) is about 10MB/s.
* Please note that the USB port can only be connected with an external device, and not to personal PCs.
* The transfer speeds will be subject to the platforms and network conditions (e.g. whether it's USB3.0 or
USB2.0, or the bandwidth of the Wi-Fi router),
How long does it take for a completely depleted DrivePro Body 30 battery to be recharged?
It takes about 4.5 hours for a completely depleted DrivePro Body 30 battery to be fully charged with
DPD6N.

17
5. Recycling and Environmental Protection
Recycling the Product (WEEE): Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused. When you see the crossed-out wheel
bin symbol attached to a product, it means that the product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other household waste. Please inform yourself about the local
rules on the separate collection of electrical and electronic products. The correct disposal of your old
product helps prevent potential negative consequences on the environment and human health.
Battery Disposal: Your product contains a built-in rechargeable battery covered by the European
Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform
yourself about the local rules on separate collection of batteries. The correct disposal of batteries
helps prevent potentially negative consequences on the environment and human health.
For products with non-exchangeable built in batteries: The removal of (or the attempt to remove) the
battery invalidates the warranty. This procedure is only to be performed at the end of the product’s
life.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

18
6. Two-year Limited Warranty
This product is covered by a Two-year Limited Warranty. Should your product fail under normal use within
two years from the original purchase date, Transcend will provide warranty service pursuant to the terms of
the Transcend Warranty Policy. Proof of the original purchase date is required for warranty service.
Transcend will inspect the product and in its sole discretion repair or replace it with a refurbished product or
functional equivalent. Under special circumstances, Transcend may refund or credit the current value of the
product at the time the warranty claim is made. The decision made by Transcend shall be final and binding
upon you. Transcend may refuse to provide inspection, repair or replacement service for products that are
out of warranty, and will charge fees if these services are provided for out-of-warranty products.
6-1 Limitations
Any software or digital content included with this product in disc, downloadable, or preloaded form, is not
covered under this Warranty. This Warranty does not apply to any Transcend product failure caused by any
accident, abuse, mishandling or improper usage (including use contrary to the product description or
instructions, outside the scope of the product’s intended use, or for tooling or testing purposes), alteration,
abnormal mechanical or environmental condition (including prolonged exposure to humidity), acts of nature,
improper installation (including connection to incompatible equipment), or problems with electrical power
(including undervoltage, overvoltage, or power supply instability). In addition, damage or alteration of
warranty, quality or authenticity stickers, and/or product serial or electronic numbers, unauthorized repair or
modification, or any physical damage to the product or evidence of opening or tampering with the product
casing will also void this Warranty. This Warranty shall not apply to the transferees of Transcend products
and/or anyone who stands to profit from this Warranty without Transcend’s prior written authorization. This
Warranty only applies to the product itself, and excludes integrated LCD panels, rechargeable batteries, and
all product accessories (such as card adapters, cables, earphones, power adapters, and remote controls).
6-2 Transcend Warranty Policy
Please visit www.transcend-info.com/warranty to view the Transcend Warranty Policy. By using the product, you agree
that you accept the terms of the Transcend Warranty Policy, which may be amended from time to time.
Transcend Information, Inc.
www.transcend-info.com
*The Transcend logo is a registered trademark of Transcend Information, Inc.
*The specifications mentioned above are subject to change without notice.
*All logos and marks are trademarks of their respective companies.

19
7. GNU General Public License (GPL) Disclosure
Firmware incorporated into this product and/or software used for this product may include third party
copyrighted software licensed under the GPL (hereinafter referred to as “GPL Software”). In
accordance with the GPL, if applicable: 1) the source code for the GPL Software may be
downloaded at no charge or obtained on CD for a nominal charge by calling Customer Support
within three years of the date of purchase; 2) you may copy, re-distribute and/or modify the GPL
Software under the terms of the GNU General Public License as below or any later version, which
may be obtained at http://www.gnu.org/licenses/gpl.html; 3) the GPL Software is distributed
WITHOUT ANY WARRANTY, without even implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. The entire risk as to the quality and performance of the GPL
Software is with you. Transcend does not provide any support for the GPL software.
8. End-User License Agreement (EULA)
Software license terms and conditions
1. Generally. Transcend Information, Inc. ("Transcend") is willing to grant the following license to
install or use the software and/or firmware (“Licensed Software”) pursuant to this End-User License
Agreement (“Agreement”), whether provided separately or associated with a Transcend product
(“Product”), to the original purchaser of the Product upon or with which the Licensed Software was
installed or associated as of the time of purchase ("Customer") only if Customer accepts all of the
terms and conditions of this Agreement. PLEASE READ THESE TERMS CAREFULLY. USING
THE SOFTWARE WILL CONSTITUTE CUSTOMER'S ACCEPTANCE OF THE TERMS AND
CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS AND
CONDITIONS OF THIS AGREEMENT, DO NOT INSTALL OR USE THE LICENSED SOFTWARE.
2. License Grant. Transcend grants to Customer a personal, non-exclusive, non-transferable,
non-distributable, non-assignable, non-sublicensable license to install and use the Licensed
Software on the Product in accordance with the terms and conditions of this Agreement.
3. Intellectual Property Rights. As between Transcend and Customer, the copyright and all other
intellectual property rights in the Licensed Software are the property of Transcend or its supplier(s)
or licensor(s). Any rights not expressly granted in this License are reserved to Transcend.
4. License Limitations. Customer may not, and may not authorize or permit any third party to: (a)
use the Licensed Software for any purpose other than in connection with the Product or in a manner