Transcend StoreJet 35T3 User manual

User’s Manual
3.5" External Hard Drive
StoreJet
®
35T3
(Version 1.4)

Table of Contents
Introduction︱
︱︱
︱......................................................................................1
Features︱
︱︱
︱............................................................................................2
System Requirements︱
︱︱
︱.....................................................................2
Safety Precautions︱
︱︱
︱...........................................................................3
General Use ....................................................................................................................... 3
Setup .................................................................................................................................. 3
Backing-Up and Storing Data........................................................................................... 3
Power ................................................................................................................................. 4
Reminders.......................................................................................................................... 4
Product Overview︱
︱︱
︱.............................................................................5
Connecting to a Computer︱
︱︱
︱..............................................................6
One Touch Auto-Backup Button︱
︱︱
︱....................................................8
Disconnecting from a Computer︱
︱︱
︱....................................................9
Windows ............................................................................................................................ 9
Mac OS ............................................................................................................................... 9
Linux................................................................................................................................. 10
Formatting the Hard Drive︱
︱︱
︱.............................................................11
Windows XP/Vista/7/8 ..................................................................................................... 11
Mac OS ............................................................................................................................. 13
Linux................................................................................................................................. 15
Troubleshooting︱
︱︱
︱.............................................................................16
Recycling & Environmental Considerations︱
︱︱
︱...............................18
Three-year Limited Warranty︱
︱︱
︱........................................................19

1
Introduction︱
Congratulations on purchasing Transcend’s StoreJet



35T3.This stylish, versatile, high-speed
USB storage device is the perfect data management system for uploading, downloading, storing
and transferring your vital data and information. With its One Touch Auto-Backup button and
real-world transfer speeds up to 3X faster than USB 2.0 (in USB 3.0 mode), the compact StoreJet
35T3 is quick and easy way to store and back-up essential files, folders, documents, photos,
music and videos. In addition, the StoreJet 35T3 comes with very useful software* that can
increase your storage productivity and security. This User’s Manual is designed to help you get
the most from your new device, please read both in detail before using the StoreJet 35T3.
Note:
1. The StoreJet 35T3 comes bundled with Transcend Elite, which enables the StoreJet’s One Touch
Auto-Backup button (available on select StoreJet models only). See the Elite Software User’s
Manual for details. The Transcend Elite software is also available for download at
www.transcend-info.com/downloads .
2. The StoreJetToolBox only works in Windows—Please see the “Formatting the Hard Drive” section
of this manual for more information. The StoreJetToolBox software is also available for download
at www.transcend-info.com/downloads.
3. To use the Mac OSX Time Machine function, please format the StoreJet drive to HFS+ first — (see
“Formatting the Hard Drive – Mac OS”)

2
Features︱
SuperSpeed USB 3.0 compliant and backwards compatible with USB 2.0
Space-saving upright design – no stand needed
One Touch Auto-Backup button
Power-saving sleep mode
Fanless low-noise operation
Easy Plug and Play installation – no drivers required
Extra-large storage capacity for backing-up files
Includes Transcend Elite backup and security software
LED power / data transfer activity indicator
System Requirements︱
Desktop or notebook computer with a working USB port.
One of following operating systems:
USB 3.0 Models: USB 2.0 Models:
• Windows

XP • Windows

XP
• Windows Vista

• Windows Vista

• Windows

7 • Windows

7
• Windows

8 • Windows

8
• Linux

Kernel 2.6.31+ • Linux

Kernel 2.4.2+
• Mac

OS X 10.5+ • Mac

OS 9+

3
Safety Precautions︱
These usage and safety guidelines are IMPORTANT! Please follow them carefully.
General Use
• Unpack the contents of the StoreJet 35T3 package carefully.
• Avoid exposing your StoreJet 35T3 to extreme temperatures above 55℃or below 5℃
during operation.
• Never drop your StoreJet 35T3.
• Never allow your StoreJet 35T3 to come in contact with water or any other liquids.
• Never use a damp/wet cloth to wipe or clean the exterior case.
• Do not user or store your StoreJet 35T3 in any of the following environments:
oDirect sunlight
oNext to an air conditioner, electric heater or other heat sources
oIn a closed car that is in direct sunlight
oIn an area with strong magnetic fields or excessive vibration
• If your Windows computer does not boot while the StoreJet 35T3 is connected, please
disconnect the StoreJet 35T3 from your computer and reconnect the StoreJet 35T3 after
Windows has started. Otherwise, refer to your computer's manual and change the BIOS
settings to instruct the computer to boot from a different device.
Setup
• Place the StoreJet 35T3 on a flat, stable surface where it cannot be accidentally kicked
or bumped
• Ensure that none of the ventilation holes on the outer case are blocked or covered.
• Only use the USB 3.0 cable that came with the StoreJet 35T3 to connect it to a computer,
and always ensure that the cable is in good condition. NEVER use a cable that is frayed
or damaged.
Backing-Up and Storing Data
• Transcend does NOT take any responsibility for data loss or damage during
operation. If you decide to store data on your StoreJet 35T3, we strongly advise that
you regularly backup the data to a computer, or other storage medium.
• To ensure Super-Speed USB 3.0 data transfer rates when using your StoreJet 35T3,
please make sure that your computer has the relevant drivers and hardware to support
USB 3.0. If you are unsure about how to check this, please consult the user’s manual of
your computer, motherboard, or USB 3.0 interface card for USB 3.0 driver information.

4
Power
• The StoreJet 35T3 is powered from your home’s power outlet using the included power
adapter. Do not use any other power adapter with the StoreJet 35T3.
• Ensure nothing is resting on the power or USB cable and that the cables are not located
where they can be tripped over or stepped on.
Reminders
• Always follow the procedures in the “Disconnecting from a Computer” section to
remove the StoreJet from your computer.

5
Product Overview︱
A
One Touch Backup Button
B
LED Indicator
C
Anti-slip Rubber Feet
D
DC Power Input Jack
E USB Port
F Security Lock Attachment

6
Connecting to a Computer︱
1. Attach the included 2-pin or 3-pin (country/region dependant) power connector to the USB
Power Adapter by sliding it until it clicks into place.
2. Connect the Power Adapter cord to the round-shaped DC IN jack on the back of the
StoreJet 35T3 and plug the Power Adapter into your home’s power outlet.
3. Plug the square end (1) of the USB 3.0 cable into the USB port on the StoreJet 35T3.
USB 3.0
Type-B
Connector
USB 2.0 / 3.0
Connector
USB 3.0 Cable
StoreJet 35T3
SuperSpeed USB 3.0 Port USB 2.0 Port USB 3.0 Port
4. Plug the rectangular end (2) of the USB 3.0 cable into an available USB 2.0 or USB 3.0
port on your desktop or notebook computer.
Note:
To get the best performance results from your drive, we recommend using the USB 3.0
interface (currently not supported on Mac computers).

7
5. When the StoreJet 35T3 is successfully connected to a computer, its LED will light up. In
Windows, a new Local Disk drive with a newly-assigned drive letter will appear, and a
Removable Hardware icon will appear on the Windows System Tray. The StoreJet 35T3’s
internal hard drive comes pre-formatted to FAT32, which is compatible with most computer
systems, including Windows, Mac, Linux, and more.
•Computers running Windows and Mac OS will automatically detect and install the StoreJet 35T3. To use
USB 3.0, please ensure your computer has all necessary USB 3.0 drivers installed, and make sure you
plug the USB Cable into the correct port on your computer (USB 3.0 ports are usually color-coded to
differentiate them from USB 2.0)
• Linux users may have to configure the StoreJet 35T3 manually. To do this, first create a directory for the
StoreJet 35T3 (Example: mkdir /mnt/storejet). Then, mount the StoreJet 35T3 (Example: mount –a –t
msdos /dev/sda1 /mnt/Storejet)
*(G:) is an example drive letter, the drive letter in your Windows computer may differ

8
Note: “New Volume” is an example drive. The drive name on your Mac computer may differ
6. Once connected, you can use the StoreJet 35T3 as an external hard drive to transfer data
to and from your computer. Simply drag and drop files or folders onto the Local Disk,
Volume,or Drive Letter that represents the StoreJet 35T3.
One Touch Auto-Backup Button︱
︱︱
︱
The StoreJet 35T3 is equipped with a convenient One Touch Auto-Backup button that you can use
to instantly backup and synchronize your data. Installing the Transcend Elite software enables
the Auto-backup button, along with useful data-management tools and 256bit AES file security.
(Please see the Transcend Elite Software User’s Manual for detailed instructions on how to use Transcend
Elite)